Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Caterpillar Haul Trucks with Bottom Dumps
#1
Overview
Caterpillar haul trucks equipped with bottom dump bodies provide efficient solutions for mining, quarrying, and heavy construction projects. These trucks are designed to transport large volumes of material and unload quickly by releasing the payload through gates in the bottom of the dump body, facilitating controlled and uniform material placement.
Design and Features
  • Caterpillar bottom dump trucks feature robust steel bodies with reinforced floors and sidewalls designed to handle abrasive materials.
  • Bottom dump bodies typically have several plates varying in thickness: floor plates around 0.63 inches thick, front plates 0.35 inches, and side plates approximately 0.31 inches. This thickness varies depending on selection and application to optimize durability versus weight.
  • Dumping mechanisms utilize twin two-stage hydraulic cylinders with snubbing valves to control material release speed and avoid excessive impact or truck instability.
  • The total cycle time for dumping (raise, lower, power down) ranges around 44 seconds, ensuring rapid and efficient operation during load cycles.
  • Truck chassis and suspension are built for high load capacities, with self-contained nitrogen/oil suspension cylinders that accommodate rough terrain while maintaining stability.
  • Rear axle oscillation of approximately ±5 degrees further improves traction and rider comfort on uneven surfaces.
Performance Specifications
  • Payload capacity varies widely among models, from mid-range 70+ tons to over 300 tons for ultra-class haul trucks.
  • Engines are high horsepower Cat diesel models ranging from 775 horsepower up to over 3,500 horsepower in largest mining haulers, featuring electronic fuel injection for efficiency and emissions control.
  • Fuel tanks are large, often exceeding 1,000 gallons to support extended operations in remote mining sites.
  • Cooling and hydraulic systems are designed with large capacities (hundreds of gallons) to maintain machine temperature and system pressure during heavy cycles.
Operation and Safety
  • Bottom dump trucks provide smooth material discharge minimizing ground disturbance and allowing precise material layering. This is particularly important in spreading loads across haul road surfaces or stockpiles.
  • Operators benefit from sound-suppressed cabs with ROPS/FOPS safety features, climate control, and ergonomic controls reducing fatigue and enhancing productivity.
  • Advanced braking systems include multiple hydraulically released, spring-applied wet disc brakes providing reliable stopping power under full loads.
  • Integrated monitoring and control systems help optimize truck performance and maintenance scheduling.
Glossary
  • Bottom Dump Truck: A haul truck equipped with a dump body that unloads material through gates in the bottom, rather than tipping the entire body upward.
  • Snubbing Valve: A hydraulic control valve that slows the movement of a hydraulic cylinder to prevent sudden or harsh motion.
  • ROPS/FOPS: Safety structures protecting operators during rollover or falling object events.
  • Axle Oscillation: Side-to-side movement in truck axles enhancing traction on uneven terrain.
  • Cycle Time: The total time required to complete one dump operation including raising, lowering, and power down phases.
Summary
Caterpillar bottom dump haul trucks are engineered for efficiency, durability, and operator safety in heavy mining and quarrying environments. Their specialized dump bodies allow controlled unloading, reducing site disturbance and improving material placement accuracy. With powerful engines, robust hydraulic systems, and advanced operator amenities, these trucks remain industry standards for high-volume material transport across challenging terrains.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Knuckle Boom Trucks for Lifting and Transport Applications MikePhua 0 9 1 hour ago
Last Post: MikePhua
  Can a Single Axle Truck Safely Haul a CAT 953 on a 20-Ton Trailer MikePhua 0 12 6 hours ago
Last Post: MikePhua
  Choosing the Right Replacement for Volvo A40F Haul Trucks MikePhua 0 12 7 hours ago
Last Post: MikePhua
  Caterpillar 902 Compact Wheel Loader Overview MikePhua 0 4 7 hours ago
Last Post: MikePhua
  Trucks in Action at a Maryland Job Site MikePhua 0 8 8 hours ago
Last Post: MikePhua
  Will Caterpillar Ever Build a D12 Dozer MikePhua 0 6 9 hours ago
Last Post: MikePhua
  Caterpillar 416C: An In-Depth Overview of a Versatile Backhoe Loader MikePhua 0 6 9 hours ago
Last Post: MikePhua
  Hydraulic Oil Selection and System Cleaning for the Caterpillar 955L Track Loader MikePhua 0 10 10 hours ago
Last Post: MikePhua
  Caterpillar 955L: Exploring Its Potential as a Parts Machine MikePhua 0 4 10 hours ago
Last Post: MikePhua
  Highway Log Trucks: Key Features, Performance, and Maintenance MikePhua 0 4 10 hours ago
Last Post: MikePhua
  Is a Stainless Steel Dump Body Worth It for Smaller Trucks MikePhua 0 7 10 hours ago
Last Post: MikePhua
  Finding Equivalent Machines: Shantui vs. Caterpillar and Other Major Brands MikePhua 0 6 10 hours ago
Last Post: MikePhua
  Caterpillar D5G: A Comprehensive Overview MikePhua 0 6 11 hours ago
Last Post: MikePhua
  Caterpillar 302.5: A Compact Excavator for Tight Spaces MikePhua 0 10 10-20-2025, 02:02 PM
Last Post: MikePhua
  Caterpillar 955S: Bringing the Classic Loader Back to Life MikePhua 0 11 10-20-2025, 01:58 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)