Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Diagnosing Unusual Pilot Pump Behavior on the Hitachi EX120
#1
The Role of the Pilot Pump in Excavator Control
In hydraulic excavators like the Hitachi EX120, the pilot pump plays a critical role in delivering low-pressure hydraulic fluid to the control valves. This fluid powers the pilot circuits that actuate the main valve spools, enabling precise control of boom, arm, bucket, and travel functions. Unlike the main pump, which operates at high pressure for heavy lifting, the pilot pump typically runs at 400–600 psi and supports joystick responsiveness and proportional control.
When the pilot pump exhibits abnormal behavior—such as rapid pulsing at the outlet hose—it can signal deeper issues in the hydraulic system, affecting machine responsiveness and safety.
Identifying Fast Pulsing in the Pilot Line
A technician observing the pilot pump outlet hose on an EX120 noted an unusually fast pulse, deviating from the expected smooth flow. This symptom may indicate:
  • Pressure instability
  • Air entrainment in the pilot circuit
  • Internal leakage in the pump or control valve
  • Flow restriction downstream of the pump
  • Cavitation due to suction-side issues
Fast pulsing is not typical in pilot systems, which are designed for steady, low-pressure delivery. It suggests that the pump is either overcompensating or encountering resistance that causes pressure fluctuations.
Potential Causes of Pressure Instability
Several mechanical and hydraulic factors can contribute to erratic pilot pump behavior:
  • Worn Pump Components
    If the pump’s internal gears or vanes are worn, it may struggle to maintain consistent output, especially at idle. This can cause surging or pulsing in the outlet line.
  • Air in the System
    A cracked suction hose or loose fitting can introduce air into the pilot circuit. Air bubbles compress and expand under pressure, creating a pulsing effect.
  • Blocked Pilot Filter
    A clogged pilot filter restricts flow and forces the pump to work harder, leading to pressure spikes and erratic delivery.
  • Faulty Pressure Regulator
    The pilot system includes a pressure-reducing valve to maintain safe operating pressure. If this valve sticks or malfunctions, pressure may fluctuate rapidly.
  • Control Valve Leakage
    Internal leakage in the pilot control valves can cause pressure drops and recovery cycles, resulting in visible pulsing at the hose.
Diagnostic Steps and Field Testing
To isolate the issue:
  • Install a low-pressure gauge at the pilot pump outlet and monitor pressure stability
  • Inspect the suction hose for cracks, soft spots, or loose clamps
  • Replace the pilot filter and check for contamination
  • Test the pressure-reducing valve for proper function and spring tension
  • Bleed the pilot circuit to remove trapped air
  • Check joystick response and control valve behavior under load
If pressure fluctuates more than ±50 psi during idle or joystick actuation, further investigation is warranted.
Field Anecdotes and Practical Solutions
One operator in Southeast Asia reported similar symptoms on a Komatsu PC120. After replacing the pilot pump with a rebuilt unit, the pulsing persisted. The real culprit was a collapsed suction hose that looked fine externally but had delaminated internally. Replacing the hose resolved the issue instantly.
Another technician found that a pilot filter element had disintegrated, sending debris into the pressure-reducing valve. After cleaning the valve and replacing the filter, the pilot circuit stabilized.
Preventive Measures and Long-Term Reliability
To maintain pilot system health:
  • Replace pilot filters every 500–750 hours
  • Use hydraulic fluid with proper anti-foaming additives
  • Inspect hoses and fittings during every service interval
  • Monitor pilot pressure during machine startup and warm-up
  • Train operators to report sluggish controls or erratic joystick response
For older machines like the EX120, pilot pump wear is common after 8,000+ hours. Rebuilding or replacing the pump may be necessary, but only after confirming that downstream components are functioning correctly.
Conclusion
Fast pulsing at the pilot pump outlet on a Hitachi EX120 is more than a curiosity—it’s a warning sign of pressure instability, air ingress, or flow restriction. By methodically inspecting the pump, hoses, filters, and valves, technicians can restore smooth pilot operation and ensure precise control. In hydraulic systems, consistency is key—and the pilot circuit is where precision begins.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Diagnosing and Fixing Exhaust Popping Sounds on a 48A MikePhua 0 3 1 hour ago
Last Post: MikePhua
  Diagnosing low power in a 1999 Mack RD688S with E7 VMAC III system MikePhua 0 2 1 hour ago
Last Post: MikePhua
  Diagnosing Control Lag in the Simon 32' All-Terrain Scissor Lift MikePhua 0 13 Yesterday, 03:20 PM
Last Post: MikePhua
  Hitachi EX200LC-3 Wiring Harness Replacement and Electrical System Overview MikePhua 0 10 Yesterday, 03:16 PM
Last Post: MikePhua
  Diagnosing and Resolving Engine Knock in JCB 1550 Backhoes MikePhua 0 7 Yesterday, 03:06 PM
Last Post: MikePhua
  Hitachi EX120-2 Hydraulic Conversion Kit Installation MikePhua 0 10 Yesterday, 02:55 PM
Last Post: MikePhua
  Case 621 Transmission Behavior and Troubleshooting Strategy MikePhua 0 9 Yesterday, 02:36 PM
Last Post: MikePhua
  Diagnosing and Resolving Crankshaft Position Sensor Issues in Caterpillar 299D MikePhua 0 7 Yesterday, 02:33 PM
Last Post: MikePhua
  Diagnosing Brake Failure on the Komatsu D65E-7 Dozer MikePhua 0 10 Yesterday, 02:33 PM
Last Post: MikePhua
  Case 580K Injection Pump Throttle Linkage Fuel Leak and Repair Strategy MikePhua 0 6 Yesterday, 02:25 PM
Last Post: MikePhua
  Hitachi EX200 Undercarriage Performance and Upgrade Strategies MikePhua 0 8 Yesterday, 02:21 PM
Last Post: MikePhua
  Why Is the Hitachi EX120-3 Having Hydraulic Trouble MikePhua 0 5 Yesterday, 01:43 PM
Last Post: MikePhua
  Replacing the Water Pump on a 1970 Case 580CK MikePhua 0 4 10-18-2025, 08:10 PM
Last Post: MikePhua
  Diagnosing Starter Failure on the International Harvester 100E MikePhua 0 3 10-18-2025, 08:05 PM
Last Post: MikePhua
  Diagnosing Hydraulic Failure on the CAT 951C Track Loader MikePhua 0 6 10-18-2025, 07:53 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)