08-24-2025, 09:34 PM
Size and Dimensions
The Caterpillar 328D LCR is known for its compact radius design, allowing excellent maneuverability in confined or urban job sites without sacrificing operational capabilities. Key dimensions include:
The Caterpillar 328D LCR stands out as a powerful, maneuverable hydraulic excavator designed for work in tight or restricted areas. Its compact size combined with strong digging capabilities and enhanced operator comfort make it a strong choice for urban construction, utility maintenance, and general excavation needs. Its dimensions, strength, and durability reflect Caterpillar’s legacy of building reliable, high-performance machinery for demanding job sites.
The Caterpillar 328D LCR is known for its compact radius design, allowing excellent maneuverability in confined or urban job sites without sacrificing operational capabilities. Key dimensions include:
- Shipping Height: Approximately 11 feet 1 inch to 11 feet 2 inches
- Shipping Length: About 32 feet 3 inches
- Transport Width: Ranges from 10 feet 6 inches to 11 feet 3 inches depending on track shoe size (600mm to 850mm)
- Tail Swing Radius: Approximately 6 feet 3 inches, notably smaller than many standard excavators, facilitating tight space operation
- Ground Clearance: About 1 foot 8 inches
- Track Gauge: Around 8 feet 6 inches
- Boom reach stands at 20 feet 2 inches with over 34 feet maximum reach at ground level, allowing for substantial coverage on worksites.
- Stick options vary between 8 feet 8 inches and 10 feet 6 inches, offering versatility for different excavation depths and applications.
- Maximum digging depth ranges from around 20 feet 11 inches to 22 feet 8 inches depending on boom and stick configuration.
- Outlet driven by a Cat C7 ACERT engine producing roughly 204 horsepower, ensuring robust yet efficient power delivery.
- Operating weight is approximately 87,850 pounds (around 39,830 kilograms), providing stability with the reduced tail swing design.
- Hydraulic flow rate sits near 62 gallons per minute, supporting smooth operation of attachments.
- The machine carries buckets around 1.2 cubic meters (1.57 cubic yards) in capacity.
- Maximum bucket digging force reaches approximately 45,000 pounds force (200 kN), suitable for tough digging jobs.
- Stick digging forces are around 29,000 to 34,000 pounds force, accommodating various soil conditions.
- Cabin height approximately 10 feet with ergonomic design, increasing operator comfort and visibility.
- Intuitive controls and optional technologies support operator efficiency and safety during precise excavation tasks.
- The reduced tail swing radius enables work near walls, urban sites, and densely packed environments, where standard excavators may struggle.
- Excellent for utility installation, landscaping, and site development with limited workspace.
- Reliable powertrain and hydraulic system deliver consistent performance across diverse conditions.
- LCR (Long Carriage Radius): Design format balancing compact rear swing with longer undercarriage base for stability.
- Boom: Main arm component used for reach and excavation.
- Stick: Secondary arm section adjusting reach and digging depth.
- Tail Swing Radius: The minimum clearance required at rear when excavator rotates.
- Digging Force: Measured power of bucket and stick to penetrate soil.
The Caterpillar 328D LCR stands out as a powerful, maneuverable hydraulic excavator designed for work in tight or restricted areas. Its compact size combined with strong digging capabilities and enhanced operator comfort make it a strong choice for urban construction, utility maintenance, and general excavation needs. Its dimensions, strength, and durability reflect Caterpillar’s legacy of building reliable, high-performance machinery for demanding job sites.
