Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CAT 279C Gremlin Issues: Troubleshooting and Solutions
#1
On panswork, users have shared their experiences with some "gremlin" issues in their CAT 279C skid steer loaders. These problems include unexpected behavior, such as electrical faults, hydraulic system malfunctions, and other irregularities. While these issues may not be immediately catastrophic, they do affect the machine's overall performance.
Common Issues and Symptoms
  1. Electrical System Failures
    One of the most common issues reported is electrical system failure. Users have experienced delayed starts or complete power loss during operation, which can make the machine difficult to control. Electrical faults can stem from wiring issues, faulty sensors, or a weak battery.
  2. Hydraulic System Issues
    Hydraulic system problems are also frequently mentioned. Some users notice slow or unresponsive hydraulic movements, which affects the machine's lifting capacity or load handling. In some cases, the hydraulics may fail to respond entirely, which reduces the machine’s overall functionality.
  3. Control System Anomalies
    Occasionally, the control system may behave erratically, causing the machine to lose power or fail to execute tasks as expected. This can happen during operation, causing a noticeable dip in performance and affecting the operator’s ability to complete tasks efficiently.
Troubleshooting and Recommendations
  1. Inspect Electrical Connections and Battery
    Electrical faults are a common cause of "gremlin" issues. Start by inspecting all electrical connections, particularly the ground connections and battery terminals. A weak or poorly connected battery, as well as loose or corroded wiring, can cause the machine to fail to start or lose power during use.
  2. Check Hydraulic System
    A thorough inspection of the hydraulic system is crucial. Ensure that the hydraulic oil is at the proper level and in good condition, and check for leaks in the system. Additionally, inspect the hydraulic pumps and valves for potential wear or damage. Hydraulic issues can significantly impact the performance of the machine if not addressed.
  3. Recalibrate the Control System
    If there are issues with the machine's control system, it may be necessary to recalibrate the controllers and sensors. In some cases, the system may require software updates or adjustments to restore proper functionality.
  4. Check for Fault Codes
    Use a diagnostic tool to scan for fault codes that may be present in the machine’s system. Fault codes can often pinpoint the specific cause of the issue, whether it relates to electrical, hydraulic, or control systems, allowing for faster and more accurate repairs.
Conclusion
The "gremlin" issues with the CAT 279C skid steer loader can typically be traced back to electrical, hydraulic, or control system faults. Regular maintenance and proactive inspections of these systems are essential to avoid these annoying problems. By following a systematic approach to troubleshooting and addressing issues early, the machine can maintain optimal performance and reliability.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ASV VT-70: A Detailed Overview and Troubleshooting Guide MikePhua 0 7 4 hours ago
Last Post: MikePhua
  CAT 140M Service Advisory: Key Issues and Solutions MikePhua 0 6 4 hours ago
Last Post: MikePhua
  Glow Plug Control Issues on the CAT 301.7D CR Excavator MikePhua 0 11 6 hours ago
Last Post: MikePhua
  Ford 555B Backhoe: Overview, Issues, and Maintenance Insights MikePhua 0 8 6 hours ago
Last Post: MikePhua
  Understanding the Case 70 XT Skid Steer: Features, Maintenance, and Common Issues MikePhua 0 6 6 hours ago
Last Post: MikePhua
  Komatsu 700H Dozer: An Overview of Performance, Issues, and Maintenance MikePhua 0 6 7 hours ago
Last Post: MikePhua
  Volvo PF6110 Tracked Paver: Performance, Maintenance, and Troubleshooting MikePhua 0 12 10-19-2025, 03:19 PM
Last Post: MikePhua
  Is a Case 1845C Skid Steer with Drive and Lift Issues Still Worth Buying MikePhua 0 11 10-19-2025, 01:50 PM
Last Post: MikePhua
  Galion 503 Grader: Features, Maintenance, and Troubleshooting MikePhua 0 11 10-18-2025, 08:15 PM
Last Post: MikePhua
  John Deere 120G Brakes: Troubleshooting and Maintenance MikePhua 0 14 10-17-2025, 01:49 AM
Last Post: MikePhua
  Bobcat Tracks – Design, Issues, and Best Practices MikePhua 0 18 10-16-2025, 11:46 PM
Last Post: MikePhua
  D6R Grid Heater: Function, Troubleshooting, and Maintenance MikePhua 0 21 10-16-2025, 09:05 PM
Last Post: MikePhua
  Cat 301.5 Mini Excavator: Overview, Features, and Common Issues MikePhua 0 23 10-15-2025, 12:15 PM
Last Post: MikePhua
  CAT D3B Dozer: Overview, Maintenance, and Troubleshooting MikePhua 0 21 10-14-2025, 02:41 PM
Last Post: MikePhua
  1968 Case 580 CK: S Position and Transmission Issues MikePhua 0 16 10-14-2025, 02:36 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)