SVL 75-2 Error Code 9101 Troubleshooting

[MikePhua]

A user encountered error code 9101 while operating the SVL 75-2, causing the machine to malfunction. This error code is typically related to electrical system or sensor failures. The issue might involve unstable voltage, loose circuit connections, or sensor faults.
Possible Causes
Based on forum discussions, several factors could trigger this error code:

1. Loose Electrical Connections: Loose wires or connectors can cause voltage instability or signal loss, triggering error code 9101.
   
2. Sensor Failure: A malfunctioning sensor might fail to transmit the correct signals to the control system, leading to the error code.
   
3. Low Battery Voltage: A low battery voltage can cause the electrical control system to malfunction, triggering error code 9101.
   

Troubleshooting Steps

1. Check Electrical Connections: Ensure all electrical connections are secure, particularly those between the battery, sensors, and the control unit.
   
2. Inspect Sensors: If any sensors are malfunctioning, replacing them might resolve the issue and restore normal machine operation.
   
3. Verify Battery Voltage: Ensure the battery voltage is within the required range. If the battery voltage is low, try charging or replacing the battery.
   
4. Reset the System: After performing the checks and adjustments, try resetting the machine’s electronic control system to see if the issue is resolved.
   

Conclusion
Error code 9101 is generally linked to electrical or sensor issues. By inspecting the electrical connections, sensors, and battery voltage, you can effectively troubleshoot and restore the machine to normal operation.