Hydraulic Breaker Attachments and Service Support in Perth

[MikePhua]

Quick answer
Perth-based operators seeking hydraulic breaker attachment service can turn to Total Rockbreaking Solutions, BA Equipment Group, or Hydraulic Component Services. These companies offer repair, rebuild, installation, and commissioning for hammers, compactors, and related hydraulic tools.
Hydraulic breaker attachment overview
Hydraulic breakers—also known as hydraulic hammers—are percussion tools mounted to excavators, backhoes, or skid steers. They deliver high-impact blows to break rock, concrete, or asphalt. Common applications include:

• Quarrying and mining
  
• Demolition and trenching
  
• Road construction and foundation removal
  

Breakers use pressurized hydraulic oil to drive a piston against a chisel or blunt tool. Key components include:

• Accumulator: Stores hydraulic energy for consistent impact
  
• Piston and cylinder: Converts oil pressure into mechanical force
  
• Tool retainer: Holds the working tool in place
  
• Auto-lube system: Reduces wear on bushings and tool shank
  

Proper service and setup are critical to prevent premature failure and ensure peak performance.
Service providers in Perth
Several companies specialize in hydraulic breaker support across Western Australia:

• Total Rockbreaking Solutions
  Offers rebuilds, diagnostics, and tool selection guidance. Their Kewdale workshop handles all brands and includes setup for quick hitch piping and auto-lube systems.
  
• BA Equipment Group (BAEG)
  Supplies Epiroc, Erkat, and other premium brands. Provides sales, service, hire, and parts for breakers, drum cutters, and compactors. Offices in WA, VIC, and QLD.
  
• Hydraulic Component Services
  Delivers custom hydraulic solutions with over 75 years of combined experience. Supports mining, exploration, and construction sectors with component rebuilds and system upgrades.
  
• Alcaro Hydraulics
  Based in Bullsbrook, offers mobile service and light engineering. Handles hydraulic power packs, machine rebuilds, and pneumatic systems.
  
• Abdex Australia
  Focuses on hose assemblies and high-pressure testing. Their Perth service center supports hydraulic diagnostics and flushing up to 60,000 psi.
  

Installation and commissioning best practices
When installing a breaker attachment:

• Match flow and pressure specs to the host machine
  
• Install a priority flow valve to protect the breaker from overload
  
• Use nitrogen-charged accumulators for energy buffering
  
• Ensure tool lubrication is active—manual or auto-lube
  
• Commission with a full pressure test and tool alignment check
  

One contractor in Perth reported premature tool wear due to incorrect flow settings. After consulting with a local service provider, they installed a flow control valve and extended tool life by 40%.
Maintenance and rebuild intervals

• Inspect bushings and tool shank every 100 hours
  
• Replace seals and piston rings every 500–800 hours
  
• Recharge accumulator nitrogen every 6–12 months
  
• Flush hydraulic lines during rebuilds to prevent contamination
  

Using OEM rebuild kits and certified technicians ensures warranty compliance and performance consistency.
Conclusion
Hydraulic breaker attachments are essential tools in demolition and excavation, but they require precise setup and regular service. Perth operators have access to expert support from Total Rockbreaking Solutions, BA Equipment Group, and other hydraulic specialists. With proper commissioning and maintenance, these tools can deliver years of reliable impact.