9 hours ago
The Development of the 700H Series
The John Deere 700H crawler dozer was introduced in the early 2000s as part of Deere’s H-series lineup, which aimed to modernize mid-size dozers with improved hydrostatic transmission, enhanced operator ergonomics, and simplified serviceability. Built in Dubuque, Iowa, the 700H was designed to fill the gap between compact grading machines and larger production dozers. With an operating weight of approximately 30,000 pounds and a net engine output of 135 horsepower, the 700H became a popular choice for site prep, forestry, and utility work.
John Deere, founded in 1837, has long been a leader in agricultural and construction equipment. By the time the H-series was launched, Deere had already sold hundreds of thousands of dozers globally. The 700H stood out for its dual-path hydrostatic drive, which allowed for smooth, infinitely variable speed control and counter-rotation—features that enhanced maneuverability in tight spaces and on slopes.
Hydrostatic Drive and Control System
The hydrostatic transmission in the 700H uses two independent hydraulic pumps and motors to power each track. This setup eliminates the need for a traditional clutch-and-gear transmission, offering several advantages:
Common Issues and Diagnostic Strategies
Despite its strengths, the 700H is not immune to wear and electronic faults. One recurring issue involves the machine failing to move forward or backward, even though the engine runs and hydraulics appear functional. This symptom often points to problems in the electronic control system or safety interlocks.
Key areas to inspect include:
A contractor in Tennessee shared that his 700H stopped moving after a routine wash. After checking the seat switch and joystick, he discovered a corroded connector under the cab floor. Cleaning and resealing the connector restored full function. He now avoids pressure washing near electronic components and uses dielectric grease on all exposed terminals.
Another operator in Alberta reported intermittent drive loss during cold mornings. The issue was traced to low hydraulic fluid temperature, which delayed charge pressure buildup. Installing a block heater and switching to low-viscosity fluid resolved the problem.
Preventive Maintenance and Best Practices
To keep the 700H running smoothly:
Some owners have retrofitted their 700H units with:
Market Position and Resale Trends
The 700H remains a sought-after model in the used equipment market. Units with under 5,000 hours and documented service history often sell for $60,000–$80,000, depending on attachments and condition. Machines with hydrostatic issues or electronic faults may sell for half that, making them attractive for rebuild projects.
In 2023, a fleet manager in Georgia purchased three 700H units for a landfill expansion project. After minor repairs and joystick recalibration, the machines performed reliably for over 1,200 hours, demonstrating the model’s durability and serviceability.
Conclusion
The John Deere 700H is a versatile and capable mid-size dozer that blends hydrostatic precision with rugged construction. While electronic and hydraulic issues can arise, most are manageable with proper diagnostics and preventive care. For contractors seeking a reliable grading and clearing machine, the 700H offers a compelling mix of power, control, and long-term value. With thoughtful upgrades and consistent maintenance, it can remain a productive asset for years to come.
The John Deere 700H crawler dozer was introduced in the early 2000s as part of Deere’s H-series lineup, which aimed to modernize mid-size dozers with improved hydrostatic transmission, enhanced operator ergonomics, and simplified serviceability. Built in Dubuque, Iowa, the 700H was designed to fill the gap between compact grading machines and larger production dozers. With an operating weight of approximately 30,000 pounds and a net engine output of 135 horsepower, the 700H became a popular choice for site prep, forestry, and utility work.
John Deere, founded in 1837, has long been a leader in agricultural and construction equipment. By the time the H-series was launched, Deere had already sold hundreds of thousands of dozers globally. The 700H stood out for its dual-path hydrostatic drive, which allowed for smooth, infinitely variable speed control and counter-rotation—features that enhanced maneuverability in tight spaces and on slopes.
Hydrostatic Drive and Control System
The hydrostatic transmission in the 700H uses two independent hydraulic pumps and motors to power each track. This setup eliminates the need for a traditional clutch-and-gear transmission, offering several advantages:
- Precise speed control from 0 to top speed without shifting
- Counter-rotation for tight turns and pivoting
- Dynamic braking through hydraulic resistance
- Simplified operation with joystick controls
Common Issues and Diagnostic Strategies
Despite its strengths, the 700H is not immune to wear and electronic faults. One recurring issue involves the machine failing to move forward or backward, even though the engine runs and hydraulics appear functional. This symptom often points to problems in the electronic control system or safety interlocks.
Key areas to inspect include:
- Seat Switch and Safety Interlocks
If the seat switch fails or is bypassed incorrectly, the machine may refuse to engage drive. Ensure the switch is functional and properly connected.
- Joystick Calibration and Fault Codes
The electronic control module (ECM) may store fault codes related to joystick position sensors. Recalibration or sensor replacement may be necessary.
- Hydraulic Charge Pressure
Low charge pressure can prevent the hydrostatic system from engaging. Check filters, fluid levels, and pump output.
- Transmission Control Module (TCM)
A faulty TCM can disrupt drive signals. Inspect wiring harnesses for corrosion or rodent damage.
- Battery Voltage and Grounding
Weak voltage or poor ground connections can cause erratic behavior. Clean terminals and test battery health.
A contractor in Tennessee shared that his 700H stopped moving after a routine wash. After checking the seat switch and joystick, he discovered a corroded connector under the cab floor. Cleaning and resealing the connector restored full function. He now avoids pressure washing near electronic components and uses dielectric grease on all exposed terminals.
Another operator in Alberta reported intermittent drive loss during cold mornings. The issue was traced to low hydraulic fluid temperature, which delayed charge pressure buildup. Installing a block heater and switching to low-viscosity fluid resolved the problem.
Preventive Maintenance and Best Practices
To keep the 700H running smoothly:
- Replace hydraulic filters every 500 hours
- Use manufacturer-recommended fluid grades for seasonal conditions
- Inspect undercarriage components monthly for wear and alignment
- Calibrate joystick and control sensors annually
- Avoid high-pressure washing near electronic modules
Some owners have retrofitted their 700H units with:
- LED lighting kits for night work
- GPS grading systems for precision earthmoving
- Reinforced belly pans for forestry applications
- Upgraded seat assemblies with suspension and heating
Market Position and Resale Trends
The 700H remains a sought-after model in the used equipment market. Units with under 5,000 hours and documented service history often sell for $60,000–$80,000, depending on attachments and condition. Machines with hydrostatic issues or electronic faults may sell for half that, making them attractive for rebuild projects.
In 2023, a fleet manager in Georgia purchased three 700H units for a landfill expansion project. After minor repairs and joystick recalibration, the machines performed reliably for over 1,200 hours, demonstrating the model’s durability and serviceability.
Conclusion
The John Deere 700H is a versatile and capable mid-size dozer that blends hydrostatic precision with rugged construction. While electronic and hydraulic issues can arise, most are manageable with proper diagnostics and preventive care. For contractors seeking a reliable grading and clearing machine, the 700H offers a compelling mix of power, control, and long-term value. With thoughtful upgrades and consistent maintenance, it can remain a productive asset for years to come.
