Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Kobelco Mark3 SK150LC Excavator Error Codes
#1
The Kobelco Mark3 SK150LC is a widely used medium-sized tracked excavator in construction and digging applications. Like any heavy equipment, the SK150LC may encounter various error codes during prolonged usage. These error codes can typically be read using diagnostic tools, helping technicians quickly identify issues and perform necessary repairs. This article discusses common error codes, their causes, and the corresponding solutions to help users effectively manage faults.
Common Error Codes
  1. Code 503 (ECU Communication Error)
    Error code 503 indicates a communication problem between the electronic control units (ECU). This issue is often caused by loose electrical connections or faulty sensors. Check all related electrical connections and connectors for corrosion or damage. If necessary, reconnect or replace any damaged components.
  2. Code 113 (Engine Overheating)
    When code 113 appears, it indicates that the engine temperature is too high. To resolve this, inspect the radiator and cooling system to ensure there are no blockages or leaks. Check the coolant level and ensure the water pump and coolant lines are functioning correctly. An ineffective cooling system can lead to engine failure if not addressed promptly.
  3. Code 245 (Hydraulic System Failure)
    Error code 245 suggests an issue with the hydraulic system. Possible causes include low hydraulic oil levels, a malfunctioning hydraulic pump, or faulty hydraulic valves. Check the hydraulic oil level and quality, ensuring there is no contamination. If the oil is in good condition, inspect the hydraulic pump and valves for leaks or malfunctions.
  4. Code 402 (Low Battery Voltage)
    Code 402 indicates low battery voltage. Check the battery voltage and the electrical system to ensure proper charging. If the battery voltage remains low, the charging system, such as the alternator or voltage regulator, may be malfunctioning and should be inspected further.
Troubleshooting Steps
  1. Use Diagnostic Tools
    Use a specialized diagnostic tool to read the error codes and verify the specific issue. Diagnostic tools not only provide error codes but also help detect potential electrical or mechanical problems.
  2. Inspect Electrical Connections
    Ensure that all electrical connections are secure and free from corrosion, particularly those related to sensors, control units, and hydraulic systems. If any loose connections or corrosion are found, clean and reconnect the components.
  3. Inspect the Hydraulic System
    Regularly check the hydraulic oil for quality and quantity. Contaminated or low hydraulic oil can lead to hydraulic system failures. If the oil level is normal, further inspect the hydraulic pump, valves, and hoses for leaks or malfunctions.
  4. Inspect the Cooling System
    In the case of engine overheating, first check if the coolant is at the correct level and ensure the radiator is not blocked. If the issue persists, the water pump may need to be inspected, or there could be leaks in the coolant lines.
  5. Check the Battery and Charging System
    If low battery voltage is detected, inspect the battery for signs of wear or damage. Additionally, check the charging system, including the alternator and voltage regulator, to ensure they are functioning correctly.
Solutions
  1. Reset the Fault Codes
    After diagnosing and resolving the issue, use the diagnostic tool to clear the fault codes. If the problem has been fixed, the machine should no longer display the corresponding error codes.
  2. Replace Faulty Components
    If it is confirmed that a component (e.g., battery, hydraulic pump, sensors) is faulty, replace the damaged part immediately. Be sure to use OEM parts to ensure the equipment’s long-term reliability and optimal performance.
  3. Regular Maintenance and Inspections
    To prevent future issues, regular maintenance and inspections are essential. Periodically change hydraulic oil, check the battery, clean the radiator, and ensure all systems are functioning properly. Routine maintenance will extend the lifespan of the equipment and minimize downtime.
Conclusion
The Kobelco Mark3 SK150LC excavator may experience common error codes such as engine overheating, low battery voltage, and hydraulic system failures over time. Using diagnostic tools to read error codes and following the proper troubleshooting steps can help pinpoint and resolve the issues efficiently. Regular maintenance and proactive inspections are key to preventing breakdowns and ensuring the excavator operates at peak performance. With proper care, the SK150LC can continue to perform reliably on job sites.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Common Issues with the Kobelco SK75UR and How to Address Them MikePhua 0 4 28 minutes ago
Last Post: MikePhua
  Common Issues and Solutions for Kobelco SK100 Mark 5 Excavator MikePhua 0 3 2 hours ago
Last Post: MikePhua
  1996 Kobelco SK220-3 Electrical Problems and Troubleshooting MikePhua 0 1 2 hours ago
Last Post: MikePhua
  Kobelco SK210 Excavator Fault Diagnosis and Solutions MikePhua 0 3 5 hours ago
Last Post: MikePhua
  PC130-6 Excavator Fault Codes and Diagnostic Solutions MikePhua 0 1 5 hours ago
Last Post: MikePhua
  Traction Lock Solenoid Short to Ground Error Code Troubleshooting MikePhua 0 4 8 hours ago
Last Post: MikePhua
  Takeuchi TL8 Error Codes Troubleshooting MikePhua 0 8 9 hours ago
Last Post: MikePhua
  CAT 262D Fuel Pump Pressurizing Error Code 1347-4 Troubleshooting and Solutions MikePhua 0 11 Today, 09:31 AM
Last Post: MikePhua
  Bobcat Repaint: How to Get the Color Codes MikePhua 0 10 Today, 09:23 AM
Last Post: MikePhua
  Troubleshooting 2019 CAT 239D3 with Codes 2685-8 and 2686-8 MikePhua 0 13 Today, 04:08 AM
Last Post: MikePhua
  Bobcat T870 Error Code E0005246-22: Troubleshooting and Solutions MikePhua 0 10 Today, 01:29 AM
Last Post: MikePhua
  JD 326E EMU Codes Troubleshooting and Solutions MikePhua 0 12 Today, 12:36 AM
Last Post: MikePhua
  Bobcat T770 AUX and Main No Communication Error Troubleshooting MikePhua 0 11 Yesterday, 11:24 PM
Last Post: MikePhua
  SVL 75-2 Error Code 9101 Troubleshooting MikePhua 0 11 Yesterday, 08:50 PM
Last Post: MikePhua
  Takeuchi TL8 Trouble Codes: Diagnosis and Solutions MikePhua 0 11 Yesterday, 06:29 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)