Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Are Frantz Toilet Paper Oil Filters Still Worth Using
#1
The Origins and Design of Frantz Filters
Frantz oil filters were first introduced in the 1950s as a bypass filtration system designed to remove microscopic contaminants from engine oil. Unlike full-flow filters that clean all oil passing through the engine, Frantz filters divert a small portion of oil through a dense cellulose medium—originally rolls of toilet paper—before returning it to the sump. This partial-flow method allows for finer filtration without restricting oil pressure or flow.
The concept gained popularity among long-haul truckers and fleet operators who valued extended oil life and reduced engine wear. Frantz filters were often installed as aftermarket kits and became known for their simplicity, low operating cost, and unconventional media.
How the System Works
The Frantz filter operates by tapping into the engine’s pressurized oil system. A small stream of oil is routed through the filter housing, where it passes through a tightly wound roll of cellulose. The filtered oil then drips back into the oil pan via a metered orifice. This slow, continuous process removes fine particles that standard spin-on filters may miss.
Key features include:
  • Bypass filtration: Only a fraction of oil is filtered at a time
  • Cellulose media: Originally toilet paper, now proprietary rolls
  • Low restriction: No impact on engine oil pressure
  • Extended oil cleanliness: Reduces sludge and varnish formation
Modern Use and Operator Experience
Despite being overshadowed by synthetic filters and onboard diagnostics, Frantz filters still have a loyal following. Some operators report using them on vintage trucks, tractors, and stationary engines with great success. One retired mechanic installed a Frantz unit on an old pickup and changed the cellulose roll every three months. He noted cleaner oil and fewer deposits during teardown inspections.
Another user ran a Frantz filter on a Ford Falcon for over 600,000 miles, attributing engine longevity to consistent bypass filtration. While the filter doesn’t eliminate the need for oil changes, it can extend intervals and improve oil quality between services.
Comparison to Other Bypass Systems
Frantz filters are part of a broader category of bypass oil filtration systems. Similar products include:
  • Luberfiner: Common on diesel trucks, uses large canisters and replaceable elements
  • Fram F3P and C3P: Vintage bypass units with proprietary cartridges
  • Stauff filters: Industrial-grade cellulose systems used in hydraulic applications
All share the goal of removing ultra-fine particles without impeding oil flow. However, Frantz filters remain unique for their use of consumer-grade cellulose and compact design.
Installation and Maintenance Tips
To install a Frantz filter:
  • Tap into the engine’s pressurized oil line using a T-fitting
  • Mount the filter housing securely away from heat sources
  • Route the return line to the oil pan or valve cover
  • Use Frantz-approved filter rolls, not commercial toilet paper
Maintenance involves:
  • Changing the cellulose roll every 2–3 months
  • Inspecting hoses and fittings for leaks
  • Monitoring oil color and viscosity
Operators should avoid using soft or scented toilet paper, which may disintegrate or clog the system. Frantz’s proprietary rolls are engineered for durability and consistent flow.
Conclusion
Frantz filters may seem outdated, but they continue to offer value in specific applications where ultra-fine filtration and extended oil life are desired. For vintage engines, off-grid generators, or long-haul vehicles, they provide a low-cost, effective way to maintain oil cleanliness. With proper installation and regular media changes, Frantz filters remain a viable option in the world of bypass filtration.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Is Full Synthetic Engine Oil Worth It for Compact Equipment MikePhua 0 10 Yesterday, 02:03 PM
Last Post: MikePhua
  Are Prowler Replacement Sprockets Worth Using MikePhua 0 13 10-14-2025, 01:27 AM
Last Post: MikePhua
  Is This Big Swivel Worth Repairing or Replacing MikePhua 0 47 10-05-2025, 04:10 PM
Last Post: MikePhua
  Hitachi EX120-2 Fuel Filters and Their Importance MikePhua 0 50 09-30-2025, 07:20 PM
Last Post: MikePhua
  Dynahoe Transmission Filters and Fluid Systems Explained MikePhua 0 39 09-28-2025, 11:52 AM
Last Post: MikePhua
  Is a Backhoe Attachment Still Worth It MikePhua 0 52 09-27-2025, 09:58 PM
Last Post: MikePhua
  Tire Guards for Heavy Equipment: Are They Worth It? MikePhua 0 48 09-24-2025, 02:00 PM
Last Post: MikePhua
  Are Aftermarket Deep Transmission Pans Worth Installing on Pickup Trucks MikePhua 0 58 09-23-2025, 06:10 PM
Last Post: MikePhua
  Samson Tires in Heavy Equipment Are They Worth the Investment MikePhua 0 50 09-20-2025, 12:54 AM
Last Post: MikePhua
  Kubota Fuel Filters: Importance, Types, and Maintenance Tips MikePhua 0 57 09-19-2025, 11:44 PM
Last Post: MikePhua
  Is It Worth Installing Used CAT Tracks on a Different Machine MikePhua 0 60 09-19-2025, 06:10 PM
Last Post: MikePhua
  Is Repairing a Blade Worth It? A Comprehensive Guide to Blade Maintenance MikePhua 0 47 09-16-2025, 12:46 PM
Last Post: MikePhua
  Selling Filters and Small Parts in the Heavy Equipment Industry MikePhua 0 54 09-13-2025, 03:55 PM
Last Post: MikePhua
  Sumitomo LS1600 Hydraulic Filter Numbers: Understanding and Selecting the Right Filters MikePhua 0 59 09-12-2025, 05:47 PM
Last Post: MikePhua
  Which Chainsaw Is Worth Buying for Serious Work MikePhua 0 68 09-12-2025, 05:34 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)