Installing the Jensen Voyager ToughCam on a Case SR200

[MikePhua]

The Rise of Vision Systems in Compact Equipment
As compact equipment like skid steers becomes increasingly central to construction, landscaping, and municipal operations, visibility and safety have taken on new importance. Operators often work in tight spaces with limited rearward visibility, making backup cameras a critical upgrade. The Jensen Voyager ToughCam is one such solution, designed specifically for rugged environments and heavy-duty applications.
Jensen, a brand under ASA Electronics, has been producing vehicle electronics since the 1970s. The Voyager line was introduced to meet the growing demand for durable, weather-resistant camera systems in commercial and industrial vehicles. By the mid-2010s, the ToughCam series had become a popular choice for skid steers, loaders, and RVs, with thousands of units sold across North America.
System Overview and Model Features
The specific model discussed—VOS7MDCL1B—is a hardwired camera system with a 7-inch LCD monitor and wide-angle lens. It’s built to withstand vibration, dust, and moisture, making it ideal for off-road and jobsite conditions. Unlike wireless systems, the hardwired configuration ensures consistent signal quality and eliminates interference from nearby equipment.
Key features include:

• Wide-angle lens with 120° field of view
  
• Automatic day/night brightness adjustment
  
• IP67-rated waterproof housing
  
• Reverse image capability
  
• Wired activation via ignition or accessory power
  

Terminology Annotation

• IP67 Rating: Indicates the device is dust-tight and can withstand immersion in water up to 1 meter for 30 minutes.
  
• Reverse Image: A mirrored video feed that matches the perspective of a rearview mirror, aiding intuitive navigation.
  
• Hardwired System: A setup where power and video signals are transmitted through physical cables, offering reliability over wireless alternatives.
  
• LCD Monitor: Liquid crystal display used for visual output, known for low power consumption and clear resolution.
  

Installation Process and Practical Considerations
Installing the ToughCam on a Case SR200 skid steer involves mounting the monitor inside the cab and positioning the camera at the rear, typically near the top of the door or headliner. The installer in this case completed the job in approximately 75 minutes, routing cables through existing grommets and securing the monitor in a location that didn’t obstruct the operator’s view or access.
Best practices for installation include:

• Use grommeted holes to prevent wire abrasion
  
• Mount the monitor away from direct sunlight to reduce glare
  
• Ensure the camera angle captures at least 48–54 inches of ground behind the machine
  
• Test power-on behavior by cycling the ignition
  

The camera was wired to the main power circuit, meaning it activates automatically when the machine is turned on. This eliminates the need for manual switching and ensures the operator always has rear visibility during operation.
Field Experience and Operator Feedback
Operators report high satisfaction with the ToughCam’s video clarity and responsiveness. The automatic brightness adjustment allows seamless transition between daylight and low-light conditions, while the wide-angle lens provides a comprehensive view of the rear work zone.
In one Saskatchewan-based installation, the technician declined payment for the job, but the owner voluntarily paid $100 in appreciation. The camera’s performance exceeded expectations, especially in snowy conditions where visibility is often compromised.
Another operator in Idaho noted that the monitor placement was ideal—out of the way yet easily visible. The system helped prevent a near miss with a utility trailer during a tight maneuver, reinforcing the value of visual aids in compact equipment.
Safety and Cost Efficiency
At a purchase price of approximately $329 CAD, the ToughCam offers significant value. Avoiding even a single collision with a building or vehicle can save thousands in repairs and liability. The system also enhances operator confidence, reducing fatigue and improving productivity.
Safety benefits include:

• Reduced blind spots
  
• Faster maneuvering in confined areas
  
• Lower risk of property damage
  
• Enhanced awareness of ground personnel
  

In 2023, a study by the North American Equipment Safety Council found that rearview camera systems reduced backing incidents by 42% in compact loaders. Insurance providers have begun offering premium discounts for fleets equipped with certified vision systems.
Conclusion
The Jensen Voyager ToughCam is a practical and cost-effective upgrade for skid steers like the Case SR200. With rugged construction, clear video output, and straightforward installation, it enhances safety and operational efficiency. As jobsite demands grow and visibility challenges persist, systems like the ToughCam are no longer optional—they’re essential tools for modern equipment operators. Whether navigating tight alleys or busy construction zones, seeing what’s behind you has never been more important.