Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
John Deere 310 SG Backhoe Loader: An In-Depth Exploration
#1
Introduction and Context
The John Deere 310 SG backhoe loader emerged in the early 2000s as a mid-sized, turbocharged workhorse. Produced from roughly 2000 through 2007 in North America—and continuing in certain markets into the 2010s—it found its niche in construction, road maintenance, and utility work .
Design and Engineering Highlights
This machine blends compact agility with robust performance:
  • Engine: Powered by the John Deere 4045T, a 4.5-litre, turbocharged diesel delivering about 89–91 horsepower .
  • Transmission: Equipped with a power-shuttle (PS) transmission for smooth, clutch-less forward/reverse shifts—ideal for repetitive loader–backhoe cycles .
  • Weight: Its operating weight hovers near 13,500 lb (approximately 6,123 kg), balancing trailering ease with on-site stability .
Key Capabilities (Reformatted as Lists)
Loader Performance
  • Bucket capacity up to 1.3 cubic yards (long-lip bucket).
  • Bucket breakout force up to 10,210 lb.
  • Maximum dump clearance around 11 feet.
  • Loader speed and reach sufficient for typical mid-size loading tasks .
Backhoe Performance
  • Dig depth: around 14.5 feet (standard) and nearly 19 feet with the extend-a-hoe.
  • Bucket digging force: roughly 11,990 lb standard, increasing to 12,158 lb extended.
  • Reach from swivel: up to 22 feet extended.
  • A swing arc of 180°, bucket rotation about 190°, stabilizer rearward angle around 18°, and leveling angle near 14° .
Dimensions & Capacities
  • Transport dimensions: ~23.5 feet length, 7.16 feet width, 11.5 feet height.
  • Wheelbase roughly 6.9 feet; ground clearance about 1 foot; cab height near 9 feet.
  • Fuel capacity ~36 gallons; hydraulic fluid ~24 gallons; various systems holding several gallons each (oil, coolant, transmission, axles) .
Operational Details
  • Gear-type, open-centre hydraulic pump delivering ~28 gpm at around 3,625 psi.
  • Full-power-shifted 4-speed transmission offering up to ~20.5 mph both forward and reverse .
Terminology Explained
  • Breakout force: The maximum force loader/backhoe bucket can exert to break through tough material.
  • Extend-a-hoe: A telescoping dipperstick that increases reach and depth.
  • Power-shuttle (PS): Transmission system allowing seamless direction changes without clutching.
  • Open-centre hydraulic system: Hydraulic setup where fluid returns to tank through an open path, simpler but less efficient than closed-centre systems.
Anecdote: The Ice Storm Rescue
During a mountainous winter, municipal crews used a 310 SG to clear fallen trees after an ice storm. With its extend-a-hoe, they reached over icy ditches to recover downed limbs. One operator recalled that despite freezing conditions and slippery terrain, the machine’s breakout force broke through frozen debris as if it were butter—testament to its reliable digging performance. The power-shuttle transmission made maneuvering between obstacles effortless, even as visibility worsened in swirling snow.
Real-World Feedback
Operators and refurbishers frequently comment on the 310 SG’s strength and durability. In aftermarket specs, it's noted:
  • Engine components, power-shuttle systems, and hydraulic parts are widely available and maintainable—making the 310 SG a favorite for long-term fleet use .
  • A preservation story: A 2005 unit with low hours and original owner status recently resold for around $58,000, still sporting ride control, pilot-controls cab with heat and A/C, extend-a-hoe, and 4x4 configuration—reflecting its retainable value .
Maintenance Overview (As List)
Recommended routine intervals:
  • Change engine oil and filter every 100 hours.
  • Replace fuel filter every 200 hours.
  • Service hydraulic and transmission systems every 250-300 hours.
  • Grease all loader/backhoe pins daily or before operation.
  • Flush coolant annually or around every 1,000 hours .
Final Thoughts
The John Deere 310 SG stands out as a reliable, well-balanced backhoe loader that delivers solid digging and lifting capabilities, efficient controls, and long-lasting service. Its specifications—like impressive breakout force, ample dig depth with extendable reach, and sensible operating weight—coupled with durable parts availability, make it a perennial favorite among contractors and municipalities alike.
Whether you're digging trenches, clearing debris, or tackling general jobsite tasks, the 310 SG consistently proves its value through long-term performance and maintainability.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  385C Excavator — An In-Depth Technical Overview MikePhua 0 1 2 hours ago
Last Post: MikePhua
  Restoring Traction: Grouser Bar Replacement on the Deere 850J LGP Dozer MikePhua 0 1 5 hours ago
Last Post: MikePhua
  Caterpillar 259B Series 3 Compact Track Loader: Performance, Design, and Applications MikePhua 0 1 5 hours ago
Last Post: MikePhua
  Bulldog 2-in-1 Ride-On Loader Backhoe: Features, Troubleshooting, and Maintenance Tips MikePhua 0 1 5 hours ago
Last Post: MikePhua
  Reviving the Art of Track Loader Operation: A Generational Shift in Earthmoving MikePhua 0 1 6 hours ago
Last Post: MikePhua
  Maximizing the Utility of the John Deere 450B Crawler Loader with a 4-in-1 Bucket MikePhua 0 1 6 hours ago
Last Post: MikePhua
  Fuel Consumption in Caterpillar vs John Deere Equipment: Factors, Comparisons, and Solutions MikePhua 0 1 6 hours ago
Last Post: MikePhua
  John Deere 950J vs. CAT D7R Waste Handlers: A Detailed Comparison MikePhua 0 2 6 hours ago
Last Post: MikePhua
  Understanding the Dimensions and Specifications of Deere-Hitachi Quick-Tach Attachments MikePhua 0 1 6 hours ago
Last Post: MikePhua
  Comprehensive Guide to Fuel Injector Replacement for JCB 1400B Backhoe MikePhua 0 1 6 hours ago
Last Post: MikePhua
  Skid Steer vs. Compact Track Loader: A Comprehensive Comparison MikePhua 0 1 6 hours ago
Last Post: MikePhua
  Case 580C Tractor Loader: A Comprehensive Overview and Maintenance Guide MikePhua 0 1 6 hours ago
Last Post: MikePhua
  Restoring Bucket Integrity: A Practical Guide to Case Backhoe Bushing Replacement MikePhua 0 1 6 hours ago
Last Post: MikePhua
  Bobcat 843 Drive System: In-Depth Overview, Components, and Maintenance MikePhua 0 1 6 hours ago
Last Post: MikePhua
  Caterpillar 953A Track Loader: In-Depth Overview and Common Questions MikePhua 0 1 7 hours ago
Last Post: MikePhua

Forum Jump:


Users browsing this thread: