Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Injector Pipe Replacement on the Case 850D Dozer
#1
When restoring a Case 850D dozer after extended downtime, one of the most common issues encountered is fuel delivery problems—often traced to damaged or missing injector pipes. These high-pressure lines are critical for delivering fuel from the injection pump to each cylinder, and even a minor crack or misfit can cause misfires, poor performance, or fuel leaks.
Machine Background and Engine Configuration
The Case 850D crawler dozer was introduced in the late 1980s as part of Case’s long-running 850 series. It was powered by a naturally aspirated or turbocharged diesel engine, depending on configuration, and used either a CAV Lucas or Bosch VE injection pump. These engines were known for their mechanical simplicity and field serviceability, making them popular in forestry, grading, and agricultural applications.
  • Engine type: 4-cylinder diesel, naturally aspirated or turbocharged
  • Fuel system: Mechanical direct injection
  • Injector pipe layout: Individual steel lines from pump to each injector
  • Common failure: Cracked or broken #4 injector pipe due to vibration or corrosion
Correct Part Numbers Based on Configuration
The part number for the injector pipe depends on whether the machine is equipped with a naturally aspirated or turbocharged engine, as well as the type of injection pump:
  • Naturally aspirated engine with CAV Lucas pump
    CNH part number: J914802
    Cummins equivalent: 3914802
  • Turbocharged engine with Bosch VE pump
    CNH part number: J903488
    Cummins equivalent: 903488
These lines are precision-bent to match the routing and fitting angles of the engine. Using the wrong part can result in misalignment, stress fractures, or fuel leaks at the banjo fittings.
Repair vs. Replacement Options
In cases where the original pipe is only slightly damaged, repair may be possible:
  • Brazing or silver soldering small cracks, followed by pressure testing
  • Re-flaring ends if the sealing surface is worn
  • Custom fabrication by a diesel injection shop using the original as a template
However, for high-pressure lines, replacement is generally safer and more reliable. Many diesel shops can fabricate new lines using high-grade steel tubing and metric fittings, especially if OEM parts are backordered or discontinued.
Installation Tips and Precautions
  • Clean all fittings thoroughly before installation to prevent contamination
  • Use new sealing washers or banjo bolts if applicable
  • Torque fittings to spec—over-tightening can deform the flare and cause leaks
  • Prime the fuel system after installation to remove air
  • Check for leaks under load after the engine reaches operating temperature
A dozer operator in New South Wales shared that after replacing the #4 injector pipe and installing new injectors, his 850D started more smoothly and ran with noticeably less smoke. He also noted that the replacement pipe arrived faster from a local diesel shop than from the OEM dealer, and cost 40% less.
Conclusion
Replacing an injector pipe on a Case 850D is a straightforward but critical repair that restores proper fuel delivery and engine performance. By identifying the correct part number based on engine configuration and sourcing from either OEM or reputable diesel shops, operators can minimize downtime and avoid costly misfires or leaks. Whether repairing or replacing, attention to detail during installation ensures long-term reliability in the field.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Case 580D: Dealing with Water in the Oil and Head Gasket Issues MikePhua 0 3 Yesterday, 07:57 PM
Last Post: MikePhua
  Safely Dismounting the Backhoe from a Case 580CK MikePhua 0 3 Yesterday, 07:57 PM
Last Post: MikePhua
  Rear Control Valve Rebuild for Case 580C MikePhua 0 3 Yesterday, 07:54 PM
Last Post: MikePhua
  Bucket Cylinders on Case 590 SM: Troubleshooting and Solutions MikePhua 0 3 Yesterday, 07:50 PM
Last Post: MikePhua
  Fuel Pump Replacement Challenges on the CAT 303CR Mini Excavator MikePhua 0 1 Yesterday, 07:47 PM
Last Post: MikePhua
  Case 9030B Excavator: Troubleshooting Common Issues MikePhua 0 1 Yesterday, 07:44 PM
Last Post: MikePhua
  Removing the Declutching Solenoid on a Case 580E MikePhua 0 1 Yesterday, 07:39 PM
Last Post: MikePhua
  Repairing the Instrument Cluster Circuit Board on a Case 580L MikePhua 0 1 Yesterday, 07:39 PM
Last Post: MikePhua
  Replacing Drive Motors on the Case 75XT MikePhua 0 3 Yesterday, 06:43 PM
Last Post: MikePhua
  Case Backhoe Legacy and Troubleshooting Essentials MikePhua 0 1 Yesterday, 06:23 PM
Last Post: MikePhua
  Track Replacement and Undercarriage Renewal on a Crawler Loader MikePhua 0 1 Yesterday, 06:20 PM
Last Post: MikePhua
  Forward Drive Weakness on Case 580K Phase 1 Loader MikePhua 0 2 Yesterday, 06:15 PM
Last Post: MikePhua
  Troubleshooting Monitor Errors on the Komatsu D275AX-5 Dozer MikePhua 0 3 Yesterday, 06:08 PM
Last Post: MikePhua
  Volvo EC55B Engine Replacement Considerations MikePhua 0 1 Yesterday, 06:00 PM
Last Post: MikePhua
  Injector Return Line Leaks on the Case 580CK Diesel Engine MikePhua 0 1 Yesterday, 05:58 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)