Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Choosing the Right Rear Axle Fluid for the Case 580 Super L
#1
The Case 580SL and Its Legacy
The Case 580 Super L (580SL) backhoe loader was introduced in the early 1990s by J.I. Case Company, a brand with roots dating back to 1842. Known for its rugged design and versatility, the 580SL quickly became a staple in municipal fleets, utility contractors, and farm operations. It featured a turbocharged diesel engine, four-wheel drive options, and improved hydraulic performance over its predecessors. By the mid-1990s, Case had sold tens of thousands of units globally, with strong adoption in North America and parts of Europe.
The 580SL was part of the broader Super series, which included the 580K, 580SK, and later the 580M. Each iteration brought refinements in operator comfort, hydraulic control, and drivetrain durability. The Super L, in particular, was praised for its wet disc brakes and planetary rear axle—features that required careful attention to fluid compatibility.
Terminology Clarification
- Rear Axle: The assembly that transmits power from the transmission to the rear wheels
- Planetaries: Gear systems inside the wheel hubs that multiply torque and reduce strain on the driveline
- Wet Disc Brakes: Brakes submerged in oil for cooling and longevity
- MS1317 Fluid: A Case-specified gear oil designed for early planetary axles and wet brakes
- Hy-Tran Ultra: A multi-purpose hydraulic and transmission fluid developed by Case IH for modern equipment
Fluid Compatibility and Serial Number Nuances
Early 580SL units—particularly those with rear axle serial numbers ending in “A3”—were originally specified to use MS1317 fluid. This oil was formulated to support the brake disc material and planetary gear tolerances of that era. However, in 1996, Case issued a technical bulletin (NLB MP 006 96) announcing a brake disc material update. Machines that received the updated brake components were re-stamped with an “A4” suffix on the axle plate, indicating compatibility with newer fluids like MS1207 or MS1209—both variants of Hy-Tran Plus and Ultra.
This distinction is critical. Using Hy-Tran Ultra in an unmodified A3 axle can lead to premature brake wear, low-speed chatter, or even brake failure. Unfortunately, many operators are unaware of the stamping update or the implications of fluid substitution.
Real-World Challenges and Dealer Discontinuation
One operator, servicing his 580SL at the 6000-hour mark, discovered that MS1317 was no longer stocked by his local dealer. The dealer recommended Hy-Tran Ultra as a universal replacement, citing its broader compatibility. However, without confirmation of the axle update, this advice posed a risk.
Another technician from Maryland suggested contacting oil distributors like Chevron or Mobil to source equivalent fluids. These companies often provide spec sheets and can match legacy formulations with modern equivalents. Still, the key is ensuring the fluid meets the original MS1317 additive profile—especially for wet brake systems.
Recommendations for Fluid Selection
To avoid costly mistakes, operators should:
  • Check the rear axle serial number for an “A4” stamp
  • If unstamped, assume original brake discs and use MS1317 or equivalent
  • Contact Case dealers for bulletin NLB MP 006 96 to verify compatibility
  • Consult oil manufacturers for spec-matched alternatives if MS1317 is unavailable
  • Consider installing updated brake components if switching to Hy-Tran Ultra
Wet Brake Additives and Performance Enhancements
Even with correct fluid, wet brakes can exhibit low-speed chatter—a vibration or noise during slow movement. Case offers a wet brake oil additive designed to reduce this issue. It’s especially useful in older machines or those operating in cold climates where fluid viscosity affects brake response.
One retired Case technician from Pennsylvania recalled servicing dozens of early 580SLs during the recall period. His shop switched entirely to Hy-Tran Plus after updating the brake systems, and he never encountered fluid-related failures afterward. He emphasized the importance of using the additive in borderline cases or during seasonal transitions.
Torque Converter and Transmission Considerations
While the rear axle fluid is critical, the 580SL also requires attention to its transmission and torque converter. These components typically use the same Hy-Tran Ultra fluid, simplifying inventory and maintenance. However, contamination—such as debris from a failing front pump—can compromise the entire hydraulic circuit. Regular fluid changes and filter inspections are essential, especially on machines approaching 6000 hours.
Conclusion
The Case 580SL remains a workhorse decades after its release, but its longevity depends on informed maintenance. Fluid compatibility is not just a matter of brand—it’s a matter of brake material, axle design, and serial number history. Operators should treat fluid selection as a technical decision, not a convenience. With proper verification and attention to detail, the 580SL can continue delivering reliable performance in fields, trenches, and job sites for years to come.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Replacing Rear Brakes on the Case 580 Super M Backhoe MikePhua 0 1 2 minutes ago
Last Post: MikePhua
  Removing the Rear Pin on a Fiat-Allis 7G-B Bucket Lift Cylinder MikePhua 0 3 27 minutes ago
Last Post: MikePhua
  Decoding Fault Codes and Diagnostics on Case CX Series Excavators MikePhua 0 5 34 minutes ago
Last Post: MikePhua
  Case 450 Dozer Brake Troubleshooting and Restoration MikePhua 0 8 1 hour ago
Last Post: MikePhua
  Troubleshooting and Problem Solving in Heavy Equipment: A Case Study Approach MikePhua 0 9 1 hour ago
Last Post: MikePhua
  Case SR250 Dash Fault Code: Troubleshooting and Solutions MikePhua 0 9 1 hour ago
Last Post: MikePhua
  Volvo L60E Fluid Requirements and Maintenance Strategy MikePhua 0 10 1 hour ago
Last Post: MikePhua
  Frozen Rear Axle on a Case 580CK Backhoe and How to Recover It MikePhua 0 11 3 hours ago
Last Post: MikePhua
  Repairing the Hydraulic Pump Shaft on a Case 580B Backhoe MikePhua 0 13 3 hours ago
Last Post: MikePhua
  Removing the Hydraulic Pump on a Case 580B Backhoe Loader MikePhua 0 13 3 hours ago
Last Post: MikePhua
  Troubleshooting Steering Problems in the Case 480D Loader MikePhua 0 6 4 hours ago
Last Post: MikePhua
  Water Contamination in Engine Oil on the Case 850B Dozer MikePhua 0 7 4 hours ago
Last Post: MikePhua
  Case CX130B Running Rough and Shutting Down: Troubleshooting and Solutions MikePhua 0 9 4 hours ago
Last Post: MikePhua
  Case 580 Series 3 Backhoe Loader Transmission Troubleshooting and Restoration MikePhua 0 9 5 hours ago
Last Post: MikePhua
  Diagnosing a Maxle That Won’t Lower on a 2023 Mack Super Dump MikePhua 0 8 5 hours ago
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)