4 hours ago
Understanding Moly Grease and NLGI Ratings
Grease selection is a critical factor in equipment longevity, especially for machines operating under heavy loads, frequent articulation, and variable environmental conditions. Schaeffer’s Perma Moly Grease NLGI2 is a lithium complex-based lubricant fortified with molybdenum disulfide (MoS₂), designed for high-pressure applications and extended service intervals.
The NLGI (National Lubricating Grease Institute) grade indicates the grease’s consistency. NLGI2 is the most commonly used grade, comparable in texture to peanut butter, and suitable for general-purpose applications across a wide temperature range.
Terminology Clarification
- Molybdenum Disulfide (MoS₂): A solid lubricant additive that forms a protective layer under pressure, reducing metal-to-metal contact.
- Lithium Complex Grease: A thickener system offering high temperature stability and water resistance.
- NLGI Grade: A classification of grease consistency, ranging from 000 (fluid) to 6 (hard block).
- Pin and Bushing Lubrication: Greasing points where rotational or sliding motion occurs under load, such as loader arms and excavator buckets.
Field Performance and Operator Feedback
Operators using Schaeffer Perma Moly Grease NLGI2 across various equipment types—including backhoes, compact track loaders (CTLs), dozers, excavators, mowing decks, dump trucks, and trailer shackles—report consistent performance and extended lubrication intervals.
Key observations include:
Compared to conventional red lithium greases, Schaeffer’s moly formulation offers:
An operator in Connecticut switched to Schaeffer NLGI3 moly grease for excavator bucket pins working in abrasive rocky terrain. The thicker consistency provided superior film strength, reducing pin wear and extending service intervals. Despite the grease’s stiffness, it remained pumpable with a high-pressure gun and showed minimal breakdown after 12 hours of continuous operation.
Small Story: The Grease That Saved a Joint
A forestry contractor in Tennessee recalled using Schaeffer moly grease on a loader’s grapple joint that had begun squeaking and showing signs of wear. After switching from a generic lithium grease, the joint quieted down, and wear progression halted. The contractor noted that “there’s no such thing as over-greasing a joint—it just delays replacement time and cost.”
Solutions for Optimized Greasing Practices
To maximize the benefits of Schaeffer Perma Moly Grease:
Schaeffer Perma Moly Grease NLGI2 stands out as a high-performance lubricant tailored for the rigors of heavy equipment operation. Its moly-enhanced formulation provides a durable barrier against wear, shock, and contamination—especially in joints where failure can lead to costly downtime. While it may cost more per tube, its extended service life and reduced consumption make it a smart investment for operators who value reliability and precision. In the world of pins and bushings, this grease earns its place as a quiet guardian of mechanical integrity.
Grease selection is a critical factor in equipment longevity, especially for machines operating under heavy loads, frequent articulation, and variable environmental conditions. Schaeffer’s Perma Moly Grease NLGI2 is a lithium complex-based lubricant fortified with molybdenum disulfide (MoS₂), designed for high-pressure applications and extended service intervals.
The NLGI (National Lubricating Grease Institute) grade indicates the grease’s consistency. NLGI2 is the most commonly used grade, comparable in texture to peanut butter, and suitable for general-purpose applications across a wide temperature range.
Terminology Clarification
- Molybdenum Disulfide (MoS₂): A solid lubricant additive that forms a protective layer under pressure, reducing metal-to-metal contact.
- Lithium Complex Grease: A thickener system offering high temperature stability and water resistance.
- NLGI Grade: A classification of grease consistency, ranging from 000 (fluid) to 6 (hard block).
- Pin and Bushing Lubrication: Greasing points where rotational or sliding motion occurs under load, such as loader arms and excavator buckets.
Field Performance and Operator Feedback
Operators using Schaeffer Perma Moly Grease NLGI2 across various equipment types—including backhoes, compact track loaders (CTLs), dozers, excavators, mowing decks, dump trucks, and trailer shackles—report consistent performance and extended lubrication intervals.
Key observations include:
- Excellent adhesion to metal surfaces, reducing sling-off and washout
- Superior longevity compared to red tacky greases, especially in high-load joints
- Reduced frequency of greasing due to moly’s pressure-resistant film
- Easier pumping in cold weather, especially with synthetic variants
- Cleaner application with less mess and residue buildup
- Application frequency: Every 4–10 operating hours depending on load and articulation
- Operating temperature range: -20°C to 180°C (with short-term peaks up to 200°C)
- Recommended for: Pins, bushings, rod ends, ball joints, and slow-speed bearings
- Avoid use in: High-speed bearings (use lithium or polyurea grease instead)
Compared to conventional red lithium greases, Schaeffer’s moly formulation offers:
- Longer re-greasing intervals due to moly’s solid film protection
- Better resistance to water washout and environmental contamination
- Lower consumption over time, offsetting higher per-tube cost
- Enhanced protection in oscillating and sliding joints under shock load
An operator in Connecticut switched to Schaeffer NLGI3 moly grease for excavator bucket pins working in abrasive rocky terrain. The thicker consistency provided superior film strength, reducing pin wear and extending service intervals. Despite the grease’s stiffness, it remained pumpable with a high-pressure gun and showed minimal breakdown after 12 hours of continuous operation.
Small Story: The Grease That Saved a Joint
A forestry contractor in Tennessee recalled using Schaeffer moly grease on a loader’s grapple joint that had begun squeaking and showing signs of wear. After switching from a generic lithium grease, the joint quieted down, and wear progression halted. The contractor noted that “there’s no such thing as over-greasing a joint—it just delays replacement time and cost.”
Solutions for Optimized Greasing Practices
To maximize the benefits of Schaeffer Perma Moly Grease:
- Use a high-pressure grease gun for NLGI2 and NLGI3 grades
- Clean fittings before each application to prevent contamination
- Monitor grease purge from joints to ensure full coverage
- Rotate grease types seasonally: synthetic moly in winter, standard moly in summer
- Maintain a dedicated grease inventory: one for pins/bushings, one for bearings, one for hydraulic hammers
- Grease daily in high-use environments (e.g., excavation, demolition)
- Inspect joints for signs of dry wear, squeaking, or heat discoloration
- Replace worn zerks and fittings to ensure proper flow
- Document greasing intervals and types used for each machine
Schaeffer Perma Moly Grease NLGI2 stands out as a high-performance lubricant tailored for the rigors of heavy equipment operation. Its moly-enhanced formulation provides a durable barrier against wear, shock, and contamination—especially in joints where failure can lead to costly downtime. While it may cost more per tube, its extended service life and reduced consumption make it a smart investment for operators who value reliability and precision. In the world of pins and bushings, this grease earns its place as a quiet guardian of mechanical integrity.
