Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CAT 279C2 Left Track Motor Hydraulic Hose Blowout Issue
#1
A user shared a problem on Panswork regarding their CAT 279C2 machine, where the hydraulic hose connected to the left track motor suddenly blew out, causing hydraulic fluid leakage. This issue not only disrupted the machine’s normal operation but also presented challenges in terms of repair and safety.
Problem Analysis:
According to the user's information, the hydraulic hose that blew out is connected to the left track motor. This likely happened due to the hose being exposed to high pressure during operation, or possibly due to wear and tear, aging, or overloading. In hydraulic systems, particularly hoses connected to motors, the pressure can be extremely high, making the hose prone to failure if it’s not durable enough or if there’s an underlying defect.
Possible Causes:
  1. Aging or Wear of Hydraulic Hoses:
    Over time, hydraulic hoses can degrade or wear out due to frequent bending, friction, or exposure to extreme environmental conditions. This leads to an increased risk of failure or rupture, especially in high-pressure areas like motor connections.
  2. Overloading:
    If the machine operates under heavy load or in demanding conditions, the hydraulic system may face abnormal pressure, increasing the likelihood of a hose failure. Particularly during high-intensity tasks such as pushing or towing, the excess load can cause the hose to rupture.
  3. Improper Installation or Maintenance:
    In some cases, if the hydraulic hose wasn’t installed correctly or wasn’t properly maintained, it could become loose or poorly secured, leading to a higher risk of failure. This can occur during installation or repair work, where steps may not have been followed to ensure the hose was properly fixed.
Solutions:
  1. Replace the Damaged Hydraulic Hose:
    The user should first shut down the machine and ensure the hydraulic system is depressurized. Afterward, the damaged hose should be removed and replaced with a new one that meets the machine’s specifications. The new hose should be of high quality, durable, and installed securely to prevent future issues.
  2. Check the Entire Hydraulic System:
    After replacing the damaged hose, it’s essential to inspect the entire hydraulic system, including the pump, motor, filters, and other components, to ensure there are no other leaks or damage. Regular inspection of the hydraulic system can help detect potential issues before they lead to failure.
  3. Regular Maintenance and Inspections:
    To prevent further hydraulic hose failures, the user should implement a routine maintenance schedule for the equipment. This should include checking for signs of aging, wear, or damage in the hoses. Timely replacement of old or worn parts can prevent small issues from developing into more significant problems.
Conclusion:
Hydraulic hose failures, such as the one experienced on the CAT 279C2, are common in high-load or long-duration usage scenarios. By replacing damaged hoses, thoroughly inspecting the hydraulic system, and conducting regular maintenance, users can effectively prevent such issues and ensure the machine operates smoothly. Addressing these problems promptly and performing thorough checks will not only restore the equipment’s functionality but also extend its overall lifespan.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Should You Buy a New or Used Track Loader for Residential and Utility Work MikePhua 0 8 3 hours ago
Last Post: MikePhua
  Why Is My Bobcat T180 Losing Hydraulic Fluid Without Visible Leaks MikePhua 0 4 3 hours ago
Last Post: MikePhua
  Can You Merge Both Hydraulic Pumps on a CAT 320C for High-Flow Attachments MikePhua 0 4 3 hours ago
Last Post: MikePhua
  Hydraulic Oil Refill: Best Practices and Common Issues MikePhua 0 6 5 hours ago
Last Post: MikePhua
  Was This Custom CAT 939C Track Loader Built for Lettuce Harvesting MikePhua 0 8 5 hours ago
Last Post: MikePhua
  T86 vs 333G: A Comparison of Two Popular Compact Track Loaders MikePhua 0 7 5 hours ago
Last Post: MikePhua
  Where Are Motor Scrapers Still in Use MikePhua 0 6 6 hours ago
Last Post: MikePhua
  2005 Deere 755C Series 2 Dozer Steering Control Issue MikePhua 0 10 7 hours ago
Last Post: MikePhua
  EP287C: Understanding the Caterpillar Compact Track Loader MikePhua 0 11 7 hours ago
Last Post: MikePhua
  Building Fire Breaks with Compact Track Loaders (CTL) MikePhua 0 11 Yesterday, 07:00 PM
Last Post: MikePhua
  Buying a 100-Ton C-Frame Track Press for Undercarriage Work MikePhua 0 6 Yesterday, 06:16 PM
Last Post: MikePhua
  Identifying a Wabco Motor Grader with Cummins 160 Engine MikePhua 0 7 Yesterday, 06:13 PM
Last Post: MikePhua
  Track or Wheel Loader for Farm Use MikePhua 0 10 Yesterday, 04:58 PM
Last Post: MikePhua
  Evaluating the 2008 Case 445CT Compact Track Loader MikePhua 0 6 Yesterday, 04:25 PM
Last Post: MikePhua
  Hydraulic Oil Selection and System Cleaning for the Caterpillar 955L Track Loader MikePhua 0 10 Yesterday, 03:32 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)