Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bobcat 15C Auger Performance Issues
#1
Problem Description
The Bobcat 15C auger attachment motor often spins freely and functions well when tested off the ground, but bogs down and fails to dig effectively once lowered into the soil. This problem hinders its ability to create proper holes and limits job site productivity.
Technical Specifications
  • The Bobcat 15C auger features a planetary drive system delivering high torque suited for moderate digging applications.
  • Weight without bit is around 205 lbs; overall length approximately 37 inches.
  • Digging depth can reach up to 62 inches without extensions.
  • The auger is designed for use with Bobcat compact loaders, excavators, and other compatible carriers.
  • It offers a unique knuckle joint allowing vertical hole digging even on uneven terrain.
  • Multiple bit types and tooth configurations are available to match varying soil conditions including rock, shale, clay, and frost.
Common Causes of Bogging
  • Insufficient Hydraulic Flow or Pressure: When the auger is under load in the ground, the hydraulic motor may not receive enough flow, causing torque loss and bogging.
  • Hydraulic Motor Wear or Damage: Internal wear such as bearing failure or seal leaks reduces motor efficiency.
  • Excessive Down Pressure: Applying too much downward force beyond the auger’s torque capacity leads to stalls.
  • Bit Size and Soil Condition Mismatch: Using an over-sized bit on tough soil or rocky conditions overwhelms the motor torque.
  • Carrier Hydraulic System Limitations: The host machine’s hydraulic output might be insufficient or compromised, especially if filter or fluid issues exist.
Troubleshooting Recommendations
  • Inspect hydraulic hoses, fittings, and fluid condition to ensure optimal flow and pressure.
  • Verify carrier’s hydraulic specifications meet or exceed the auger’s recommended pressure and flow.
  • Match auger bit size and type to ground conditions to avoid overloading.
  • Reduce downward pressure during penetration to prevent motor stall.
  • Check auger motor components for wear, leaks, or failure.
  • Routine maintenance and filter replacement help maintain hydraulic responsiveness.
Terminology
  • Planetary Drive: Gear system that increases torque and reduces speed for heavy-duty rotation.
  • Hydraulic Motor: Converts hydraulic energy into mechanical rotational force.
  • Knuckle Joint: A pivoting joint allowing flexible auger positioning on uneven surfaces.
  • Down Pressure: The force applied downward on the auger to aid in penetration.
  • Hydraulic Flow: The volume of hydraulic fluid delivered per unit time, vital for motor performance.
Real-World Insight
Operators using the Bobcat 15C auger often find that light to moderate bits (up to 12 inches) work well, while larger or heavily tooth-configured bits risk motor bogging in tough soil. Adjusting hydraulic parameters on the host machine and guided bit selection optimize performance.
Conclusion
Bogging of the Bobcat 15C auger under load typically signals hydraulic flow insufficiency, motor wear, or overloading due to unsuitable bit choice or excessive pressure. Careful matching of machine hydraulic capacity, auger configuration, and operating technique ensures efficient digging with minimal stalling or motor strain, extending the life of the auger attachment and improving productivity.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Excavator Slewing Bearings: Importance, Issues, and Maintenance MikePhua 0 5 Yesterday, 06:57 PM
Last Post: MikePhua
  Sheave Bushing: Importance, Issues, and Maintenance MikePhua 0 6 Yesterday, 06:04 PM
Last Post: MikePhua
  Repowering a Bobcat 1835: A Guide to Engine Upgrades MikePhua 0 5 Yesterday, 05:23 PM
Last Post: MikePhua
  PA30B Auger Adapter Plate: Importance, Design, and Specifications MikePhua 0 4 Yesterday, 04:46 PM
Last Post: MikePhua
  CAT 966H Auxiliary Valve: Understanding the Components and Issues MikePhua 0 2 Yesterday, 04:25 PM
Last Post: MikePhua
  Choosing Replacement Tires for the Bobcat A300 MikePhua 0 4 Yesterday, 04:16 PM
Last Post: MikePhua
  Choosing Tracks for the Bobcat 334 Mini Excavator MikePhua 0 7 Yesterday, 04:12 PM
Last Post: MikePhua
  Perkins 1004-4 Engine in the JCB 504B: Performance, Challenges, and Solutions MikePhua 0 8 Yesterday, 03:01 PM
Last Post: MikePhua
  4-in-1 Bucket Geometry and Its Impact on Performance MikePhua 0 8 10-20-2025, 01:56 PM
Last Post: MikePhua
  Understanding the Caterpillar 627G Auger System MikePhua 0 10 10-18-2025, 05:40 PM
Last Post: MikePhua
  D7 3T Track Conversion: Enhancing Performance with Customized Tracks MikePhua 0 23 10-16-2025, 11:56 PM
Last Post: MikePhua
  Improving Hydraulic Hose Management on Bobcat Loaders MikePhua 0 22 10-16-2025, 10:31 PM
Last Post: MikePhua
  Big Engine 27s: Understanding the Development, Performance, and Applications MikePhua 0 27 10-16-2025, 10:19 PM
Last Post: MikePhua
  Bobcat 331D Hydraulic System: Understanding the Rexroth-Uchida AP2D12LV1RS7-966-1 Pump MikePhua 0 26 10-15-2025, 12:17 PM
Last Post: MikePhua
  Zexel Diesel Pump Performance and Adjustment MikePhua 0 25 10-14-2025, 02:49 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)