3 hours ago
Introduction to the Bobcat 853 Skid Steer
The Bobcat 853 is a mid-sized skid steer loader produced in the late 1980s and early 1990s. Known for its robust frame, reliable diesel engine, and straightforward hydraulic system, it remains a popular choice among DIY mechanics and small contractors. With an operating capacity of around 1,700 lbs and a 60-horsepower engine, the 853 offers solid performance for grading, lifting, and light excavation tasks.
Terminology Clarification
The machine in question was offered for $4,000, reportedly running but requiring a cylinder replacement. With approximately 2,500 hours on the meter, it presents as a potential winter project for a diesel mechanic. The buyer already owns a Bobcat 753, suggesting familiarity with the platform and parts interchangeability.
Assessing the Cylinder Issue
The term “cylinder” can refer to either a hydraulic or engine component. In this case, the ambiguity prompted discussion:
Field Anecdote: The Winter Project Tradition
In rural Ohio, a diesel mechanic purchased a non-running Bobcat 843 for $3,200. Over the winter, he rebuilt the lift cylinders, replaced hoses, and installed new tires. By spring, the machine was operational and sold for $8,500. The project not only yielded profit but also served as a bonding experience with his teenage son, who learned basic hydraulics and welding.
Market Value and Regional Variability
Operators noted that in some regions, a running Bobcat 853—even with minor issues—is worth more than $4,000. In Western Washington, for example, similar machines fetch $6,000–$8,000 depending on condition. Even non-running units with intact frames and engines are considered valuable for parts or restoration.
Best Practices for Evaluating Used Equipment
Purchasing a Bobcat 853 for $4,000 with a known cylinder issue can be a worthwhile investment—especially for a skilled mechanic seeking a winter project. With manageable repairs and a solid resale market, the machine offers both utility and learning opportunities. As with any used equipment, success depends on careful inspection, realistic expectations, and a willingness to get your hands dirty. In the world of iron and hydraulics, sometimes the best deals come wrapped in grease and potential.
The Bobcat 853 is a mid-sized skid steer loader produced in the late 1980s and early 1990s. Known for its robust frame, reliable diesel engine, and straightforward hydraulic system, it remains a popular choice among DIY mechanics and small contractors. With an operating capacity of around 1,700 lbs and a 60-horsepower engine, the 853 offers solid performance for grading, lifting, and light excavation tasks.
Terminology Clarification
- Skid Steer Loader: A compact, maneuverable machine with lift arms used for various attachments.
- Hydraulic Cylinder: A mechanical actuator that converts hydraulic energy into linear motion, used to lift or tilt the loader arms or bucket.
- Engine Cylinder: A combustion chamber within the engine block where fuel is ignited to produce power.
- Operating Hours: The total time the machine has been in use, often tracked via an hour meter.
- Project Loader: A machine purchased with the intent to repair or restore before use or resale.
The machine in question was offered for $4,000, reportedly running but requiring a cylinder replacement. With approximately 2,500 hours on the meter, it presents as a potential winter project for a diesel mechanic. The buyer already owns a Bobcat 753, suggesting familiarity with the platform and parts interchangeability.
Assessing the Cylinder Issue
The term “cylinder” can refer to either a hydraulic or engine component. In this case, the ambiguity prompted discussion:
- Hydraulic Cylinder Replacement
Typically involves removing the damaged cylinder, sourcing a replacement or rebuild kit, and reinstalling. This can be completed in a weekend with basic tools.
- Engine Cylinder Repair
More complex, requiring disassembly of the engine head, piston inspection, and possibly machining. This would extend the project timeline and increase costs.
Field Anecdote: The Winter Project Tradition
In rural Ohio, a diesel mechanic purchased a non-running Bobcat 843 for $3,200. Over the winter, he rebuilt the lift cylinders, replaced hoses, and installed new tires. By spring, the machine was operational and sold for $8,500. The project not only yielded profit but also served as a bonding experience with his teenage son, who learned basic hydraulics and welding.
Market Value and Regional Variability
Operators noted that in some regions, a running Bobcat 853—even with minor issues—is worth more than $4,000. In Western Washington, for example, similar machines fetch $6,000–$8,000 depending on condition. Even non-running units with intact frames and engines are considered valuable for parts or restoration.
Best Practices for Evaluating Used Equipment
- Inspect frame welds and loader arm bushings
- Check hydraulic hoses for cracks or leaks
- Test engine compression and listen for knocking
- Verify hour meter accuracy and look for signs of tampering
- Examine tires or tracks for wear and dry rot
- Confirm availability of parts through local dealers or salvage yards
- Set a realistic budget for parts and tools
- Allocate time for troubleshooting and unexpected delays
- Document repairs for future resale or maintenance
- Use OEM or high-quality aftermarket components
- Consult service manuals and online communities for guidance
Purchasing a Bobcat 853 for $4,000 with a known cylinder issue can be a worthwhile investment—especially for a skilled mechanic seeking a winter project. With manageable repairs and a solid resale market, the machine offers both utility and learning opportunities. As with any used equipment, success depends on careful inspection, realistic expectations, and a willingness to get your hands dirty. In the world of iron and hydraulics, sometimes the best deals come wrapped in grease and potential.
