Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Diagnosing Hydraulic Failure in the Bomag BW211D-3 Roller
#1
The BW211D-3 and Bomag’s Compaction Heritage
The Bomag BW211D-3 is a single-drum vibratory roller designed for soil compaction in heavy civil engineering projects. Manufactured by Bomag GmbH, a German company founded in 1957, the BW211D-3 belongs to the third generation of the BW211 series, which has been widely used in road construction, dam building, and mining operations. Bomag has sold tens of thousands of rollers globally, and its machines are known for their robust build, advanced vibration systems, and hydrostatic drive technology.
The BW211D-3 features a Deutz diesel engine, hydrostatic travel drive, and a dual-circuit hydraulic system that powers steering, travel, and vibration functions. Its operating weight exceeds 10 metric tons, and it delivers up to 25,000 kg of centrifugal force, making it suitable for compacting granular soils and crushed rock.
Hydraulic System Overview
The BW211D-3 uses a multi-pump hydraulic system:
  • A gear-type steering pump supplies pressure to the steering valve and also serves as the charge pump for the travel and vibration circuits.
  • Two axial piston pumps drive the travel motors and vibration exciter.
  • Hydraulic oil flows through a filter located downstream of the steering valve before entering the charge circuit.
This configuration allows for efficient power distribution but also introduces vulnerability: if the steering pump fails or becomes restricted, the entire machine may lose travel and vibration capability.
Terminology Explained
  • Charge Pressure: The baseline pressure that feeds the hydrostatic pumps, typically around 360 psi (25 bar).
  • Hydrostatic Drive: A closed-loop system where hydraulic pumps directly power motors without mechanical transmission.
  • Metal Flakes: Shiny debris found in hydraulic filters, often indicating internal wear or pump failure.
  • Relief Valve: A safety valve that limits maximum pressure in a hydraulic circuit.
Symptoms of Hydraulic Failure
Operators have reported the following issues with the BW211D-3:
  • Extremely stiff steering, even at moderate throttle
  • Intermittent travel in forward and reverse—machine moves a few feet, then stops
  • Pressure spikes followed by sudden drops in the travel circuit
  • Bright metal flakes found in the hydraulic filter
These symptoms suggest a failing steering pump, which also serves as the charge pump. Without adequate charge pressure, the hydrostatic pumps cannot maintain flow, leading to erratic travel behavior.
Field Diagnosis and Pressure Testing
One technician measured steering pressure at over 2,000 psi at half throttle, which is within spec. However, charge pressure at the filter was less than 100 psi at full throttle—far below the required 360 psi. This indicates either a failing pump or a restriction in the supply line.
Recommended diagnostic steps include:
  • Check charge pressure at full throttle with hydraulic oil at 50°C (120°F)
  • Inspect the filter for metallic debris, especially brass or aluminum
  • Verify that the filter is on the outlet side of the steering valve
  • Confirm that the relief valves are not stuck open
  • Examine suction lines for collapse or blockage
Field Anecdote and Practical Insight
A retired mechanic assisting a friend with a BW211D-3 discovered metal flakes in the filter and suspected pump failure. After pricing a replacement pump from Bomag at $850, he explored aftermarket options and found compatible units for half the cost. He noted that the machine sounded like it was starving for fluid, and pressure readings confirmed his suspicion.
Another technician emphasized the importance of checking the filter location. If the filter is on the pressure side, debris may not reach the main pumps. But if it’s on the return side, contamination can circulate and damage wear plates and rotating groups.
Preventive Maintenance and Long-Term Reliability
  • Replace hydraulic filters every 500 hours
  • Monitor charge pressure monthly using a test port
  • Flush the system if metal debris is found
  • Use OEM-grade hydraulic oil with proper viscosity
  • Inspect relief valves annually for sticking or leakage
Alternative Solutions and Cost-Saving Strategies
If the steering/charge pump fails, operators can:
  • Source rebuilt pumps from hydraulic specialists
  • Retrofit compatible gear pumps with similar flow and pressure ratings
  • Install inline magnetic filters to trap future debris
  • Upgrade to a higher-capacity cooling system to reduce thermal stress
In some cases, replacing the entire hydraulic assembly may be more economical than chasing individual failures. However, this depends on machine age, usage, and resale value.
Industry Trends and Support Challenges
Bomag’s dealer network varies by region, and access to service manuals can be limited for older models. Some technicians rely on dealer portals or direct contact with service reps to obtain hydraulic schematics. As more machines enter secondary markets, the need for open-access documentation grows.
In 2023, a regional contractor in Oklahoma retrofitted his BW211D-3 with a digital pressure monitoring system to track charge pressure in real time. This helped prevent future failures and reduced downtime by 40%.
Conclusion
Hydraulic failure in the Bomag BW211D-3 often stems from a compromised steering/charge pump. Symptoms like stiff steering, intermittent travel, and metal debris in filters point to low charge pressure and potential contamination. Through methodical testing, preventive maintenance, and strategic upgrades, operators can restore full functionality and extend the life of this powerful compaction machine. The BW211D-3 remains a testament to Bomag’s engineering legacy—provided its hydraulic heart is kept healthy.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Diagnosing Fluid Leaks from the Swing Drive on a CAT 345BL MikePhua 0 1 19 minutes ago
Last Post: MikePhua
  Resolving Hydraulic Remote Valve Issues on the CAT 65E Challenger MikePhua 0 5 3 hours ago
Last Post: MikePhua
  Dealing with Stuck Hydraulic Filters on the Takeuchi TL130: Causes and Solutions MikePhua 0 2 3 hours ago
Last Post: MikePhua
  Diagnosing Track Drive Problems on the John Deere 190E MikePhua 0 5 4 hours ago
Last Post: MikePhua
  Diagnosing Safety Lockout and Electrical Faults on the New Holland E18SR MikePhua 0 5 4 hours ago
Last Post: MikePhua
  Caterpillar D5C Hydraulic Tank Filler Cap: Importance, Maintenance, and Replacement MikePhua 0 5 4 hours ago
Last Post: MikePhua
  Diagnosing Sway Malfunction in the 1999 Terex SS1048 Telehandler MikePhua 0 3 4 hours ago
Last Post: MikePhua
  Hydraulic Pump Issues on CAT 3046T Engine: Diagnosis and Solutions MikePhua 0 9 6 hours ago
Last Post: MikePhua
  Diagnosing Speedometer Failure on a 1997 International 4700 MikePhua 0 8 6 hours ago
Last Post: MikePhua
  Cold Weather Lift Failure in the Caterpillar TH414C Telehandler MikePhua 0 7 6 hours ago
Last Post: MikePhua
  Diagnosing Hydraulic Drift on the 1995 Caterpillar 938F Loader MikePhua 0 7 6 hours ago
Last Post: MikePhua
  Diagnosing and Repairing Regulating Valve Leaks on the IH E200 Scraper MikePhua 0 5 6 hours ago
Last Post: MikePhua
  Diagnosing Clutch Plate Movement in the Caterpillar D6H Dozer MikePhua 0 10 7 hours ago
Last Post: MikePhua
  Komatsu PC300-7 Hydraulic Fault: Troubleshooting and Solutions MikePhua 0 10 7 hours ago
Last Post: MikePhua
  Bomag BW177 D-5 Vibrator Not Working: Troubleshooting and Solutions MikePhua 0 9 7 hours ago
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)