Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Detroit Diesel 12V71 Oil Pressure Dilemma
#1
Engine Heritage
The Detroit Diesel Series 71, introduced in 1938 as a compact two-stroke powerhouse, powered everything from WWII landing craft to heavy-duty trucks. Its 12V–71 variant, with 12 cylinders forming a V configuration, delivered up to 475 hp—making it a legend among diesel engines.

Typical Oil Pressure Expectations
Low oil pressure is a known characteristic of aging Detroit diesels:
  • At idle, especially when hot, pressure can drop to 2–8 psi, which is generally acceptable.
  • At 1,800 rpm, healthy rebuilt engines should show approximately 50 psi.

Common Causes of Low Oil Pressure
Several factors contribute to weak oil pressure:
  • Bypass filters or restrictors: Faulty elements here, such as worn-out “sock filters,” often cause low pressure at idle.
  • Bearing wear: Loose main or rod bearings increase oil leakage, reducing pressure—especially at higher speeds.
  • Oil pickup screen or pump issues: Debris clogging the pickup or worn pump components can reduce pressure flow.

Diagnostic Approach & Fixes
To troubleshoot oil pressure issues on a 12V71:
  1. Check filter configuration
    Ensure the bypass filter has the correct restrictor and proper media—faulty filters often mimic pressure loss.
  2. Observe pressure vs RPM
    If pressure climbs slowly with RPM but stays too low at 1,800 rpm (e.g. 14.5 psi instead of ~50 psi), that's a red flag.
  3. Inspect bearings
    Loose rod or main bearings let oil escape before building pressure. Older engines especially suffer from this.
  4. Evaluate oil pump and pickup screen
    Remove the oil pan if necessary and check for screen blockages. Inspect pump condition and regulator operation.
  5. Test via correct pressure port
    Owners sometimes connect a gauge to the proper oil port (not just the gauge hole) to get accurate readings.

User Insights
A mechanic working on a 12V71 shared:
Quote:“Detroit engines don’t hold much oil pressure at idle, especially once warm.”
But seeing only 1 bar (~14.5 psi) at 1,800 rpm was far below expectations—more like 50 psi would be healthy.
Another recalls replacing bearings and pump components but still seeing low pressure—only to discover worn camshaft bearings at fault.

Key Terminology
  • Bypass filter – A secondary filter with a restrictor that lets oil by when the main filter clogs.
  • Pickup screen – Mesh strainer at tank mouth used to filter out major debris before oil enters the pump.
  • Bearing clearance – The gap between rotating parts; too much clearance lowers oil pressure dramatically.

Takeaways
  • Low idle pressure is normal in warmed-up Detroit diesels—but pressure at higher RPM should still meet or approach spec.
  • When seeing ~14 psi at 1,800 rpm, suspect worn bearings, bad filters, or clogged pickups—not just low-pressure normality.
  • Start diagnosis with filters and routing, then move to mechanical components like bearings and the oil pump.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Low Fuel Pressure in John Deere 331G Skid Steer Loaders MikePhua 0 9 Yesterday, 02:31 PM
Last Post: MikePhua
  Can You Rebuild a Detroit 4-53T Without Losing Timing MikePhua 0 9 Yesterday, 02:06 PM
Last Post: MikePhua
  How Do You Remove Sleeves from a Case 188D Diesel Engine MikePhua 0 5 Yesterday, 01:45 PM
Last Post: MikePhua
  Troubleshooting Transmission Pressure Loss on a Champion 710A MikePhua 0 4 10-18-2025, 08:06 PM
Last Post: MikePhua
  Why Does the Transmission Pressure Sensor Keep Failing on a Volvo L150C MikePhua 0 8 10-18-2025, 08:04 PM
Last Post: MikePhua
  Locating and Replacing the Low Pressure A/C Switch on the Kubota SVL95-2s MikePhua 0 7 10-18-2025, 05:46 PM
Last Post: MikePhua
  Diagnosing Low Charge Pressure on the Bobcat T200 MikePhua 0 3 10-18-2025, 05:39 PM
Last Post: MikePhua
  Intermittent Fuel Starvation in a CAT 305C and the Hidden Complexity of Diesel Delivery MikePhua 0 6 10-18-2025, 05:25 PM
Last Post: MikePhua
  Why Did the Takeuchi TL130 Lose Boom Down Pressure MikePhua 0 9 10-18-2025, 05:20 PM
Last Post: MikePhua
  Cat D6N Fuel Pressure Loss: Causes, Symptoms, and Solutions MikePhua 0 11 10-18-2025, 04:32 PM
Last Post: MikePhua
  Why Is There No Fuel Pressure on a Bandit 1590 with CAT/Perkins 3054C MikePhua 0 5 10-18-2025, 02:43 PM
Last Post: MikePhua
  How to Check and Adjust Auxiliary Hydraulic Pressure Relief for a Thumb Attachment MikePhua 0 9 10-18-2025, 02:40 PM
Last Post: MikePhua
  What Causes Piston and Sleeve Failure in a Deere 6068H Diesel Engine MikePhua 0 10 10-17-2025, 03:13 PM
Last Post: MikePhua
  Relief Pressure in Komatsu Excavators: Focus on the PC200LC-8 MikePhua 0 5 10-16-2025, 11:43 PM
Last Post: MikePhua
  Diagnosing a Non-Starting 7.3L Power Stroke Diesel MikePhua 0 11 10-16-2025, 09:55 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)