Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Drott 40 Track System Issues and Troubleshooting
#1
The Drott 40 crawler excavator is a classic machine cherished for its durability but often faces challenges related to track system performance. One common and frustrating issue is uneven track engagement or the machine failing to track straight, which can hinder productivity and operator control.
Typical Track Problems
  • One track may not engage properly, causing the machine to veer or lose traction on one side.
  • Uneven wear or damage in travel motors, idler wheels, or valve systems can cause inconsistent track speeds.
  • Hydraulic pressure imbalances between the two travel motors are a frequent root cause.
  • Control valves or the swivel joint can develop faults, disrupting hydraulic flow to the tracks.
  • Mechanical issues like stuck valves, broken piston rings in travel motors, or worn idler wheel bearings contribute to poor track performance.
Diagnostic Approach
  • Swap hydraulic lines at the travel motors to determine if the problem shifts sides—if it does, the issue likely lies in the pump or supply lines; if not, it’s a motor or undercarriage problem.
  • Inspect and test travel motors using K-strain or pressure tests to check internal motor health.
  • Check the condition and smooth operation of the swivel joint, which allows hydraulic flow through the rotating upper structure.
  • Verify control valve spool condition; while commonly not the primary cause, worn valve bodies can cause leaks.
  • Couple travel motor lines to ensure equal flow in one direction and observe track behavior, acknowledging this disables turning.
Technical Terms Explained
  • Swivel Joint: A hydraulic rotary union allowing fluid flow to the rotating upper structure without hose twisting.
  • Travel Motor: Hydraulic motor driving the tracks independently on each side.
  • K-Strain Test: A diagnostic test on travel motors checking internal leakage or seal wear.
  • Control Valve Spool: A sliding component directing hydraulic fluid flow within valves.
  • Idler Wheel: A leading or trailing wheel in the undercarriage supporting and guiding the track.
  • Hydraulic Pump: Supplies pressurized fluid to the travel motors.
Solutions and Considerations
  • Confirm whether the pump produces even flow; imbalances usually necessitate pump repair or replacement.
  • Repair or replace faulty travel motors, paying attention to seals and internal components.
  • Maintain or overhaul the swivel joint to ensure leak-free fluid delivery.
  • Consider installing control systems to couple motor lines for straight travel during longer moves, accepting limited steering.
  • Regular maintenance of hydraulic systems and undercarriage parts extends machine life and reliability.
Practical Insight
Operators note that perfect straight-line tracking is rare in used or heavily used excavators due to natural component wear and manufacturing tolerances. Machines with over 1000 hours commonly show some drift. A balanced approach accepts minor imperfections but addresses significant faults impacting work quality.
Summary
Drott 40 track issues typically stem from hydraulic flow inconsistencies caused by pump, motor, valve, or swivel joint faults. Systematic swapping and testing isolate the problem source efficiently. Repairing or replacing compromised components restores reliable tracking performance, ensuring safer, more productive machine operation. Understanding the hydraulic and mechanical dynamics is key to managing this common challenge in classic crawler excavators.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Restoring the Air Intake and Exhaust System on an International 3400A MikePhua 0 9 5 hours ago
Last Post: MikePhua
  Troubleshooting D6R XL II Fault Codes MikePhua 0 9 5 hours ago
Last Post: MikePhua
  John Deere 244E Transmission Problems: Troubleshooting and Solutions MikePhua 0 9 5 hours ago
Last Post: MikePhua
  Case 1845C Skid Steer Tire Alignment Issues MikePhua 0 7 5 hours ago
Last Post: MikePhua
  Troubleshooting Low Boost in CAT D5H Bulldozer MikePhua 0 11 5 hours ago
Last Post: MikePhua
  Terramite T5C Shifting Issues and Solutions MikePhua 0 8 5 hours ago
Last Post: MikePhua
  CAT D6C Torque Converter Inlet Pressure Issues MikePhua 0 9 5 hours ago
Last Post: MikePhua
  How to Reseat a Derailed Track on a Bobcat T250 MikePhua 0 5 6 hours ago
Last Post: MikePhua
  Takeuchi T015 Control Pattern Switch: Troubleshooting and Solutions MikePhua 0 9 6 hours ago
Last Post: MikePhua
  CAT 350L Excavator Troubleshooting and Solutions MikePhua 0 10 6 hours ago
Last Post: MikePhua
  Troubleshooting Electrical and Hydraulic Issues on a Genie Z-45/25 Boom Lift MikePhua 0 9 6 hours ago
Last Post: MikePhua
  Yanmar B15 Mini Excavator: Common Issues and Troubleshooting MikePhua 0 9 6 hours ago
Last Post: MikePhua
  Diagnosing Slow Travel Issues on Case 750K and New Holland D75 Dozers MikePhua 0 6 6 hours ago
Last Post: MikePhua
  Troubleshooting Forward and Reverse Gear Issues in a 1997 JCB Backhoe MikePhua 0 10 6 hours ago
Last Post: MikePhua
  Replacing a Hydraulic Pump: A Guide to Identifying and Addressing Common Issues MikePhua 0 8 10 hours ago
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)