Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Troubleshooting New Holland L785 Skid Steer: No Go, No Start, No Fun
#1
The New Holland L785 skid steer loader is a versatile and powerful machine, commonly used in construction, landscaping, and agricultural applications. However, like all heavy equipment, it is not immune to mechanical issues. One of the most frustrating problems an operator can face is when the machine won’t start, moves intermittently, or fails to respond. A “no-go” or “no-start” issue can halt operations and require prompt troubleshooting to minimize downtime.
In this article, we’ll explore potential causes for a New Holland L785 that won’t start or respond, outline a step-by-step troubleshooting guide, and offer solutions to get the machine back up and running efficiently.
Understanding the New Holland L785 Skid Steer
Before diving into troubleshooting, it’s essential to understand the key components and systems in a New Holland L785 skid steer loader. This model is equipped with a reliable hydraulic system, a diesel engine, and a robust drive system designed to handle tough jobs. The L785 is powered by a 60-horsepower engine and typically uses a hydrostatic drive system to power the wheels or tracks.
The L785, like other skid steers, has several systems that work in tandem to keep it functioning smoothly:
  • Hydraulic system: Controls lifting arms and implements.
  • Fuel system: Provides fuel to the engine.
  • Electrical system: Powers the starter, control panel, and other electrical components.
  • Drive system: Powers the wheels or tracks for movement.
When the skid steer experiences issues, it is often due to one of these systems failing.
Potential Causes for a No-Go, No-Start Issue
When the L785 won’t start or move, several possible culprits could be to blame. Below are some of the most common causes for a New Holland L785 to fail to start, fail to move, or operate erratically.
1. Dead or Weak Battery
A weak or dead battery is one of the most common reasons a skid steer may fail to start. Over time, batteries lose their charge or fail entirely, especially in colder weather or if the machine isn’t used regularly.
  • Symptoms: The starter motor may not engage, or the engine turns over slowly.
  • Solution: Inspect the battery for any corrosion on the terminals. Test the voltage of the battery. If the battery is weak or dead, replace it. Be sure to check the charging system to ensure that it is properly charging the battery.
2. Faulty Starter Motor or Solenoid
If the battery is fine but the machine still won’t start, the issue could lie with the starter motor or solenoid. A faulty starter motor will prevent the engine from turning over.
  • Symptoms: No sound when turning the key or a clicking noise from the starter.
  • Solution: Inspect the starter motor and solenoid for wear or damage. If they are faulty, they will need to be replaced. Ensure all wiring connections are clean and tight.
3. Fuel System Problems
If the engine turns over but doesn’t start, there could be a fuel delivery problem. The fuel system may be clogged, or there may be an issue with the fuel pump, filters, or injectors.
  • Symptoms: Engine cranks but doesn’t start, or engine starts briefly and stalls.
  • Solution: Check the fuel tank for contamination, ensure that the fuel filter is not clogged, and verify that the fuel pump is working. If the fuel injectors are clogged, they may need to be cleaned or replaced.
4. Hydraulic System Failure
The L785 is powered by a hydrostatic drive system, which relies on hydraulic fluid to move the skid steer. If the hydraulic system fails, the machine may not move, or it may struggle to respond to operator inputs.
  • Symptoms: The engine runs, but the machine won’t move or responds sluggishly.
  • Solution: Check the hydraulic fluid level and condition. Low or contaminated hydraulic fluid can cause erratic movement or no movement at all. If the fluid is dirty, perform a hydraulic fluid flush and replace the filter. Also, inspect hydraulic hoses, cylinders, and the hydrostatic pump for leaks or damage.
5. Electrical System or Fuses
A blown fuse or damaged electrical wiring can cause a variety of problems, including a failure to start, failure to move, or malfunctioning of controls.
  • Symptoms: Intermittent electrical issues or no response from control systems.
  • Solution: Inspect the fuses and wiring for any signs of damage or corrosion. Replace any blown fuses or damaged wires. Ensure all electrical connections are clean and tight.
6. Safety Switches or Interlocks
Skid steers, including the New Holland L785, often have safety interlocks and switches that prevent the machine from operating if certain conditions aren’t met. These switches are designed to ensure operator safety, but if they malfunction, they can prevent the machine from starting or moving.
  • Symptoms: The machine won’t start or responds unpredictably.
  • Solution: Check all safety interlocks, such as the seat switch, lift arm switch, and parking brake switch. Ensure they are functioning correctly and that none of them are stuck or malfunctioning. Some machines may require a specific sequence of operations to engage the drive system.
7. Clutch or Transmission Problems
Another possible cause of a no-move condition is a problem with the clutch or transmission, especially if the skid steer is equipped with a manual drive system or mechanical transmission.
  • Symptoms: The engine runs, but the machine does not move.
  • Solution: Inspect the clutch and transmission system for signs of wear or failure. Ensure the drive belt is in good condition and properly tensioned. If the clutch is slipping or the transmission is damaged, repairs or replacement may be required.
Step-by-Step Troubleshooting Process
When troubleshooting a New Holland L785 that won’t start or move, follow these steps to narrow down the problem:
  1. Check the Battery: Inspect the battery for corrosion and test its voltage. If the battery is weak or dead, replace it and verify the charging system is functioning correctly.
  2. Inspect the Starter Motor: If the battery is fine but the machine still won’t start, check the starter motor and solenoid for any issues. If they are faulty, replace them.
  3. Check the Fuel System: If the engine cranks but doesn’t start, check the fuel filter, fuel pump, and injectors for blockages. Ensure the fuel tank is clean and the fuel is fresh.
  4. Examine the Hydraulic System: If the machine won’t move, check the hydraulic fluid level and condition. Replace dirty fluid and filters, and inspect hoses and pumps for leaks.
  5. Test Electrical Components: Inspect the fuses, wiring, and electrical connections for any signs of damage. Replace blown fuses and repair damaged wiring.
  6. Check Safety Interlocks: Verify that all safety switches and interlocks are working correctly. Ensure that the machine is in the proper operating sequence and that the operator safety system is functional.
  7. Inspect the Clutch/Transmission: If the machine still won’t move, check the clutch and transmission system for signs of failure.
Conclusion
A “no-go” or “no-start” issue with the New Holland L785 skid steer can be caused by a variety of factors, from simple electrical issues to more complex hydraulic or fuel system problems. By following the troubleshooting steps outlined above and addressing the root cause, operators can resolve these issues efficiently and get their skid steer back to work. Regular maintenance, including checking fluid levels, inspecting electrical systems, and testing components, can help prevent many common issues and keep your machine running smoothly.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Troubleshooting the Two-Speed Motor Issue on the MTL 25 Tak TL 150 MikePhua 0 5 38 minutes ago
Last Post: MikePhua
  Troubleshooting Outrigger Cylinder Retraction Issues on the 1982 Grove RT522 Crane MikePhua 0 4 38 minutes ago
Last Post: MikePhua
  Troubleshooting Noise in 4th Gear on a Case 580B MikePhua 0 5 39 minutes ago
Last Post: MikePhua
  Cat 257B3 Hydraulics and Cab Wiring Troubleshooting MikePhua 0 6 1 hour ago
Last Post: MikePhua
  Troubleshooting Shifting Issues in the Case 580B: From Neutral to Gear MikePhua 0 4 1 hour ago
Last Post: MikePhua
  John Deere 3200 Telescopic F-N-R Switch: Troubleshooting and Maintenance Insights MikePhua 0 3 1 hour ago
Last Post: MikePhua
  Case 450 Starting Issues and Troubleshooting MikePhua 0 3 1 hour ago
Last Post: MikePhua
  Troubleshooting Uneven Buckets on Skid Steers and Loaders MikePhua 0 6 1 hour ago
Last Post: MikePhua
  ChatGPT said: Troubleshooting Fuel Problems on the Gehl 4840 Skid Steer MikePhua 0 8 1 hour ago
Last Post: MikePhua
  Troubleshooting Service Code Issues on the CAT D6RXL Dozer MikePhua 0 7 1 hour ago
Last Post: MikePhua
  Troubleshooting Slow Starting in 12.7 Detroit Diesel Engines MikePhua 0 8 1 hour ago
Last Post: MikePhua
  Why the Volvo EC140BLC May Fail to Start and Display Error Code ER13 MikePhua 0 4 1 hour ago
Last Post: MikePhua
  Where Is the Block Heater Cord Located on a Case 75XT Skid Steer MikePhua 0 4 1 hour ago
Last Post: MikePhua
  Troubleshooting John Deere 544K Code 611-3 MikePhua 0 6 1 hour ago
Last Post: MikePhua
  Troubleshooting the Thumb on a CAT 314D MikePhua 0 2 1 hour ago
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)