Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrading the Charging System on the Caterpillar D7 17A Dozer
#1
The D7 17A and Its Electrical Legacy
The Caterpillar D7 17A series was introduced in the 1950s as part of Cat’s post-war expansion of its track-type tractor lineup. Known for its mechanical simplicity and rugged build, the 17A was powered by the D7 diesel engine and often paired with a pony motor for starting. Its electrical system was originally designed around a generator rather than an alternator, reflecting the technology of the time.
Generators, while reliable in their era, produce variable voltage and are less efficient at low RPMs. As electrical demands increased—especially with the addition of lighting, radios, and auxiliary systems—many operators sought to upgrade to alternators, which offer consistent voltage output and better charging performance.
Terminology Clarification
  • Generator: A DC charging unit common in older equipment, less efficient and sensitive to RPM.
  • Alternator: An AC charging unit with built-in rectifiers, more efficient and stable across RPM ranges.
  • Adapter Plate: A custom or commercial bracket used to mount an alternator in place of a generator.
  • Flex Coupling: A vibration-dampening connector between the engine and alternator shaft.
  • Cooling Fan: A component mounted on the alternator to prevent overheating during extended use.
Challenges in Converting to an Alternator
Swapping a generator for an alternator on the D7 17A is not a plug-and-play operation. The mounting points, shaft alignment, and belt tension systems differ significantly. Most conversions require a custom adapter plate or a repurposed generator housing. Some operators fabricate their own brackets using scrap steel, while others source commercial kits that include flex couplings and cooling fans.
Commercial conversion kits can cost upwards of $450, depending on the quality and included components. Units with Delco alternators are preferred due to their reliability and parts availability. However, some kits use less common brands like Motorola or Leece-Neville, which may complicate future servicing.
Recommended Components and Sources
For a successful conversion, consider the following:
  • Delco 10SI or 12SI alternator rated at 63–94 amps
  • Adapter plate with pre-drilled mounting holes and belt alignment guides
  • Flex coupling to reduce vibration and shaft stress
  • Integrated cooling fan or external airflow ducting
  • Voltage regulator compatible with 12V or 24V systems, depending on the dozer’s configuration
Operators have reported success sourcing parts from tractor salvage yards, vintage equipment suppliers, and specialty rebuilders. In Ohio and California, shops like Granger Tractor and Florin Tractor have been known to stock or fabricate conversion kits for legacy Caterpillar machines.
Installation Tips and Safety Considerations
Before beginning the conversion:
  • Disconnect all power sources and verify battery polarity
  • Measure pulley alignment and belt tension to prevent premature wear
  • Ensure the alternator’s amperage matches the electrical load of the machine
  • Use lock washers and thread sealant to prevent vibration-related loosening
  • Test voltage output after installation to confirm proper charging
One technician in California shared that he retrofitted a Delco alternator into a D7 17A using a modified generator housing and a homemade bracket. After two years of operation, the system remained stable, and the alternator showed no signs of overheating or bearing wear.
Field Anecdotes and Practical Lessons
In rural Missouri, a contractor converted his D7 17A to an alternator system after repeated generator failures during winter logging operations. The original generator struggled to maintain charge at idle, especially when running auxiliary lights. After installing a Delco alternator with a cooling fan and flex coupling, the machine started more reliably and maintained battery health even in sub-freezing temperatures.
Another operator in Alberta noted that his alternator conversion allowed him to add a cab heater and GPS unit without overloading the electrical system. He emphasized the importance of using a high-quality voltage regulator to avoid voltage spikes that could damage sensitive electronics.
Conclusion
Upgrading the charging system on a Caterpillar D7 17A dozer is a worthwhile investment for operators seeking reliability and modern electrical performance. While the conversion requires careful planning and fabrication, the benefits—stable voltage, improved cold-weather starting, and support for auxiliary systems—make it a popular modification among vintage equipment owners. With the right components and attention to detail, the D7 17A can continue working hard with a charging system that meets today’s demands.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Removing a Link from a Track Chain on a Case 450 Dozer MikePhua 0 9 7 hours ago
Last Post: MikePhua
  Diagnosing low power in a 1999 Mack RD688S with E7 VMAC III system MikePhua 0 11 7 hours ago
Last Post: MikePhua
  Caterpillar D3G hydrostatic transmission sluggishness and diagnostic approach MikePhua 0 10 7 hours ago
Last Post: MikePhua
  JD319D hydraulic system fails to engage MikePhua 0 8 8 hours ago
Last Post: MikePhua
  International TD-20B Dozer and DT-429 Engine Push Rod Replacement MikePhua 0 11 Yesterday, 04:18 PM
Last Post: MikePhua
  Caterpillar D4E Final Drive Flushing: Best Practices for Maintenance MikePhua 0 11 Yesterday, 03:17 PM
Last Post: MikePhua
  Hitachi EX200LC-3 Wiring Harness Replacement and Electrical System Overview MikePhua 0 10 Yesterday, 03:16 PM
Last Post: MikePhua
  Volvo EC240B Wiper System Troubleshooting MikePhua 0 6 Yesterday, 03:05 PM
Last Post: MikePhua
  ChatGPT said: Caterpillar 953A Steering Troubleshooting MikePhua 0 9 Yesterday, 03:04 PM
Last Post: MikePhua
  Rebuilding a Komatsu D155AX-6 Dozer with the Right Technical Resources MikePhua 0 9 Yesterday, 02:58 PM
Last Post: MikePhua
  Caterpillar D6C Final Drive Oil Leak and Dead Shaft Repair Strategy MikePhua 0 11 Yesterday, 02:55 PM
Last Post: MikePhua
  John Deere 850J Dozer Code TCU620.4 and Electrical Fault Tracing MikePhua 0 10 Yesterday, 02:38 PM
Last Post: MikePhua
  Bobcat T190 Cab Heater System: Troubleshooting and Maintenance MikePhua 0 12 Yesterday, 02:38 PM
Last Post: MikePhua
  Caterpillar D8H Starter Adaptation and Theft Recovery Challenges MikePhua 0 10 Yesterday, 02:35 PM
Last Post: MikePhua
  Diagnosing and Resolving Crankshaft Position Sensor Issues in Caterpillar 299D MikePhua 0 7 Yesterday, 02:33 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)