Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Case 580 Super L Hot Start and Low Voltage Issues
#1
Problem Description
The Case 580 Super L experiences difficulties starting when the engine and machine are hot. Additionally, there is a persistent low voltage condition during cranking, which contributes to the hard start problem.
Common Causes
  • Weak or Failing Battery: A battery that is older or partially discharged often struggles to provide sufficient current, especially under hot conditions.
  • Poor Electrical Connections: Corroded or loose battery terminals, ground straps, and wiring can cause voltage drops and insufficient power to the starter.
  • Starter Motor Issues: A worn or overheating starter motor may have reduced performance, worsening when hot.
  • Voltage Drop in Cables: Long or thin cables with internal corrosion can cause significant voltage drop under load.
  • Charging System Problems: A failing alternator or voltage regulator can result in a battery that is not properly charged, exacerbating low voltage.
Troubleshooting and Recommendations
  • Battery Check: Test battery voltage and load capacity; replace if below specifications.
  • Clean and Tighten Connections: Ensure battery terminals, cable ends, and ground connections are clean, tight, and corrosion-free.
  • Inspect Starter and Cables: Check starter motor condition and measure voltage drop across cables during cranking.
  • Charging System Test: Verify alternator output and regulator function to ensure the battery charges properly.
  • Heat-Related Considerations: Heat can affect electrical components; allow the machine to cool if possible and check if the problem persists.
User Experiences
  • Several users noted that replacing the battery and cleaning terminals resolved low voltage problems.
  • Some found that upgrading cables or adding heavier gauge wiring improved voltage delivery.
  • In a few cases, starter motor replacement was necessary due to internal wear.
  • Regular maintenance of the electrical system is emphasized to prevent similar issues.
Conclusion
Hot start and low voltage problems in the Case 580 Super L are often linked to battery condition and electrical connections. Systematic checking and maintenance of the battery, cables, starter, and charging system can restore reliable starting performance, even in hot conditions.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Exploring the Case 850E Crawler Dozer MikePhua 0 12 Yesterday, 03:11 PM
Last Post: MikePhua
  Wheel Bearing Preload Torque for Case 1840 Skid Steer MikePhua 0 13 Yesterday, 03:01 PM
Last Post: MikePhua
  Case Construction Equipment Overview MikePhua 0 13 Yesterday, 02:35 PM
Last Post: MikePhua
  1968 Case 680CK: A Closer Look at the Classic Loader MikePhua 0 11 Yesterday, 02:03 PM
Last Post: MikePhua
  Can You Upgrade the Coupler on a Case 1845C Skid Steer MikePhua 0 10 Yesterday, 02:03 PM
Last Post: MikePhua
  Is the Case 1450B Dozer Still a Practical Machine Today MikePhua 0 10 Yesterday, 01:57 PM
Last Post: MikePhua
  Is a Case 1845C Skid Steer with Drive and Lift Issues Still Worth Buying MikePhua 0 10 Yesterday, 01:50 PM
Last Post: MikePhua
  Evaluating a Used Case 580B Backhoe Loader MikePhua 0 12 10-18-2025, 08:00 PM
Last Post: MikePhua
  Case SV300 Skid Steer Delivers Power and Precision in Excavation Work MikePhua 0 10 10-18-2025, 05:45 PM
Last Post: MikePhua
  Case 580G 4x4: A Reliable and Durable Backhoe Loader MikePhua 0 9 10-18-2025, 05:22 PM
Last Post: MikePhua
  Which Skid Steer Is Better for Long-Term Use Fermec 526 or Case 1845 MikePhua 0 6 10-18-2025, 02:41 PM
Last Post: MikePhua
  Is the Komatsu WB97R a Good Alternative to Case and Cat Backhoes MikePhua 0 10 10-18-2025, 02:30 PM
Last Post: MikePhua
  The Case 580 Super L: A Comprehensive Overview MikePhua 0 8 10-17-2025, 05:09 PM
Last Post: MikePhua
  Why Are the Controls on My Case 580 Backhoe So Sensitive MikePhua 0 15 10-17-2025, 03:10 PM
Last Post: MikePhua
  Bobcat Tracks – Design, Issues, and Best Practices MikePhua 0 12 10-16-2025, 11:46 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)