1 hour ago
The Case 350 Dozer and Its Legacy
The Case 350 crawler dozer, introduced in the late 1960s and continuing into the early 1970s, was part of J.I. Case’s push to offer compact, reliable machines for small contractors, farmers, and municipalities. With an operating weight around 10,000 pounds and powered by a 4-cylinder diesel engine, the 350 was known for its simplicity, mechanical durability, and ease of field repair. It featured a torque converter shuttle transmission, which allowed for quick directional changes—ideal for grading, clearing, and light earthmoving.
J.I. Case, founded in 1842, had already established itself as a leader in agricultural and construction machinery. By the time the 350 series was released, Case had sold tens of thousands of crawler tractors globally, with strong adoption in North America and parts of Europe.
Transmission Slippage and Heat-Related Failures
One common issue with aging Case 350 dozers is transmission slippage that worsens as the machine warms up. This symptom typically points to wear in the shuttle transmission, which shares design elements with later Case models like the 580C through early 580K. These transmissions use metal-bonded friction discs that engage under hydraulic pressure.
When slippage occurs only after the machine reaches operating temperature, the likely culprits include:
To isolate the issue:
Parts Availability and Manual Access
While original service manuals for the 1970 Case 350 are rare, parts diagrams and technical references are still accessible through online repositories and vintage equipment dealers. The transmission components—especially clutch packs and seals—are often interchangeable with later Case models, making sourcing easier.
Recommended parts sources include:
To extend the life of the transmission:
The 1970 Case 350 dozer remains a capable and respected machine in the vintage equipment community. Transmission slippage, especially under heat, is a solvable issue with proper diagnostics and parts knowledge. By understanding the shared design lineage with later Case models and applying methodical troubleshooting, operators can restore performance and keep these classic machines working for years to come. In the world of legacy iron, knowledge and patience are the most powerful tools.
The Case 350 crawler dozer, introduced in the late 1960s and continuing into the early 1970s, was part of J.I. Case’s push to offer compact, reliable machines for small contractors, farmers, and municipalities. With an operating weight around 10,000 pounds and powered by a 4-cylinder diesel engine, the 350 was known for its simplicity, mechanical durability, and ease of field repair. It featured a torque converter shuttle transmission, which allowed for quick directional changes—ideal for grading, clearing, and light earthmoving.
J.I. Case, founded in 1842, had already established itself as a leader in agricultural and construction machinery. By the time the 350 series was released, Case had sold tens of thousands of crawler tractors globally, with strong adoption in North America and parts of Europe.
Transmission Slippage and Heat-Related Failures
One common issue with aging Case 350 dozers is transmission slippage that worsens as the machine warms up. This symptom typically points to wear in the shuttle transmission, which shares design elements with later Case models like the 580C through early 580K. These transmissions use metal-bonded friction discs that engage under hydraulic pressure.
When slippage occurs only after the machine reaches operating temperature, the likely culprits include:
- Worn friction discs that lose grip under thermal expansion
- Hydraulic fluid breakdown, reducing pressure and lubrication
- Internal seal leakage, causing pressure loss in clutch packs
- Contaminated or low fluid, which can introduce aeration and reduce engagement force
To isolate the issue:
- Check fluid levels and condition. Burnt smell or dark color indicates overheating or contamination.
- Inspect the shuttle filter and screen for debris or metal shavings.
- Measure hydraulic pressure at the test ports during cold and hot operation. A drop in pressure when hot suggests internal leakage.
- Observe engagement behavior in forward and reverse. If one direction slips more than the other, the issue may be isolated to a specific clutch pack.
Parts Availability and Manual Access
While original service manuals for the 1970 Case 350 are rare, parts diagrams and technical references are still accessible through online repositories and vintage equipment dealers. The transmission components—especially clutch packs and seals—are often interchangeable with later Case models, making sourcing easier.
Recommended parts sources include:
- Case CE legacy parts catalogs
- Agricultural salvage yards with older Case inventory
- Specialty rebuild kits for torque converter transmissions
To extend the life of the transmission:
- Change hydraulic fluid every 500 hours or annually
- Use Case-approved fluid or modern equivalents with anti-foaming and thermal stability additives
- Replace filters regularly and inspect for early signs of wear
- Avoid prolonged idling in gear, which can overheat clutch packs
- Warm up the machine gradually in cold weather to prevent seal damage
The 1970 Case 350 dozer remains a capable and respected machine in the vintage equipment community. Transmission slippage, especially under heat, is a solvable issue with proper diagnostics and parts knowledge. By understanding the shared design lineage with later Case models and applying methodical troubleshooting, operators can restore performance and keep these classic machines working for years to come. In the world of legacy iron, knowledge and patience are the most powerful tools.
