08-26-2025, 06:51 PM
The Legacy of JLG Electric Scissor Lifts
JLG Industries, founded in 1969 in McConnellsburg, Pennsylvania, has long been a leader in aerial work platforms. Their electric scissor lifts, including the 2033e model, were designed for indoor maintenance, construction, and warehouse operations. With a platform height of 20 feet and a working height of 26 feet, the 2033e offered a compact footprint, zero emissions, and quiet operation—ideal for confined spaces.
By the early 2000s, JLG had sold tens of thousands of electric scissor lifts globally, with the 2033e becoming a staple in facility fleets. Its control system, however, relied on proprietary electronics that could be difficult to repair once components failed.
Diagnosing a Failed Controller Board
A technician working on a 2033e encountered a non-functional controller board, specifically the unit labeled 1600286. After disassembling the board, a visibly damaged transistor marked Q31 was discovered. The original part number was obscured due to heat damage, and JLG did not provide individual component specifications—only full board replacements.
To identify the failed part, the technician purchased a second-hand controller from an online marketplace. Remarkably, the same component had failed in the identical location, suggesting a recurring design flaw. By sheer luck, sunlight reflecting off the board revealed a partial marking: “VN31,” a legacy part from STMicroelectronics.
Component Analysis and Upgrade Strategy
The VN31 transistor, now discontinued, was known for limited internal protection and moderate efficiency. After comparing datasheets, the technician selected a modern replacement: the BTS441RS from Infineon Technologies. This component offered several advantages:
Replacing the CPU Without Reprogramming
Fortunately, the CPU used external memory storage, meaning a direct chip swap would retain all programming. After sourcing the exact part from a supplier in China, the technician enlisted help from a friend experienced in aerospace electronics—someone who had worked on the Mars Rover—to perform the delicate soldering.
Once installed, the board was reassembled and tested. The lift responded immediately: the flasher activated, the buzzer sounded, and the motor engaged. A final layer of conformal coating was applied to protect the board from future environmental damage.
Root Cause Theories and Preventive Measures
Two theories emerged regarding the repeated failure of the Q31 transistor:
The successful repair of the JLG 2033e controller board demonstrates the power of persistence, technical curiosity, and collaborative problem-solving. By identifying a flawed component, sourcing a modern replacement, and navigating the intricacies of embedded electronics, the technician not only revived a valuable machine but also created a roadmap for others facing similar challenges.
As aging fleets continue to rely on legacy equipment, stories like this remind us that with the right knowledge and a bit of ingenuity, even discontinued systems can be brought back to life.
JLG Industries, founded in 1969 in McConnellsburg, Pennsylvania, has long been a leader in aerial work platforms. Their electric scissor lifts, including the 2033e model, were designed for indoor maintenance, construction, and warehouse operations. With a platform height of 20 feet and a working height of 26 feet, the 2033e offered a compact footprint, zero emissions, and quiet operation—ideal for confined spaces.
By the early 2000s, JLG had sold tens of thousands of electric scissor lifts globally, with the 2033e becoming a staple in facility fleets. Its control system, however, relied on proprietary electronics that could be difficult to repair once components failed.
Diagnosing a Failed Controller Board
A technician working on a 2033e encountered a non-functional controller board, specifically the unit labeled 1600286. After disassembling the board, a visibly damaged transistor marked Q31 was discovered. The original part number was obscured due to heat damage, and JLG did not provide individual component specifications—only full board replacements.
To identify the failed part, the technician purchased a second-hand controller from an online marketplace. Remarkably, the same component had failed in the identical location, suggesting a recurring design flaw. By sheer luck, sunlight reflecting off the board revealed a partial marking: “VN31,” a legacy part from STMicroelectronics.
Component Analysis and Upgrade Strategy
The VN31 transistor, now discontinued, was known for limited internal protection and moderate efficiency. After comparing datasheets, the technician selected a modern replacement: the BTS441RS from Infineon Technologies. This component offered several advantages:
- Integrated Protection Diode: Prevents damage from back-driven electromagnetic force (EMF), often caused by contactor disengagement.
- Lower On-Resistance: Reduces heat generation, improving thermal performance even without a dedicated heat sink.
- Active Production Status: Ensures future availability and support.
Replacing the CPU Without Reprogramming
Fortunately, the CPU used external memory storage, meaning a direct chip swap would retain all programming. After sourcing the exact part from a supplier in China, the technician enlisted help from a friend experienced in aerospace electronics—someone who had worked on the Mars Rover—to perform the delicate soldering.
Once installed, the board was reassembled and tested. The lift responded immediately: the flasher activated, the buzzer sounded, and the motor engaged. A final layer of conformal coating was applied to protect the board from future environmental damage.
Root Cause Theories and Preventive Measures
Two theories emerged regarding the repeated failure of the Q31 transistor:
- Voltage Drop Stress: Operating the lift under low battery conditions may push the transistor outside its safe switching range, causing overheating and internal bridging.
- Incorrect Flasher Wiring: The flasher was wired directly to the first battery, bypassing the contactor. This caused continuous flashing when the emergency stop was disengaged, slowly draining one battery and creating a low-voltage state.
- Rewire the flasher to operate only when the contactor is engaged
- Monitor battery voltage and replace weak cells promptly
- Use upgraded transistors with better protection and thermal efficiency
- Apply conformal coating after any board-level repair
- Contactor: An electrically controlled switch used for high-current circuits, often found in lift control systems.
- Back-Driven EMF: A voltage spike caused when inductive loads like motors or contactors are suddenly disconnected.
- Conformal Coating: A protective chemical layer applied to circuit boards to shield against moisture, dust, and corrosion.
- Surface-Mount Processor: A chip soldered directly onto the board surface, requiring precision tools for removal and installation.
The successful repair of the JLG 2033e controller board demonstrates the power of persistence, technical curiosity, and collaborative problem-solving. By identifying a flawed component, sourcing a modern replacement, and navigating the intricacies of embedded electronics, the technician not only revived a valuable machine but also created a roadmap for others facing similar challenges.
As aging fleets continue to rely on legacy equipment, stories like this remind us that with the right knowledge and a bit of ingenuity, even discontinued systems can be brought back to life.
