Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Understanding TE Pitch and Its Importance in Heavy Equipment Tracks
#1
Definition of TE Pitch
The term "TE Pitch" refers to the distance between the drive lugs or teeth on a tracked heavy equipment machine’s undercarriage. It is measured from the center of one lug to the center of the next, typically in millimeters. This dimension is crucial for selecting compatible rubber tracks or metal track links.
Short Pitch vs. Long Pitch Tracks
  • Short Pitch Tracks have a smaller distance between drive lugs. This means the track engages every sprocket tooth, resulting in smoother operation, reduced vibration, and less wear on the undercarriage components. Short pitch rubber tracks enhance ride comfort and improve machine longevity.
  • Long Pitch Tracks have drive lugs spaced further apart, engaging every other sprocket tooth. While this design is less smooth and increases vibration and wear, it can perform better in sandy or soft soil conditions by reducing soil packing.
Measuring TE Pitch
Accurate measurement involves:
  1. Measuring from the center of one lug tooth to the center of the adjacent lug tooth, not just the gap.
  2. Counting the number of links (teeth) around the track circumference to verify track size and fit.
  3. Considering the guide system (Inside Guide or Outside Guide) which affects how the track interfaces with bottom rollers and idlers, including measuring inner or outer bottom widths accordingly.
Implications for Track Compatibility and Machine Performance
Choosing the correct pitch is essential because the sprocket and track must match precisely to prevent skipping, increased wear, or track slippage. Tracks with the wrong pitch can lead to premature undercarriage failure and decreased operational efficiency.
Terminology Explained
  • Drive Lug: The raised tooth or protrusion on a rubber or metal track that engages the sprocket.
  • Sprocket: A toothed wheel that meshes with the track drive lugs, transferring power to move the machine.
  • Guide System: The track system mechanism that keeps the track aligned via rollers or idlers either inside or outside the track links.
  • Undercarriage: The tracked part of heavy equipment including tracks, rollers, idlers, and sprockets.
Best Practices and Tips
  • Always verify pitch and track dimensions before ordering replacements to ensure compatibility and optimal performance.
  • Short pitch tracks are generally preferred for most applications due to their smoother operation and longer life cycle.
  • Consider ground and soil conditions when choosing between long and short pitch; long pitch may offer advantages in specific challenging terrains.
  • Work closely with manufacturers or specialists for precise measurements and recommendations.
Conclusion
TE pitch is a fundamental specification that influences track selection, machine performance, and maintenance intervals. Understanding the difference between short and long pitch tracks guides operators and service professionals in selecting the right undercarriage components to extend equipment life and maximize operational efficiency.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Using Citgo Tractor Hydraulic Fluid in Vintage Equipment MikePhua 0 8 1 hour ago
Last Post: MikePhua
  Excavator Bucket Parts and Their Importance MikePhua 0 10 2 hours ago
Last Post: MikePhua
  Understanding the Galion 118 Cutting Edge: A Unique Design MikePhua 0 8 2 hours ago
Last Post: MikePhua
  Where Do You Source Affordable Heavy Equipment Tires MikePhua 0 14 Yesterday, 08:09 PM
Last Post: MikePhua
  Understanding the Filter Screener on the JCB 1550 MikePhua 0 10 Yesterday, 07:59 PM
Last Post: MikePhua
  Adapting Long Forks to a Loader Bucket for Heavy-Duty Use MikePhua 0 13 Yesterday, 07:52 PM
Last Post: MikePhua
  Understanding Swing Cylinders in Heavy Equipment MikePhua 0 7 Yesterday, 07:41 PM
Last Post: MikePhua
  Choosing Between Crane Pads and Grouser Pads for Heavy Equipment MikePhua 0 4 Yesterday, 05:41 PM
Last Post: MikePhua
  Understanding the Caterpillar 627G Auger System MikePhua 0 5 Yesterday, 05:40 PM
Last Post: MikePhua
  Understanding Kato IHI Parts and Information MikePhua 0 8 Yesterday, 05:25 PM
Last Post: MikePhua
  Understanding the Undercarriage of the PC360: Maintenance and Considerations MikePhua 0 7 Yesterday, 05:24 PM
Last Post: MikePhua
  Choosing the Right Attachments for Your Heavy Equipment MikePhua 0 6 Yesterday, 04:46 PM
Last Post: MikePhua
  Understanding Part Numbers for Heavy Equipment Gauges MikePhua 0 12 Yesterday, 02:47 PM
Last Post: MikePhua
  Understanding Yarder Rigging Systems and Line Functions MikePhua 0 11 Yesterday, 02:08 PM
Last Post: MikePhua
  Understanding the Importance of Liner Installation for the Caterpillar 3406A Engine MikePhua 0 11 Yesterday, 02:06 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: