3 hours ago
Manufacturer Background
Kobelco Construction Machinery Co., Ltd., based in Japan, is a globally recognized manufacturer of hydraulic excavators and heavy equipment. The SK300LC line, especially the Mark IV series, reflects Kobelco’s commitment to robust engineering, fuel efficiency, and operator-focused design, widely used in mining, construction, and heavy civil projects.
Model Description and Development
The SK300LC Mark IV is an evolution of earlier SK300LC models, offering technological enhancements targeting fuel economy, hydraulic power, and emissions compliance. It complies with stringent US EPA Tier IV final regulations by integrating advanced engine and exhaust after-treatment technologies such as Selective Catalytic Reduction (SCR) and Diesel Particulate Filters (DPF).
Technical Specifications
The SK300LC Mark IV’s combination of high hydraulic flow and power provides class-leading digging forces (bucket digging force ~46,800 lbs with power boost). This machine balances fuel efficiency with heavy-duty operation through sophisticated hydraulic circuit design and intelligent engine management.
Its enhanced durability includes thicker boom foot cross sections and improved hydraulic line layouts reducing pressure loss and turbulence for more effective fluid flow.
Maintenance and Serviceability
Carefully designed access to hydraulic and engine systems aids routine maintenance. Monitoring features integrated into the machine’s operating system provide diagnostic feedback optimizing service intervals and minimizing downtime.
Industry Anecdote
Operators at large infrastructure projects praise the SK300LC Mark IV for its blend of power and fuel economy, enabling longer shifts with less refueling and reduced maintenance, directly impacting project productivity and operational cost saving.
Terminology
The Kobelco SK300LC Mark IV excavator exemplifies next-generation heavy equipment with environmentally compliant engines, powerful hydraulic systems, and innovative fuel-saving technologies. Its adaptability through arm options and advanced operational modes suits a wide range of demanding applications, combining productivity with sustainability for modern construction and mining industries.
Kobelco Construction Machinery Co., Ltd., based in Japan, is a globally recognized manufacturer of hydraulic excavators and heavy equipment. The SK300LC line, especially the Mark IV series, reflects Kobelco’s commitment to robust engineering, fuel efficiency, and operator-focused design, widely used in mining, construction, and heavy civil projects.
Model Description and Development
The SK300LC Mark IV is an evolution of earlier SK300LC models, offering technological enhancements targeting fuel economy, hydraulic power, and emissions compliance. It complies with stringent US EPA Tier IV final regulations by integrating advanced engine and exhaust after-treatment technologies such as Selective Catalytic Reduction (SCR) and Diesel Particulate Filters (DPF).
Technical Specifications
- Engine: Equipped with an Isuzu 6HK1 turbocharged 6-cylinder diesel engine delivering around 282 horsepower (210 kW), with maximum torque near 797 lb-ft (1080 Nm) at 1600 rpm.
- Operating Weight: Approximately 69,200 pounds (31,400 kg), suited to heavy digging and lifting tasks.
- Hydraulic System: Features two main variable displacement pumps delivering a combined flow of 130 gallons per minute to provide powerful and precise implement operation. Additionally, a gear pump supplies 5.5 gallons per minute for pilot functions.
- Travel Speed: Approximately 3.2 mph (5.2 kph) forward, 1.9 mph (3.1 kph) reverse, balancing transport speed with site maneuverability.
- Drawbar Pulling Force: Rated at about 62,700 lbf (279 kN), enabling excellent traction for rough terrain and heavy loads.
- Arm Options: Standard arm length around 10.2 feet (3.1 m) with a long arm alternative at 13.1 feet (4.0 m) to extend digging reach.
- Bucket Capacity: Varies with chosen attachments, supporting class-leading digging volume optimized through efficient hydraulic flow and power boosting features.
- Dimensions: Approximate width 11 feet 6 inches, height 11 feet 2 inches, and length extending near 36 feet 7 inches depending on configuration.
- Power Boost: Provides an instant power increase of 10% without time limits, useful during demanding digging or lifting cycles.
- Independent Travel: Allocates dedicated hydraulic pump output to travel and attachment circuits, allowing simultaneous smooth movement and operation of the boom and bucket—ideal for site mobility while handling heavy loads.
- Boom to Arm Regeneration: Hydraulic system captures energy from boom movement to assist arm motion, reducing power consumption and improving fuel efficiency.
- ECO-mode: Optimizes engine and hydraulic component operation for fuel savings during less demanding tasks.
- Auto Idle Stop (AIS): Automatically shuts down engine after 60 seconds of inactivity to reduce idling fuel consumption and emissions.
- SCR System: Utilizes selective catalytic reduction to minimize nitrogen oxide (NOx) emissions complying with Tier IV final standards.
The SK300LC Mark IV’s combination of high hydraulic flow and power provides class-leading digging forces (bucket digging force ~46,800 lbs with power boost). This machine balances fuel efficiency with heavy-duty operation through sophisticated hydraulic circuit design and intelligent engine management.
Its enhanced durability includes thicker boom foot cross sections and improved hydraulic line layouts reducing pressure loss and turbulence for more effective fluid flow.
Maintenance and Serviceability
Carefully designed access to hydraulic and engine systems aids routine maintenance. Monitoring features integrated into the machine’s operating system provide diagnostic feedback optimizing service intervals and minimizing downtime.
Industry Anecdote
Operators at large infrastructure projects praise the SK300LC Mark IV for its blend of power and fuel economy, enabling longer shifts with less refueling and reduced maintenance, directly impacting project productivity and operational cost saving.
Terminology
- Selective Catalytic Reduction (SCR): An advanced emissions control technology converting harmful NOx gases into harmless nitrogen and water.
- Variable Displacement Pump: A hydraulic pump whose output flow varies based on system demand, improving efficiency.
- Power Boost: A system temporarily increasing engine/hydraulic power for demanding operations.
- Drawbar Pull: The pulling force the machine can exert to move itself or attached implements.
- Hydraulic Regeneration: Using energy from hydraulic movements to assist other hydraulic functions, saving power.
The Kobelco SK300LC Mark IV excavator exemplifies next-generation heavy equipment with environmentally compliant engines, powerful hydraulic systems, and innovative fuel-saving technologies. Its adaptability through arm options and advanced operational modes suits a wide range of demanding applications, combining productivity with sustainability for modern construction and mining industries.
