Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Case CX130 Security Code System
#1
The Case CX130 excavator is equipped with an anti-theft security system that requires an access code to start the engine. This feature enhances equipment security, particularly for machines operating in open or unsecured environments.
Activating the Security System
To activate the security system:
  1. Turn the Starter Switch: Place the starter switch key in the "ON" position.
  2. Engage the Anti-Theft Device: Turn the starter switch from "ON" to "OFF" and back to "ON" repeatedly, approximately every two seconds. Continue this cycle until the audible alarm sounds, indicating that the anti-theft device is now active.
  3. Shutdown Procedure: When shutting down the engine, turn the starter switch key to the "OFF" position. If the anti-theft device was activated during the shutdown, the system will require the entry of the access code upon the next startup.
Entering the Access Code
To start the engine after the anti-theft device has been activated:
  1. Turn the Starter Switch: Place the starter switch key in the "ON" position.
  2. Access Code Prompt: The display screen will show the message "Password" along with four blank boxes.
  3. Input the Code: Using the control buttons:
    • Press button (1) the number of times corresponding to the first digit of your code. For example, press once for "1", twice for "2", and so on.
    • Press button (2) to move to the next digit.
    • Repeat this process for all four digits of your access code.
  4. Confirm the Code: After entering all four digits, press button (2) to confirm. If the code is correct, the engine will start. If the code is incorrect, the system will not allow the engine to start.
Deactivating the Security System
To deactivate the security system:
  1. Locate the Security Wire: Behind the operator's seat, there is a wire in the harness that must be connected to another wire to deactivate the security function.
  2. Disconnect the Wire: If you prefer not to use the security system, disconnecting this wire will disable the feature. However, this is not recommended as it reduces the security of the equipment.
Important Notes
  • Record the Access Code: It is crucial to keep a record of your access code in a secure location. If the code is forgotten, it may not be possible to enter a new one without consulting your Case dealer.
  • Dealer Assistance: If you need to reset or change the access code, contact your authorized Case dealer for assistance.
  • Security Considerations: While deactivating the security system may seem convenient, it is advisable to keep the system active to protect your equipment from unauthorized use.
In summary, the Case CX130's security code system is a valuable feature for safeguarding your equipment. Proper activation, code management, and understanding of the system's operations are essential for maintaining security and ensuring smooth operation.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Restoring the Air Intake and Exhaust System on an International 3400A MikePhua 0 9 5 hours ago
Last Post: MikePhua
  Restoring Electrical Systems on a Case 580 Super K Backhoe MikePhua 0 9 5 hours ago
Last Post: MikePhua
  Case 1845C Skid Steer Tire Alignment Issues MikePhua 0 7 5 hours ago
Last Post: MikePhua
  Replacing Seat Cushions on a Case 850C MikePhua 0 11 5 hours ago
Last Post: MikePhua
  Diagnosing Slow Travel Issues on Case 750K and New Holland D75 Dozers MikePhua 0 6 6 hours ago
Last Post: MikePhua
  Why Is the 4WD Not Engaging on a Case 580SN Backhoe Loader MikePhua 0 4 10 hours ago
Last Post: MikePhua
  Troubleshooting Noise in 4th Gear on a Case 580B MikePhua 0 5 10 hours ago
Last Post: MikePhua
  Troubleshooting Shifting Issues in the Case 580B: From Neutral to Gear MikePhua 0 4 11 hours ago
Last Post: MikePhua
  Diagnosing Fuel System Faults on the Kobelco SK200-8 with Common Rail Injection MikePhua 0 4 11 hours ago
Last Post: MikePhua
  Case 450 Starting Issues and Troubleshooting MikePhua 0 5 11 hours ago
Last Post: MikePhua
  Why Is the Cluster Sprocket Loose on a Case 1830 Uniloader MikePhua 0 3 11 hours ago
Last Post: MikePhua
  Troubleshooting Service Code Issues on the CAT D6RXL Dozer MikePhua 0 7 11 hours ago
Last Post: MikePhua
  Why the Volvo EC140BLC May Fail to Start and Display Error Code ER13 MikePhua 0 4 11 hours ago
Last Post: MikePhua
  Where Is the Block Heater Cord Located on a Case 75XT Skid Steer MikePhua 0 4 11 hours ago
Last Post: MikePhua
  Troubleshooting John Deere 544K Code 611-3 MikePhua 0 6 11 hours ago
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)