Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bobcat 310 Skid Steer Hydraulic Issues and Solutions
#1
The Bobcat 310, manufactured between 1976 and 1983, is a compact and versatile skid steer loader powered by a single-cylinder Kohler engine delivering about 15.4 horsepower. This lightweight machine, approximately 1980 pounds, is widely used for landscaping, material handling, and light construction. Its simple design and hydraulic system have made it reliable but also prone to specific hydraulic challenges over time.
Hydraulic System Overview
The Bobcat 310 features a belt-driven gear pump providing approximately 6.2 gallons per minute (GPM) at roughly 1500 psi. It uses a single-stage lift arm cylinder system powered through conventional hydraulic lines controlled by operator input. Auxiliary hydraulics may be limited but allow attachment operation like grapple buckets or augers where available.
Common Hydraulic Problems
Users report sluggish lifting, reduced bucket power under load, and delayed or weak hydraulic response. Typical issues stem from:
  • Pump Wear: The small, belt-driven gear pump may lose efficiency due to internal wear or contamination. This reduces hydraulic flow and pressure, limiting lift speed and power.
  • Hydraulic Fluid Contamination or Degradation: Dirty or old fluid compromises system efficiency and damages seals or cylinders. Oil viscosity out of specification leads to inconsistent hydraulic actuation.
  • Valve Sticking or Internal Leakage: Wear or debris in control valves may cause unpredictable cylinder response or loss of pressure.
  • Hydraulic Cylinder Seal Wear: Aging cylinder seals may leak internally or externally, reducing effective lift force.
  • Belt Tension and Drive Alignment: Loose or worn drive belts reduce pump input power.
Troubleshooting and Repair
  • Check Hydraulic Fluid Levels and Quality: Replace hydraulic oil if contaminated or degraded. Use manufacturer-recommended oil grade (often 10W-30 motor oil is specified for hydraulics in the 310).
  • Inspect and Adjust Drive Belt: Ensure proper tension and replace if cracked or worn.
  • Pump Condition: If sluggishness persists, pump rebuild kits are rare but possible. Consider professional assessment or replacement of the pump.
  • Valve Body Maintenance: Clean and inspect directional control valves; replace worn parts.
  • Cylinder Seal Replacement: Service cylinders showing leaks or loss of pressure.
Maintenance Recommendations
  • Regular hydraulic oil and filter changes to maintain fluid cleanliness and protect components.
  • Scheduled inspection of hydraulic hoses for cracks, leaks, or abrasions.
  • Timely belt inspection to avoid loss of pump drive.
  • Maintain controls and linkages to ensure precise hydraulic valve operation.
Operational Considerations
The Bobcat 310’s hydraulic design suits light-duty tasks, but users needing high auxiliary flow or heavy lifting capacity should consider larger or newer models with advanced hydraulics. Adapting attachments to horsepower and hydraulic capacity ensures better performance.
Real-World Insights
Operators have noted that after replacing hydraulic fluid and tightening the drive belt, the lifting speed improved noticeably. In one situation, removing accumulated sludge and debris from the valve body restored full responsiveness. Persistent hydraulic power loss often traced back to worn pump gears confirmed the pump as a critical maintenance item for this model.
Summary
The Bobcat 310’s hydraulic system is modest but functional, provided proper maintenance is followed. Hydraulic sluggishness and lift limitations frequently relate to fluid quality, belt condition, pump wear, or valve issues. Consistent preventive care and timely parts replacement ensure this classic skid steer loader remains efficient and reliable for light applications.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Cold Weather Starting Problems in the John Deere 270 Skid Steer MikePhua 0 11 Yesterday, 03:12 PM
Last Post: MikePhua
  Cone Crusher Performance Issues and Practical Troubleshooting MikePhua 0 10 Yesterday, 03:11 PM
Last Post: MikePhua
  Komatsu PC120-6 Hydraulic Power Loss After Warm-Up MikePhua 0 10 Yesterday, 03:08 PM
Last Post: MikePhua
  Bobcat 753 Hydraulic Lockup and Troubleshooting Strategy MikePhua 0 11 Yesterday, 02:59 PM
Last Post: MikePhua
  Hitachi EX120-2 Hydraulic Conversion Kit Installation MikePhua 0 10 Yesterday, 02:55 PM
Last Post: MikePhua
  Bobcat T770 Tilt Circuit Drift and Valve Troubleshooting MikePhua 0 12 Yesterday, 02:54 PM
Last Post: MikePhua
  Bobcat T190 Cab Heater System: Troubleshooting and Maintenance MikePhua 0 12 Yesterday, 02:38 PM
Last Post: MikePhua
  Diagnosing and Resolving Crankshaft Position Sensor Issues in Caterpillar 299D MikePhua 0 7 Yesterday, 02:33 PM
Last Post: MikePhua
  Fuel Starvation and Performance Issues in the Caterpillar IT28G MikePhua 0 6 Yesterday, 02:32 PM
Last Post: MikePhua
  Low Fuel Pressure in John Deere 331G Skid Steer Loaders MikePhua 0 9 Yesterday, 02:31 PM
Last Post: MikePhua
  Hydraulic Issues in Caterpillar D5N Track-Type Tractors MikePhua 0 7 Yesterday, 02:26 PM
Last Post: MikePhua
  T320 Lift Cylinder Bleed Off and Hydraulic Troubleshooting MikePhua 0 9 Yesterday, 02:22 PM
Last Post: MikePhua
  John Deere 450 Transmission Problems and Practical Solutions MikePhua 0 7 Yesterday, 02:20 PM
Last Post: MikePhua
  Hydraulic System Issues in New Holland Equipment MikePhua 0 5 Yesterday, 02:06 PM
Last Post: MikePhua
  Volvo 160C Screen Issues: Troubleshooting and Solutions MikePhua 0 4 Yesterday, 02:05 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: