Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Diagnosing Slow Travel Speed in the BOMAG BW226 DH-4 Roller
#1
The BOMAG BW226 DH-4 is a robust single-drum vibratory roller, renowned for its efficiency in soil compaction tasks. However, some operators have reported issues with the machine's travel speed, particularly when selecting the high-speed setting. This article delves into potential causes and solutions for this problem, ensuring optimal performance of the equipment.
Understanding the Travel System
The BW226 DH-4 utilizes a hydrostatic drive system for its travel mechanism. This system relies on hydraulic pumps and motors to propel the machine. The travel speed is determined by the displacement of these components and the flow rate of the hydraulic fluid. A reduction in expected speed can be attributed to several factors within this system.
Potential Causes of Reduced Travel Speed
  1. Speed Sensor Malfunction
    The machine is equipped with speed sensors that monitor the rotational speed of the wheels. If these sensors fail or provide incorrect readings, the control system may limit the travel speed to prevent potential damage. Fault codes such as 1105 and 1115 indicate issues with the front and rear travel motor speed sensors, respectively .
  2. Proportional Valve Issues
    The hydrostatic drive system includes proportional valves that regulate the flow of hydraulic fluid to the travel motors. If these valves malfunction or become obstructed, they can restrict the flow, leading to reduced speed. Fault codes like 1117 point to problems with the proportional valve control .
  3. Hydraulic Pressure Problems
    Insufficient hydraulic pressure can result from issues such as low fluid levels, worn pumps, or clogged filters. This lack of pressure can hinder the performance of the travel motors, causing the machine to move slower than expected.
  4. Electrical System Faults
    The control system of the BW226 DH-4 relies on a network of electrical connections and sensors. Loose connections, damaged wiring, or faulty components can disrupt communication between the control unit and the travel system, leading to reduced speed.
Diagnostic Steps
To accurately diagnose the cause of the slow travel speed:
  • Check for Fault Codes: Use the machine's diagnostic interface to retrieve any stored fault codes. Codes related to speed sensors or proportional valves can provide direct insight into the issue.
  • Inspect Speed Sensors: Examine the front and rear speed sensors for signs of damage or contamination. Ensure that the wiring is intact and securely connected.
  • Test Hydraulic Pressure: Using a pressure gauge, measure the hydraulic pressure at various points in the system. Compare the readings with the manufacturer's specifications to identify any discrepancies.
  • Inspect Electrical Connections: Check all relevant electrical connections for tightness and signs of wear. Repair or replace any damaged components as necessary.
Recommended Solutions
Based on the diagnostic findings:
  • Replace Faulty Sensors: If a speed sensor is found to be defective, replace it with a genuine BOMAG part to ensure compatibility and reliability.
  • Repair or Replace Proportional Valves: If issues are detected with the proportional valves, clean or replace them as needed to restore proper function.
  • Address Hydraulic Issues: If low pressure is identified, address the root cause, whether it's topping up fluid levels, replacing filters, or repairing pumps.
  • Repair Electrical Faults: Fix any damaged wiring or connectors to restore proper communication within the system.
Preventative Maintenance Tips
To prevent future issues with the travel system:
  • Regularly Inspect Sensors: Periodically check the speed sensors for cleanliness and proper operation.
  • Monitor Hydraulic Fluid Levels: Ensure that the hydraulic fluid is at the recommended level and is free from contaminants.
  • Maintain Electrical System: Regularly inspect the electrical system for signs of wear or damage, addressing any issues promptly.
Conclusion
A slow travel speed in the BOMAG BW226 DH-4 roller can stem from various issues within the hydrostatic drive system. By systematically diagnosing and addressing these potential causes, operators can restore the machine's performance, ensuring efficient and effective operation on the job site. Regular maintenance and timely repairs are key to prolonging the lifespan and reliability of the equipment.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Diagnosing and Fixing Exhaust Popping Sounds on a 48A MikePhua 0 10 6 hours ago
Last Post: MikePhua
  Dealing with Slow Lift and Overheating Hydraulic Oil in Bobcat 75 XT MikePhua 0 11 6 hours ago
Last Post: MikePhua
  Diagnosing low power in a 1999 Mack RD688S with E7 VMAC III system MikePhua 0 11 6 hours ago
Last Post: MikePhua
  Troubleshooting Travel Issues on a Case 340 Skid Steer MikePhua 0 10 6 hours ago
Last Post: MikePhua
  Diagnosing Control Lag in the Simon 32' All-Terrain Scissor Lift MikePhua 0 13 Yesterday, 03:20 PM
Last Post: MikePhua
  Diagnosing and Resolving Engine Knock in JCB 1550 Backhoes MikePhua 0 7 Yesterday, 03:06 PM
Last Post: MikePhua
  Diagnosing and Resolving Crankshaft Position Sensor Issues in Caterpillar 299D MikePhua 0 7 Yesterday, 02:33 PM
Last Post: MikePhua
  Diagnosing Brake Failure on the Komatsu D65E-7 Dozer MikePhua 0 10 Yesterday, 02:33 PM
Last Post: MikePhua
  Diagnosing Starter Failure on the International Harvester 100E MikePhua 0 3 10-18-2025, 08:05 PM
Last Post: MikePhua
  Diagnosing Hydraulic Failure on the CAT 951C Track Loader MikePhua 0 6 10-18-2025, 07:53 PM
Last Post: MikePhua
  Diagnosing Oil Contamination in a Deutz BF4M1012 Engine MikePhua 0 7 10-18-2025, 07:50 PM
Last Post: MikePhua
  Why Won’t the Volvo EC290 Shift into High Track Speed MikePhua 0 8 10-18-2025, 07:41 PM
Last Post: MikePhua
  Diagnosing Bucket Interference Circuit Failures on the Takeuchi TB153FR MikePhua 0 8 10-18-2025, 05:48 PM
Last Post: MikePhua
  Diagnosing Air Dump Valve Issues on a Modified 1988 Western Star Dump Truck MikePhua 0 10 10-18-2025, 05:43 PM
Last Post: MikePhua
  Diagnosing Low Charge Pressure on the Bobcat T200 MikePhua 0 3 10-18-2025, 05:39 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)