Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Takeuchi TB235-2 Throttle Control Issues
#1
Introduction
The Takeuchi TB235-2 is a compact, 3.5-ton mini excavator known for its reliability and performance in various construction tasks. Equipped with a Yanmar 3TNV88 engine, it offers 24.4 horsepower at 2,400 rpm and a maximum digging depth of 3,245 mm. Despite its robust design, some operators have reported issues with the throttle control system, particularly the electronic throttle not responding as expected.
Throttle Control System Overview
The TB235-2 utilizes an electronic throttle control system, which allows the operator to adjust engine speed via a dial-type throttle control. This system also features an automatic idle function that reduces engine speed to low idle when the machine is idling for several seconds, enhancing fuel efficiency and reducing engine wear. The throttle system is integrated with the machine's electronic control unit (ECU), which manages engine performance and responds to operator inputs.
Common Throttle Issues
  1. Unresponsive Throttle Input
    Some operators have reported that pressing the throttle switch does not result in an increase in engine speed. This issue persists even when the throttle switch appears to be in good condition. Potential causes include:
    • Faulty Throttle Switch: The switch may not be sending the correct signal to the ECU.
    • Wiring Issues: Loose or damaged wiring connections can disrupt the signal transmission.
    • ECU Malfunction: A malfunctioning ECU may fail to process throttle inputs correctly.
  2. Throttle Cable Problems
    In some cases, the throttle cable may become damaged or disconnected. For instance, a user reported that the cable controlling the throttle from the auto actuator was broken, causing the throttle to remain unresponsive. Replacing the damaged cable resolved the issue.
  3. Auto Idle Function Failure
    The auto idle feature, which automatically reduces engine speed when the machine is idling, may stop working if the throttle control system is not functioning properly. This can lead to higher fuel consumption and increased engine wear.
Diagnostic and Repair Steps
  1. Inspect the Throttle Switch
    • Check for any visible damage or wear on the throttle switch.
    • Test the switch for continuity using a multimeter to ensure it is functioning correctly.
  2. Examine Wiring Connections
    • Inspect all wiring connections between the throttle switch, ECU, and throttle actuator.
    • Look for signs of corrosion, loose connections, or damaged wires.
  3. Test the ECU
    • If the throttle switch and wiring are in good condition, the issue may lie with the ECU.
    • Use diagnostic tools to check the ECU for any fault codes or malfunctions.
  4. Check the Throttle Cable
    • Inspect the throttle cable for any signs of damage or disconnection.
    • If the cable is damaged, replace it with a new one.
Preventative Maintenance
  • Regular Inspections: Conduct regular inspections of the throttle control system, including switches, wiring, and cables, to identify potential issues before they become major problems.
  • Proper Storage: Store the machine in a clean, dry environment to prevent corrosion and damage to electrical components.
  • Use Quality Parts: Always use genuine Takeuchi parts for replacements to ensure compatibility and reliability.
Conclusion
Throttle control issues in the Takeuchi TB235-2 can stem from various components, including the throttle switch, wiring, ECU, and throttle cable. By systematically diagnosing and addressing these components, operators can restore proper throttle function and maintain the machine's performance. Regular maintenance and prompt attention to any issues can help prevent throttle control problems and ensure the longevity of the TB235-2.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Identifying and repairing shifting issues on a vintage Hough loader MikePhua 0 5 3 hours ago
Last Post: MikePhua
  Takeuchi TB240CRA screen failure and hydraulic claw diagnosis MikePhua 0 6 3 hours ago
Last Post: MikePhua
  Troubleshooting the JCB 532 Loadall: Common Issues and Solutions MikePhua 0 7 3 hours ago
Last Post: MikePhua
  Troubleshooting Travel Issues on a Case 340 Skid Steer MikePhua 0 8 3 hours ago
Last Post: MikePhua
  Metal Particles in Gear Oil from Final Drives in Takeuchi TL140 MikePhua 0 3 3 hours ago
Last Post: MikePhua
  Case 580B Throttle Foot Feed Return Spring Maintenance MikePhua 0 6 4 hours ago
Last Post: MikePhua
  Case W36 Hydraulic Issues and Troubleshooting MikePhua 0 7 4 hours ago
Last Post: MikePhua
  Diagnosing Control Lag in the Simon 32' All-Terrain Scissor Lift MikePhua 0 13 Yesterday, 03:20 PM
Last Post: MikePhua
  Cone Crusher Performance Issues and Practical Troubleshooting MikePhua 0 10 Yesterday, 03:11 PM
Last Post: MikePhua
  Replacing Front Glass on a Takeuchi TB180FR Mini Excavator MikePhua 0 11 Yesterday, 03:06 PM
Last Post: MikePhua
  Diagnosing and Resolving Crankshaft Position Sensor Issues in Caterpillar 299D MikePhua 0 7 Yesterday, 02:33 PM
Last Post: MikePhua
  Fuel Starvation and Performance Issues in the Caterpillar IT28G MikePhua 0 6 Yesterday, 02:32 PM
Last Post: MikePhua
  Hydraulic Issues in Caterpillar D5N Track-Type Tractors MikePhua 0 7 Yesterday, 02:26 PM
Last Post: MikePhua
  Case 580K Injection Pump Throttle Linkage Fuel Leak and Repair Strategy MikePhua 0 6 Yesterday, 02:25 PM
Last Post: MikePhua
  Hydraulic System Issues in New Holland Equipment MikePhua 0 5 Yesterday, 02:06 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: