Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Diagnosing and Resolving Jerky Steering in Bobcat 873F Skid Steer Loaders
#1
Introduction
The Bobcat 873F Skid Steer Loader is renowned for its versatility and power, making it a staple in various construction and landscaping projects. However, operators have reported issues with jerky or erratic steering, especially during low-speed maneuvers. Understanding the underlying causes and implementing appropriate solutions is crucial for maintaining optimal performance and safety.
Common Causes of Jerky Steering
  1. Worn or Loose Linkage Components
    The steering system of the 873F relies on a series of linkages that connect the steering levers to the hydrostatic pumps. Over time, components such as the pintle arm, which connects to the pump control shaft, can become loose or worn. This wear can lead to delayed or erratic steering responses, often described as "bucking" or "jerking" movements.
  2. Hydraulic System Issues
    The 873F's hydrostatic drive system is sensitive to hydraulic fluid quality and pressure. Low or contaminated hydraulic fluid can cause erratic steering behavior. Additionally, issues with the steering servos or the main pump can lead to inconsistent steering responses.
  3. Steering Control Valve Problems
    The steering control valve regulates the flow of hydraulic fluid to the steering cylinders. If this valve becomes clogged or damaged, it can result in jerky or unresponsive steering. Regular maintenance and inspection of the steering control valve are essential to ensure smooth operation.
Diagnostic Steps
  1. Inspect Linkage Components
    Begin by raising the loader's cab and inspecting the steering linkages for any signs of wear or looseness. Pay particular attention to the pintle arm and its connection to the pump control shaft. If any components are found to be worn or loose, they should be replaced or tightened as necessary.
  2. Check Hydraulic Fluid Levels and Quality
    Ensure that the hydraulic fluid is at the proper level and is free from contaminants. If the fluid appears dirty or has a burnt smell, it should be replaced. Also, check for any leaks in the hydraulic system that could affect steering performance.
  3. Test Steering Control Valve
    Operate the steering levers and observe the response of the steering cylinders. If the steering is unresponsive or jerky, the steering control valve may need to be cleaned or replaced.
Maintenance Tips
  • Regularly Inspect Linkages
    Routine inspections of the steering linkages can help identify wear or looseness before they lead to steering issues. Replace any worn components promptly to maintain smooth steering.
  • Use High-Quality Hydraulic Fluid
    Always use the manufacturer's recommended hydraulic fluid and change it at the intervals specified in the owner's manual. This practice helps prevent contamination and ensures optimal hydraulic system performance.
  • Keep the Steering Control Valve Clean
    Regularly clean the steering control valve to prevent debris buildup that can affect steering performance. If the valve becomes damaged, replace it promptly to avoid steering issues.
Case Study: Addressing Jerky Steering in a Bobcat 873F
In a real-world scenario, a Bobcat 873F owner reported experiencing jerky steering movements when attempting to creep forward. Upon inspection, the pintle arm was found to be loose, causing delayed steering responses. After tightening the pintle arm and replacing worn linkage components, the steering became smooth and responsive, resolving the issue.
Conclusion
Jerky steering in the Bobcat 873F Skid Steer Loader can stem from various issues, including worn linkage components, hydraulic system problems, and steering control valve malfunctions. By conducting thorough diagnostics and adhering to regular maintenance practices, operators can ensure smooth and responsive steering, enhancing safety and efficiency on the job site.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Diagnosing hydraulic quick attach failure on the Takeuchi TL230 MikePhua 0 9 4 hours ago
Last Post: MikePhua
  Diagnosing and Fixing Exhaust Popping Sounds on a 48A MikePhua 0 11 Yesterday, 02:33 PM
Last Post: MikePhua
  Dealing with Slow Lift and Overheating Hydraulic Oil in Bobcat 75 XT MikePhua 0 11 Yesterday, 02:30 PM
Last Post: MikePhua
  Diagnosing low power in a 1999 Mack RD688S with E7 VMAC III system MikePhua 0 11 Yesterday, 02:25 PM
Last Post: MikePhua
  Troubleshooting Travel Issues on a Case 340 Skid Steer MikePhua 0 10 Yesterday, 02:17 PM
Last Post: MikePhua
  Bobcat 721 Hydraulic Problems MikePhua 0 5 Yesterday, 02:06 PM
Last Post: MikePhua
  Bobcat S-250 Drive Motor Carrier Seals Leaking into Chaincase MikePhua 0 10 Yesterday, 01:56 PM
Last Post: MikePhua
  Bobcat 753G main belt tension failure and repair strategies MikePhua 0 8 Yesterday, 01:55 PM
Last Post: MikePhua
  Diagnosing Control Lag in the Simon 32' All-Terrain Scissor Lift MikePhua 0 13 10-19-2025, 03:20 PM
Last Post: MikePhua
  Cold Weather Starting Problems in the John Deere 270 Skid Steer MikePhua 0 11 10-19-2025, 03:12 PM
Last Post: MikePhua
  Diagnosing and Resolving Engine Knock in JCB 1550 Backhoes MikePhua 0 7 10-19-2025, 03:06 PM
Last Post: MikePhua
  ChatGPT said: Caterpillar 953A Steering Troubleshooting MikePhua 0 9 10-19-2025, 03:04 PM
Last Post: MikePhua
  Bobcat 753 Hydraulic Lockup and Troubleshooting Strategy MikePhua 0 11 10-19-2025, 02:59 PM
Last Post: MikePhua
  Bobcat T770 Tilt Circuit Drift and Valve Troubleshooting MikePhua 0 12 10-19-2025, 02:54 PM
Last Post: MikePhua
  Bobcat T190 Cab Heater System: Troubleshooting and Maintenance MikePhua 0 12 10-19-2025, 02:38 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)