Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Case 580 Super L Hot Start and Low Voltage Issues
#1
Problem Description
The Case 580 Super L experiences difficulties starting when the engine and machine are hot. Additionally, there is a persistent low voltage condition during cranking, which contributes to the hard start problem.
Common Causes
  • Weak or Failing Battery: A battery that is older or partially discharged often struggles to provide sufficient current, especially under hot conditions.
  • Poor Electrical Connections: Corroded or loose battery terminals, ground straps, and wiring can cause voltage drops and insufficient power to the starter.
  • Starter Motor Issues: A worn or overheating starter motor may have reduced performance, worsening when hot.
  • Voltage Drop in Cables: Long or thin cables with internal corrosion can cause significant voltage drop under load.
  • Charging System Problems: A failing alternator or voltage regulator can result in a battery that is not properly charged, exacerbating low voltage.
Troubleshooting and Recommendations
  • Battery Check: Test battery voltage and load capacity; replace if below specifications.
  • Clean and Tighten Connections: Ensure battery terminals, cable ends, and ground connections are clean, tight, and corrosion-free.
  • Inspect Starter and Cables: Check starter motor condition and measure voltage drop across cables during cranking.
  • Charging System Test: Verify alternator output and regulator function to ensure the battery charges properly.
  • Heat-Related Considerations: Heat can affect electrical components; allow the machine to cool if possible and check if the problem persists.
User Experiences
  • Several users noted that replacing the battery and cleaning terminals resolved low voltage problems.
  • Some found that upgrading cables or adding heavier gauge wiring improved voltage delivery.
  • In a few cases, starter motor replacement was necessary due to internal wear.
  • Regular maintenance of the electrical system is emphasized to prevent similar issues.
Conclusion
Hot start and low voltage problems in the Case 580 Super L are often linked to battery condition and electrical connections. Systematic checking and maintenance of the battery, cables, starter, and charging system can restore reliable starting performance, even in hot conditions.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Troubleshooting Hydraulic Issues in the Kobelco SK160LC-6E: A Practical Guide MikePhua 0 15 4 hours ago
Last Post: MikePhua
  Troubleshooting Hydraulic Pressure Loss in the Case 580K: A Practical Guide MikePhua 0 14 4 hours ago
Last Post: MikePhua
  Common Issues and Maintenance Tips for the CAT 320L Excavator MikePhua 0 14 4 hours ago
Last Post: MikePhua
  Diagnosing and Fixing a Weak Backhoe on the Case 590SN MikePhua 0 5 4 hours ago
Last Post: MikePhua
  Troubleshooting and Wiring Challenges on the Case 580B CK: A Comprehensive Guide MikePhua 0 3 4 hours ago
Last Post: MikePhua
  Understanding and Maintaining the Transmission Fluid Level in the Case 850B MikePhua 0 3 4 hours ago
Last Post: MikePhua
  Troubleshooting Hour Meter Issues in Heavy Equipment MikePhua 0 15 6 hours ago
Last Post: MikePhua
  Maintaining and Repairing the John Deere JD410: Key Insights and Common Issues MikePhua 0 17 6 hours ago
Last Post: MikePhua
  Troubleshooting the Case CX36B: Slew Ring Bearing vs. Slew Motor Issues MikePhua 0 9 6 hours ago
Last Post: MikePhua
  Diagnosing and Resolving 2-Wheel Drive Issues on the Case 580L MikePhua 0 10 7 hours ago
Last Post: MikePhua
  Transmission Troubles in the 1990 Dresser 510C: Common Issues and Solutions MikePhua 0 10 7 hours ago
Last Post: MikePhua
  Troubleshooting Heating Issues on a Kobelco SK-120 Excavator MikePhua 0 21 7 hours ago
Last Post: MikePhua
  Hydraulic Line Size and Maintenance for the Case 450 Tractor MikePhua 0 22 7 hours ago
Last Post: MikePhua
  Troubleshooting Hydraulic Flow Issues in the 2014 CAT 262D Skid Steer MikePhua 0 14 7 hours ago
Last Post: MikePhua
  Understanding the Wiring Diagram for the Case 575D: A Comprehensive Guide MikePhua 0 12 7 hours ago
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)