6 hours ago
Overview
The Lucas fuel injection pump, such as the Lucas type 700 or DPA models, is a widely utilized mechanical fuel delivery system found on medium to heavy-duty diesel engines, including machines like the Dresser TD7-H with Komatsu or Cummins engines. These pumps are complex devices that mechanically meter and pressurize fuel to the injectors, ensuring proper timing and delivery.
Common Symptoms of Pump Problems
An operator of a Dresser TD7-H experienced inability to accelerate beyond idle due to suspected timing or internal misalignment within the Lucas pump. The fuel control lever positions correctly but does not produce expected engine response, indicating internal pump issues or incorrect pump assembly.
Summary
Lucas fuel pumps are robust mechanical devices crucial for diesel engine performance but demand precise assembly and timing. Symptoms such as failure to reach commanded RPM and fuel lever not achieving full fuel delivery often point to timing or internal wear issues. Given their complexity, professional disassembly and calibration are recommended. Proper maintenance of associated fuel system components and adherence to manufacturer procedures ensure longevity and dependable engine operation.
The Lucas fuel injection pump, such as the Lucas type 700 or DPA models, is a widely utilized mechanical fuel delivery system found on medium to heavy-duty diesel engines, including machines like the Dresser TD7-H with Komatsu or Cummins engines. These pumps are complex devices that mechanically meter and pressurize fuel to the injectors, ensuring proper timing and delivery.
Common Symptoms of Pump Problems
- Engine fails to reach wide-open throttle (WOT) despite control lever being fully advanced.
- Idle may be erratic or unable to hold steady RPM.
- The fuel control lever moves to the high idle screw but engine speed remains near idle.
- Possible previous disassembly indicated by gasket or sealant residues.
- Timing Misalignment: The internal timing of the pump might be off due to incorrect spline alignment or improper installation, impacting fuel delivery and engine performance.
- Wear or Damage: Internal components such as the control rack, cam ring, or governor may be worn or damaged.
- Gasket or Sealant Issues: Use of inappropriate sealants like silicone can interfere with component movement or cause leaks.
- Calibration Errors: Pumps require precise calibration for fuel delivery rates matching engine specs.
- Since the Lucas pump contains internal self-bleeding features, fuel-air purging of the system occurs during operation but manual bleeding after filter changes is often necessary.
- Always inspect fuel filters, water separators, and the lift pump before suspecting the injection pump.
- Avoid opening the pump without expert knowledge; internal repairs usually require specialized tools and expertise.
- Removing and sending the fuel pump to a professional rebuild shop is generally recommended if internal misalignment or wear is suspected.
- Rebuilt or remanufactured pumps from reputable sources may offer more reliability than self-repaired units.
- Proper pump timing on re-installation is crucial and involves careful alignment of drive splines and timing marks following the manufacturer’s procedure.
- Fuel Injection Pump: Delivers metered fuel under high pressure to the engine’s injectors.
- Control Rack: Mechanical element controlling fuel quantity delivered.
- Cam Ring: Internal rotor component that controls fuel pressurization timing.
- Wide Open Throttle (WOT): The fully open throttle position for maximum engine performance.
- Self-Bleeding: Pump feature allowing air to purge from the system during normal operation.
An operator of a Dresser TD7-H experienced inability to accelerate beyond idle due to suspected timing or internal misalignment within the Lucas pump. The fuel control lever positions correctly but does not produce expected engine response, indicating internal pump issues or incorrect pump assembly.
Summary
Lucas fuel pumps are robust mechanical devices crucial for diesel engine performance but demand precise assembly and timing. Symptoms such as failure to reach commanded RPM and fuel lever not achieving full fuel delivery often point to timing or internal wear issues. Given their complexity, professional disassembly and calibration are recommended. Proper maintenance of associated fuel system components and adherence to manufacturer procedures ensure longevity and dependable engine operation.
