Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hitachi ZX17U-5 Track Tension Issue
#1
Maintaining proper track tension on the Hitachi ZX17U-5 mini excavator is crucial for optimal performance, component longevity, and safe operation. Improper track tension, whether too loose or too tight, can lead to accelerated wear, poor traction, and increased risk of track derailment.
Impact of Incorrect Track Tension
  • Too Tight: Excessive tension increases the load on the drive sprocket, idlers, and track links, causing premature wear and higher fuel consumption due to increased rolling resistance. The machine may also experience harder steering and reduced maneuverability.
  • Too Loose: Loose tracks can slip, skip or even derail, leading to damage to undercarriage components and potential safety hazards. Loose tracks also cause a rough ride and inefficient power transfer.
Checking and Adjusting Track Tension
  • Track tension should be checked regularly against manufacturer specifications; for small excavators like ZX17U-5, the allowable sag is minimal.
  • The process involves raising the machine slightly, usually with the bucket lowered to stabilize the undercarriage.
  • Grease is added or released from the track adjuster cylinder or tensioner mechanism to fine-tune tension.
  • One shot from a grease gun can alter tension by several millimeters; therefore, small incremental adjustments and rechecks are vital.
Environmental and Operating Factors
  • Operating in muddy or rocky terrain can compact material between track links and rollers, affecting tension and wear.
  • Regular cleaning of mud and debris helps prevent increased tension and uneven wear.
  • Limit reverse travel as reverse puts greater loads on pins, bushings, and sprocket teeth, accelerating wear.
Maintenance Practices
  • Frequent inspections of the undercarriage and track system identify early signs of wear or tension loss.
  • Cleaning track frames and rollers prevents material buildup which would otherwise affect tension and cause premature wear.
  • Replace worn parts such as track pins, bushings, and rollers promptly to maintain track system integrity.
Expert Recommendations
  • Follow the operator’s manual instructions for track tension adjustment specific to ZX17U-5.
  • Use high-quality grease compatible with the track adjuster to ensure smooth operation.
  • Consider undercarriage component wear when resetting track tension; worn parts may require more frequent adjustments.
  • Train operators on the importance of track tension and proper skid steer operation to extend component life.
Summary
Proper track tension on the Hitachi ZX17U-5 mini excavator is a balance crucial for machine longevity and performance. Too tight tension accelerates component wear and increases fuel use, while overly loose tracks risk derailment and damage. Regular inspection, cleaning, and careful adjustment using the hydraulic tensioner system maintain correct track sag, ensuring efficient, safe, and productive excavator operations across diverse job site conditions.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Hitachi EX120-3 Hydraulic Lag and PVC System Faults MikePhua 0 8 7 hours ago
Last Post: MikePhua
  Track Adjuster Leaking Down and Repeated Recharging MikePhua 0 8 7 hours ago
Last Post: MikePhua
  Caterpillar 950GC Breather Filter Steam Issue MikePhua 0 5 7 hours ago
Last Post: MikePhua
  Caterpillar 644H De-Fueling Issue: Troubleshooting and Solutions MikePhua 0 5 7 hours ago
Last Post: MikePhua
  Hitachi EX60 Final Drive Compatibility and Maintenance Insights MikePhua 0 6 7 hours ago
Last Post: MikePhua
  Hitachi EX50 URG Bottom Rollers: Maintenance and Troubleshooting MikePhua 0 6 Yesterday, 06:55 PM
Last Post: MikePhua
  Safely Removing the Belly Pan on a CAT 963C Track Loader MikePhua 0 7 Yesterday, 06:43 PM
Last Post: MikePhua
  CAT E240 Track Brake Issues During Tramming: Causes and Solutions MikePhua 0 6 Yesterday, 06:42 PM
Last Post: MikePhua
  Replacing the Front Track Idler on an International TD15C Dozer MikePhua 0 3 Yesterday, 06:28 PM
Last Post: MikePhua
  Troubleshooting Slow Hydraulic Response on Hitachi Zaxis 50U MikePhua 0 5 Yesterday, 06:26 PM
Last Post: MikePhua
  Diagnosing Fuel Pressure Drop and Power Loss on a CAT 977L Track Loader MikePhua 0 5 Yesterday, 06:12 PM
Last Post: MikePhua
  Replacing Track Idler Bearings on a CAT 304.5 Mini Excavator MikePhua 0 4 Yesterday, 06:07 PM
Last Post: MikePhua
  CAT 349E Track Tensioner: Maintenance and Troubleshooting MikePhua 0 2 Yesterday, 06:02 PM
Last Post: MikePhua
  Hitachi EX60 Excavator Laboring During Travel: Troubleshooting and Solutions MikePhua 0 5 Yesterday, 05:58 PM
Last Post: MikePhua
  Diagnosing Track Lockup on a CAT D5K2 Dozer MikePhua 0 2 Yesterday, 05:56 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)