Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Removing the A/C Compressor on a Bobcat T770: Techniques, Challenges, and Field Wisdom
#1
Introduction
The Bobcat T770, a compact track loader known for its power and versatility, presents unique challenges when servicing components tucked deep within its engine bay. One of the more daunting tasks is removing the air conditioning (A/C) compressor, especially on models like the 2012 T770 where access is limited. This article explores the removal process, clarifies relevant terminology, and shares field-tested strategies and anecdotes to help technicians navigate this repair with confidence.
Understanding the A/C Compressor Location and Constraints
On the Bobcat T770, the A/C compressor is mounted behind the engine, in a space that’s notoriously tight and obstructed by surrounding components. Unlike automotive setups with front-facing compressors, the T770’s rear-mounted configuration demands creative disassembly and patience.
Key obstructions include:
  • Alternator and water pump pulley
  • Hydraulic hoses routed to the bucket
  • Wiring harnesses and fan shrouds
  • Loader arms and side louvers
Terminology Clarified
  • A/C Compressor: A belt-driven pump that pressurizes refrigerant and circulates it through the air conditioning system.
  • Fan Shroud: A plastic or metal cover that directs airflow from the cooling fan, often obstructing access to rear-mounted components.
  • Loader Arm: The hydraulic arm assembly used for lifting attachments; its position can limit side access to engine components.
  • Cab Tilt: The ability to raise the operator cab for improved access to internal components.
Step-by-Step Removal Strategy
While no official service manual outlines a simple removal path, experienced technicians have developed a practical approach:
  • Raise the Cab
    This provides vertical access and visibility to the engine compartment.
  • Remove the Fan Shroud and Side Louver
    These components block lateral access and must be removed to reach the compressor from the side.
  • Disconnect Hydraulic Hoses
    Specifically, the hoses leading to the bucket on the engine side. Wire them up and out of the way to create working space.
  • Remove the Alternator and Water Pump Pulley
    These parts obstruct the compressor and must be taken out to allow clearance.
  • Loosen the Compressor Mounting Bolts
    Once the surrounding components are cleared, the compressor can be unbolted and maneuvered into the newly created space.
  • Disconnect Refrigerant Hoses
    With the compressor loose, rotate it until the hose fittings are accessible, then disconnect them carefully.
  • Extract the Compressor
    Continue rotating and repositioning until the compressor slides out through the gap.
Field Anecdote: North Carolina Repair Experience
A technician in Elon, NC tackled the removal of a 2012 T770 compressor and shared that the process took about three hours. By removing key components and carefully repositioning the compressor, they were able to extract it without pulling the engine—a common fear among operators. The technician noted that with experience, the job could be completed in under an hour.
Historical Context: Compact Loader Service Challenges
Compact loaders like the Bobcat T770 are designed for performance in tight spaces, but this often comes at the cost of serviceability. Unlike older skid steers with open engine bays, modern Tier 4-compliant machines pack more components into smaller frames. This has led to increased reliance on cab tilting, modular component design, and creative disassembly techniques.
Case Study: Avoiding Engine Removal
In several service centers, technicians have debated whether engine removal is necessary for compressor replacement. While some models may require partial engine extraction, the T770 allows for compressor removal with strategic disassembly. This saves time, reduces labor costs, and avoids the risks associated with engine handling.
Best Practices for Compressor Removal
  • Label and photograph wiring and hose connections before disassembly
  • Use magnetic trays to organize bolts and fasteners
  • Wear gloves and eye protection when handling refrigerant lines
  • Inspect surrounding components for wear while access is available
  • Replace O-rings and seals during reinstallation to prevent leaks
  • Recharge the A/C system with the correct refrigerant type and quantity
Conclusion
Removing the A/C compressor on a Bobcat T770 is a challenging but manageable task with the right strategy and patience. By understanding the layout, clarifying terminology, and applying field-tested techniques, technicians can avoid unnecessary engine removal and complete the repair efficiently. In the world of compact equipment, tight spaces demand clever hands—and a willingness to turn the wrench until the path reveals itself.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Comparing Bobcat T650 and T750 Skid Steers MikePhua 0 10 Yesterday, 07:58 PM
Last Post: MikePhua
  Why Is My Bobcat T180 Losing Hydraulic Fluid Without Visible Leaks MikePhua 0 4 Yesterday, 07:48 PM
Last Post: MikePhua
  Should You Choose the Bobcat T740 or T870 for Long-Term Ownership MikePhua 0 9 Yesterday, 06:51 PM
Last Post: MikePhua
  Is the Bobcat Depth Check System Worth the Investment for Excavator Operators MikePhua 0 7 Yesterday, 06:29 PM
Last Post: MikePhua
  Komatsu D51PX-23 Dozer on Blasted Rock: Challenges and Solutions MikePhua 0 8 Yesterday, 04:13 PM
Last Post: MikePhua
  Identifying Unmarked Loaders: Common Challenges and How to Overcome Them MikePhua 0 4 10-21-2025, 11:51 PM
Last Post: MikePhua
  Heavy Equipment and its Role in the Pacific Northwest: Challenges and Opportunities MikePhua 0 7 10-21-2025, 06:38 PM
Last Post: MikePhua
  Working in Papua New Guinea: Challenges and Considerations for Heavy Equipment Operators MikePhua 0 10 10-21-2025, 05:40 PM
Last Post: MikePhua
  Old Machines for Modern Jobs: The Challenges and Benefits MikePhua 0 8 10-21-2025, 03:35 PM
Last Post: MikePhua
  Women in the Heavy Equipment Industry: Challenges and Progress MikePhua 0 7 10-21-2025, 03:03 PM
Last Post: MikePhua
  Bobcat T200 Skid-Steer: A Comprehensive Overview MikePhua 0 19 10-20-2025, 02:20 PM
Last Post: MikePhua
  Moving Dirt with Heavy Equipment: Tips and Lessons from the Field MikePhua 0 10 10-20-2025, 02:12 PM
Last Post: MikePhua
  Field Equipment Management and Best Practices MikePhua 0 14 10-20-2025, 01:49 PM
Last Post: MikePhua
  Operating the Largest Earthmoving Machines in the Field MikePhua 0 15 10-19-2025, 03:05 PM
Last Post: MikePhua
  Bobcat 331 Mini Excavator Overview MikePhua 0 21 10-19-2025, 02:59 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)