Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Demolishing a BAe 146 Airliner with Heavy Equipment
#1
A Rare Sight in Aviation and Demolition
It’s not every day that you witness a short-haul passenger jet being dismantled by a track loader. The aircraft in question was a BAe 146, a British-built regional jet known for its quiet operation and short takeoff capabilities. Originally developed by British Aerospace in the early 1980s, the BAe 146 was widely used across Europe, Australia, and New Zealand, with over 390 units produced. Its high-wing design and four-engine configuration made it ideal for airports with noise restrictions and short runways.
In this unusual scene, the aircraft—registered in New Zealand—was being torn apart by a Caterpillar 977 track loader, a machine more commonly seen on construction sites than airfields. The juxtaposition of aviation and demolition machinery created a surreal moment, highlighting the end-of-life process for aging aircraft.
The BAe 146 and Its Operational History
The BAe 146 was designed for efficiency and versatility. It featured:
  • Four turbofan engines mounted on pylons beneath the wings
  • A T-tail configuration for improved control during low-speed operations
  • Seating capacity ranging from 70 to 112 passengers
  • A pressurized cabin and quiet operation, earning it the nickname “Whisper Jet”
Despite its strengths, the BAe 146 was eventually phased out due to rising maintenance costs and fuel inefficiency compared to newer twin-engine jets. Many units were sold to secondary markets or converted for cargo use, but some met their end in scrapyards or training exercises.
Demolition Equipment and Technique
The Caterpillar 977 used in the dismantling is a track loader equipped with a multi-purpose bucket and high breakout force. While not designed for precision cutting, its brute strength is sufficient to flatten fuselage sections, crush wings, and tear through aluminum skin. In more advanced aircraft demolition, hydraulic shears or high-reach excavators are preferred, but in this case, the 977 was enough to reduce the jet to scrap.
Key specs of the Cat 977 include:
  • Operating weight: ~50,000 lbs
  • Engine power: ~200 HP
  • Bucket capacity: ~2.5 cubic yards
  • Track-mounted for stability on uneven terrain
Military Aircraft and Nicknames
The discussion around the BAe 146 demolition sparked memories of other aircraft, including the F-111 “Aardvark,” affectionately known as the “Pig” in Australian service. The F-111 was famous for its terrain-following radar and long-range strike capability. Pilots often described flying with the radar set to “hard” mode as a bruising experience, due to the aggressive altitude changes required to follow ground contours.
The nickname “Pig” came from its ability to fly low with its “nose in the weeds,” a term used to describe stealthy, low-altitude flight. Despite its retirement, the F-111 remains one of the most respected strike aircraft in military aviation history.
Aircraft Demolition in Media and Training
Aircraft demolition has also appeared in popular media. For example, in the production of the TV series “Lost,” a Hitachi EX200 excavator equipped with a hydraulic shear was used to dismantle a jet for the crash scene. This type of equipment allows for precise cuts and controlled destruction, essential for film sets and training exercises.
In military and emergency response training, aircraft demolition is used to simulate crash recovery, firefighting, and extraction scenarios. These exercises help prepare crews for real-world incidents involving commercial or military aircraft.
Conclusion
The demolition of a BAe 146 by a Caterpillar 977 is a rare and visually striking event that bridges the worlds of aviation and heavy equipment. It serves as a reminder of the lifecycle of machines—whether they fly through the skies or crawl across the earth. From the quiet hum of the Whisper Jet to the roar of a diesel track loader, this scene captures the end of one era and the enduring utility of another.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Old Pictures of Heavy Equipment MikePhua 0 45 12-01-2025, 01:34 PM
Last Post: MikePhua
  Struggling With Sourcing Equipment MikePhua 0 53 11-28-2025, 02:12 PM
Last Post: MikePhua
  How Long Can Equipment Manufacturers Hang On MikePhua 0 59 11-28-2025, 01:21 PM
Last Post: MikePhua
  Caterpillar Technical Manuals Remain Indispensable for Equipment Owners and Mechanics MikePhua 0 68 11-19-2025, 05:05 PM
Last Post: MikePhua
  Hydraulic Pressure Testing for Heavy Equipment MikePhua 0 74 11-19-2025, 04:56 PM
Last Post: MikePhua
  Hough 65C Loader Sensor Configuration Reflects Transitional Design in Mid-1980s Heavy Equipment MikePhua 0 81 11-17-2025, 07:07 PM
Last Post: MikePhua
  Mahogany in Heavy Equipment and Construction Applications MikePhua 0 68 11-17-2025, 06:31 PM
Last Post: MikePhua
  Managing Burn Piles With Heavy Equipment MikePhua 0 83 11-16-2025, 07:02 PM
Last Post: MikePhua
  Starting A New Career In Heavy Equipment Operation MikePhua 0 70 11-16-2025, 06:59 PM
Last Post: MikePhua
  Exploring Heavy Machinery at a School Open House MikePhua 0 77 11-16-2025, 03:30 PM
Last Post: MikePhua
  Choosing the Right 20-Ton Tag Trailer for Heavy Equipment Hauling MikePhua 0 83 11-16-2025, 02:42 PM
Last Post: MikePhua
  Product Support for Earthmoving Equipment MikePhua 0 74 11-16-2025, 02:36 PM
Last Post: MikePhua
  Sunday Work in Heavy Equipment Operations MikePhua 0 77 11-14-2025, 03:01 PM
Last Post: MikePhua
  Different Equipment MikePhua 0 63 11-14-2025, 02:09 PM
Last Post: MikePhua
  Fast vs Slow Speed in Construction Equipment: A Detailed Comparison MikePhua 0 68 11-13-2025, 11:23 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)