Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bobcat 843 Idle Surge Troubleshooting
#1
Introduction
The Bobcat 843, a compact skid-steer loader produced between 1987 and 1991, is renowned for its versatility and durability. Equipped with either an Isuzu or Perkins engine, it remains a popular choice for various applications. However, some operators have reported idle surge issues, where the engine's RPM fluctuates unexpectedly. This article delves into potential causes and solutions for this problem, drawing insights from user experiences and technical analyses.
Understanding the Idle Surge Phenomenon
Idle surge refers to the oscillation of engine RPMs, where the engine revs up and down without input from the throttle. In the case of the Bobcat 843, operators have observed RPM fluctuations ranging from 15 to 45-second cycles, with the engine occasionally returning to idle without throttle adjustment.
Potential Causes of Idle Surge
  1. Fuel Delivery Issues
    • Air Leaks in Fuel System: Air entering the fuel lines can disrupt fuel delivery, leading to inconsistent engine performance.
    • Clogged Fuel Filters: Even if the fuel filter bowl appears full, a clogged filter can restrict fuel flow, causing idle instability.
    • Faulty Fuel Injection Pump: A malfunctioning mechanical fuel injection pump may fail to maintain consistent fuel pressure, resulting in erratic idling.
  2. Electrical System Malfunctions
    • Defective Throttle Position Sensor (TPS): The TPS monitors throttle position and communicates with the engine control unit. A faulty TPS can send incorrect signals, leading to idle fluctuations.
    • Worn Wiring or Connectors: Corroded or loose electrical connections can cause intermittent signals, affecting engine performance.
  3. Air Intake Problems
    • Dirty Air Filters: Clogged air filters can restrict airflow, causing the engine to run rich (excess fuel) or lean (insufficient fuel), both of which can lead to idle instability.
    • Obstructed Intake Manifold: Debris or carbon buildup in the intake manifold can disrupt air-fuel mixture, affecting idle quality.
  4. Engine Control Unit (ECU) Issues
    • Software Glitches: Occasionally, ECU software may have bugs that cause erratic engine behavior.
    • Sensor Calibration Errors: Incorrect calibration of sensors can lead to improper fuel-air mixture adjustments, resulting in idle surges.
Diagnostic Steps
  1. Visual Inspection
    • Check for visible signs of fuel leaks or air bubbles in the fuel lines.
    • Inspect electrical connectors for corrosion or loose connections.
    • Examine air filters and intake components for dirt or obstructions.
  2. Fuel System Testing
    • Use a fuel pressure gauge to check for consistent fuel pressure.
    • Test the primer bulb for proper operation and fuel delivery.
    • Bleed the fuel system to remove any trapped air.
  3. Electrical System Testing
    • Test the throttle position sensor for correct voltage output.
    • Use a multimeter to check for continuity in wiring and connectors.
  4. Air Intake Testing
    • Measure airflow to ensure it's within manufacturer specifications.
    • Check for vacuum leaks in the intake manifold.
Preventive Maintenance Tips
  • Regular Fuel System Maintenance: Replace fuel filters at recommended intervals and inspect fuel lines for wear.
  • Electrical System Care: Clean and tighten electrical connections regularly to prevent signal issues.
  • Air Intake System Upkeep: Replace air filters as needed and ensure the intake system is free from obstructions.
  • Routine ECU Diagnostics: Periodically update ECU software and recalibrate sensors to maintain optimal engine performance.
Conclusion
Idle surge in the Bobcat 843 can stem from various sources, including fuel delivery problems, electrical system malfunctions, air intake issues, and ECU glitches. By systematically diagnosing these areas and adhering to preventive maintenance practices, operators can restore stable engine idling and prolong the lifespan of their equipment.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  John Deere 21GLC Excavator Charging System Troubleshooting MikePhua 0 6 10-05-2025, 07:00 PM
Last Post: MikePhua
  Skyjack 3220 Total Power Loss Troubleshooting and Electrical Recovery MikePhua 0 8 10-05-2025, 07:00 PM
Last Post: MikePhua
  Komatsu WB97R-2 Anti-Theft System: Understanding and Troubleshooting MikePhua 0 7 10-05-2025, 06:51 PM
Last Post: MikePhua
  Willmar Wrangler 4550 Loader Troubleshooting and Mechanical Insights MikePhua 0 5 10-05-2025, 06:50 PM
Last Post: MikePhua
  Komatsu WB97R-2 Anti-Theft System: Understanding and Troubleshooting MikePhua 0 5 10-05-2025, 06:46 PM
Last Post: MikePhua
  Clark 28000 Transmission Clutch Behavior and Troubleshooting MikePhua 0 7 10-05-2025, 05:14 PM
Last Post: MikePhua
  Troubleshooting Swing Issues in Komatsu PC35MR-2 Excavators MikePhua 0 7 10-05-2025, 05:02 PM
Last Post: MikePhua
  John Deere 35D Joystick Thumb Rocker Failure and Electrical Troubleshooting MikePhua 0 8 10-05-2025, 05:00 PM
Last Post: MikePhua
  Hitachi ZX85US Idle Speed Controller Issues MikePhua 0 8 10-05-2025, 04:22 PM
Last Post: MikePhua
  Auxiliary Hydraulics Setup and Troubleshooting in Compact Equipment MikePhua 0 7 10-05-2025, 04:16 PM
Last Post: MikePhua
  Bobcat S130 Charging System Diagnosis and Repair MikePhua 0 6 10-05-2025, 04:15 PM
Last Post: MikePhua
  John Deere 690C Excavator Power Loss Troubleshooting MikePhua 0 4 10-05-2025, 04:12 PM
Last Post: MikePhua
  Dynahoe Transmission Troubleshooting and Restoration MikePhua 0 4 10-05-2025, 04:11 PM
Last Post: MikePhua
  Troubleshooting D6C Pops Out of Neutral: Common Causes and Solutions MikePhua 0 13 10-04-2025, 02:59 PM
Last Post: MikePhua
  Case 580CK Block Heater: Importance and Troubleshooting MikePhua 0 11 10-04-2025, 02:57 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: