Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mack MP8 Regen Problems and Emissions System Diagnostics
#1
The Mack MP8 and Its Role in Heavy-Duty Trucking
The Mack MP8 engine is a 13-liter inline-six diesel powerplant developed for long-haul, vocational, and construction applications. Introduced in the mid-2000s and refined through the 2010s, the MP8 was designed to meet evolving emissions standards while delivering torque-rich performance. Built on Volvo Group’s shared engine platform, the MP8 powers Mack’s Anthem, Pinnacle, and Granite series trucks, offering up to 505 horsepower and 1,860 lb-ft of torque.
Mack Trucks, founded in 1900 and headquartered in Greensboro, North Carolina, has long been a symbol of American trucking. The MP8 became a cornerstone of its EPA-compliant fleet, especially after the implementation of selective catalytic reduction (SCR) and diesel particulate filter (DPF) systems in 2010. By 2018, the MP8 had become one of the most widely deployed engines in Mack’s lineup, with tens of thousands of units on the road.
Terminology Notes
  • DPF (Diesel Particulate Filter): A device that traps soot and particulate matter from exhaust gases.
  • Regen (Regeneration): The process of burning off accumulated soot in the DPF to restore flow and efficiency.
  • SCR (Selective Catalytic Reduction): A system that injects DEF (diesel exhaust fluid) to reduce NOx emissions.
  • Active Regen: A computer-initiated process that raises exhaust temperatures to burn off soot while the truck is in operation.
  • Parked Regen: A manual regeneration process initiated by the driver when the system requests it, typically while stationary.
Symptoms of Regen Failure and Operational Impact
In some 2018 Mack MP8-equipped trucks, operators have reported persistent regen issues. Common symptoms include:
  • Frequent parked regen requests
  • Incomplete or failed regen cycles
  • Loss of power or derate conditions
  • DPF warning lights or fault codes
  • Elevated exhaust backpressure
These problems can lead to reduced fuel economy, increased downtime, and potential damage to the emissions system. In one case, a fleet operator in Alberta noted that his MP8 truck required parked regen every 300 miles, despite highway driving and clean fuel. Eventually, the truck entered limp mode, forcing a tow to the dealer.
Root Causes and Diagnostic Strategy
Regen issues are often multifactorial, involving sensors, software, and mechanical components. A structured diagnostic approach is essential:
  • DPF Pressure Sensors: These sensors monitor the pressure differential across the filter. If clogged or faulty, they may falsely trigger regen requests or prevent completion. Cleaning or replacing the sensors often resolves erratic behavior.
  • Exhaust Temperature Sensors: Regen requires exhaust temperatures above 1,000°F. If sensors misread or fail, the ECM may abort the cycle. Technicians should verify sensor readings during regen and compare them to expected values.
  • Fuel Doser Valve: This valve injects fuel into the exhaust stream to raise temperatures. A malfunctioning doser can prevent active regen. Inspect for carbon buildup, electrical faults, or fuel delivery issues.
  • Software Calibration: ECM updates may address regen logic and sensor thresholds. Trucks with outdated software may experience excessive regen frequency or premature derates. Dealers can reflash the ECM with updated parameters.
  • DEF System Integrity: Though not directly tied to regen, SCR faults can trigger emissions-related derates. Check DEF quality, injector function, and tank sensors.
Operator Anecdotes and Field Experience
A technician in Georgia shared how a 2018 Mack Anthem repeatedly failed regen despite clean filters. After replacing the DPF pressure sensor and updating the ECM software, the truck resumed normal operation. He noted that the original sensor had moisture intrusion, causing erratic readings.
Another driver in British Columbia reported that his MP8 truck entered limp mode after ignoring multiple parked regen requests. The dealer found a clogged doser valve and a cracked exhaust temperature sensor. After repairs, the truck completed regen successfully and regained full power.
Preventive Maintenance and Long-Term Solutions
To minimize regen issues and extend emissions system life, Mack recommends:
  • Performing parked regen when requested—never delay beyond 30 minutes
  • Using high-quality diesel and DEF to reduce contamination
  • Cleaning or replacing DPF pressure sensors every 100,000 miles
  • Inspecting doser valves and exhaust sensors during oil changes
  • Updating ECM software annually or during major service intervals
Some fleets have adopted proactive DPF cleaning schedules, removing and baking filters every 200,000 miles. This reduces backpressure and improves fuel economy.
Recommendations for Technicians and Fleet Managers
  • Use OEM diagnostic tools to monitor regen status and sensor values
  • Log fault codes and regen history for each truck
  • Train drivers to recognize regen requests and respond promptly
  • Keep spare sensors and doser valves in stock for quick turnaround
  • Coordinate with dealers for ECM updates and warranty coverage
Conclusion
Regen issues in the 2018 Mack MP8 engine are often solvable with targeted diagnostics and preventive care. By understanding the interplay between sensors, software, and exhaust components, operators can maintain emissions compliance without sacrificing uptime. The MP8 remains a powerful and efficient engine when its emissions system is properly maintained—a reminder that clean air and strong performance can coexist with the right strategy.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CAT 259D A/C System: Troubleshooting and Solutions MikePhua 0 1 6 minutes ago
Last Post: MikePhua
  Fuel System Diagnostics and Reliability on the CAT 420D Backhoe Loader MikePhua 0 1 51 minutes ago
Last Post: MikePhua
  Diagnosing Transmission Problems in Heavy Equipment with Precision MikePhua 0 1 1 hour ago
Last Post: MikePhua
  Fuel System Troubleshooting and Reliability on the 2018 JCB 3CX Backhoe Loader MikePhua 0 3 1 hour ago
Last Post: MikePhua
  Komatsu 6D125 Engine Problems and Solutions MikePhua 0 3 1 hour ago
Last Post: MikePhua
  Wiring and Electrical System Overhaul on the Case 580K Tractor MikePhua 0 3 1 hour ago
Last Post: MikePhua
  Common Screen Problems in Heavy Equipment and How to Solve Them MikePhua 0 3 1 hour ago
Last Post: MikePhua
  Bobcat Toolcat 5610 Auxiliary Hydraulic System: Troubleshooting and Solutions MikePhua 0 3 2 hours ago
Last Post: MikePhua
  Troubleshooting Gear Shifter Problems on the John Deere 720G Motor Grader MikePhua 0 3 2 hours ago
Last Post: MikePhua
  Hitachi EX270LC Hydraulic Pump Control System: Troubleshooting and Maintenance MikePhua 0 1 2 hours ago
Last Post: MikePhua
  Cracked Bucket Spool Bushing in the Bobcat 753 Hydraulic System MikePhua 0 3 2 hours ago
Last Post: MikePhua
  Pressure Problems in Hydraulic Systems: Troubleshooting and Solutions MikePhua 0 3 5 hours ago
Last Post: MikePhua
  Fiat-Allis FR15 Transmission Shift Problems and Diagnostic Strategy MikePhua 0 3 5 hours ago
Last Post: MikePhua
  Kubota SVL90 Power Loss Diagnostics and Recovery Strategy MikePhua 0 1 5 hours ago
Last Post: MikePhua
  Caterpillar D6D Transmission Diagnostics and Field Repair Strategies MikePhua 0 1 5 hours ago
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)