Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Horsepower Ratings on the Caterpillar D6H Series II and the Realities of Contract Bidding
#1
The D6H Series II and Its Place in Caterpillar’s Dozer Line
The Caterpillar D6H Series II dozer was introduced in the late 1980s as part of Caterpillar’s evolution of the mid-size track-type tractor. Designed for grading, fire line construction, and general earthmoving, the D6H filled a critical niche between the lighter D5 and the heavier D7. With a turbocharged six-cylinder diesel engine and torque converter drive, the D6H Series II offered improved operator comfort, hydraulic blade control, and enhanced drawbar pull compared to its predecessors.
Caterpillar’s D6 series has been one of the most widely deployed dozers in North America, with tens of thousands of units sold across forestry, construction, and military sectors. The Series II variant refined the original D6H platform with better cooling, updated electronics, and more consistent power delivery.
Gross vs Net Horsepower and the Confusion in Ratings
One of the most misunderstood aspects of dozer specifications is the difference between gross and net horsepower. Gross horsepower refers to the engine’s output without any parasitic losses—measured at the crankshaft before accessories like the fan, alternator, or hydraulic pump are installed. Net horsepower, on the other hand, reflects the usable power after these losses are accounted for.
For the D6H Series II, Caterpillar advertised a gross horsepower of 165 HP. However, depending on the configuration and testing method, the net horsepower may vary slightly—typically landing between 150 and 160 HP. This discrepancy becomes critical in contract bidding environments where horsepower thresholds determine rate tiers or dispatch priority.
The VPR Contract and Competitive Bidding Dynamics
In wildfire suppression contracts, such as those governed by the VPR (Vendor Payment Rate) system, dozer horsepower can influence hourly compensation. Some contracts use a point-based system where machine attributes—like horsepower, blade type, and undercarriage width—are scored and factored into bid evaluation. If a machine can be documented as having even one horsepower over a threshold (e.g., 165 HP), it may qualify for a higher rate or better dispatch ranking.
However, this creates a gray area. Contractors may attempt to use gross horsepower ratings to justify higher bids, even though net horsepower is more representative of actual field performance. Since there is no universal enforcement of which rating to use, it becomes a strategic decision—one that can backfire if challenged.
Test Specifications and the Danger of Misinterpretation
Caterpillar’s internal engine test specifications often list raw output figures for bare engines—without fan, hydraulic load, or generator. These numbers can exceed advertised ratings but are not intended for contract use. Attempting to present these figures in a bid may be seen as misleading, especially if the contract language is built around standardized machine classes.
For example, using a bare engine output of 170 HP to claim D7-level compensation for a D6H could trigger scrutiny or rejection. Most agencies understand the nuances of engine testing and expect contractors to use published net ratings or manufacturer-advertised specs.
Serial Number Identification and Model Variants
The D6H Series II includes multiple sub-models, each with slightly different configurations. Serial numbers like 6CF5575 can be used to trace build sheets and determine factory horsepower settings. Some later units received minor power increases due to turbocharger tuning or fuel delivery adjustments, but these changes were rarely documented in public spec sheets.
Contractors seeking to verify horsepower should:
  • Contact Caterpillar with the full serial number
  • Request build sheet or engine configuration data
  • Cross-reference with EPA Tier certification documents
  • Avoid relying solely on online spec summaries
Strategic Use of Horsepower in Bidding
In competitive bidding environments, contractors must weigh the benefits of claiming higher horsepower against the risk of misclassification. While a one-horsepower increase may seem trivial, it can shift a machine into a different rate bracket or affect dispatch priority.
Best practices include:
  • Using manufacturer-advertised horsepower unless otherwise specified
  • Documenting engine configuration with serial number and build sheet
  • Avoiding bare engine test specs unless explicitly allowed
  • Consulting with contract administrators before submitting bids
One contractor noted that the bidding system allowed any price to be submitted, but the final ranking was determined by dividing the bid by the machine’s point score. In this system, horsepower was just one factor—but a critical one when margins were tight.
Conclusion
The Caterpillar D6H Series II remains a workhorse in fire line construction and grading, but its horsepower rating is more than a number—it’s a strategic tool in contract bidding. Understanding the difference between gross and net horsepower, verifying engine specs, and navigating the nuances of bid scoring are essential for contractors seeking to maximize their position without overstepping.
In the world of heavy equipment, power isn’t just measured in torque—it’s measured in paperwork, precision, and the ability to play the game without losing your footing.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Evaluating the Market Value of a Caterpillar D6C 56J Dozer MikePhua 0 3 32 minutes ago
Last Post: MikePhua
  Caterpillar 277C: An Overview of Performance and Maintenance MikePhua 0 7 1 hour ago
Last Post: MikePhua
  Towing a Caterpillar D5G: Key Considerations and Best Practices MikePhua 0 5 Yesterday, 08:35 PM
Last Post: MikePhua
  Introduction to Deere M-Series Bunchers: New Era in Forestry Equipment MikePhua 0 10 Yesterday, 08:28 PM
Last Post: MikePhua
  Caterpillar D6 9U: A Classic Workhorse in Heavy Equipment MikePhua 0 6 Yesterday, 08:04 PM
Last Post: MikePhua
  Caterpillar D8K Scrapers: A Powerful Combination for Earthmoving MikePhua 0 9 Yesterday, 06:04 PM
Last Post: MikePhua
  Buying a Caterpillar D4 Dozer: What You Should Know MikePhua 0 5 Yesterday, 05:43 PM
Last Post: MikePhua
  Caterpillar 966B Wheel Loader Overview MikePhua 0 5 Yesterday, 05:21 PM
Last Post: MikePhua
  2005 Deere 755C Series 2 Dozer Steering Control Issue MikePhua 0 10 Yesterday, 04:23 PM
Last Post: MikePhua
  Understanding Horsepower Ratings in Heavy Equipment MikePhua 0 4 Yesterday, 04:11 PM
Last Post: MikePhua
  EP287C: Understanding the Caterpillar Compact Track Loader MikePhua 0 11 Yesterday, 04:04 PM
Last Post: MikePhua
  Trimble GCS600 for Caterpillar Excavators: Enhancing Precision in Construction MikePhua 0 9 Yesterday, 04:03 PM
Last Post: MikePhua
  Design Quirks and Retrofit Options for the Ford L9000 Series MikePhua 0 7 10-21-2025, 06:24 PM
Last Post: MikePhua
  Differences Between the 1998 Case 580SL Series 1 and Series 2 MikePhua 0 5 10-21-2025, 06:21 PM
Last Post: MikePhua
  Caterpillar 902 Compact Wheel Loader Overview MikePhua 0 4 10-21-2025, 05:47 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)