Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can I Add Ride Control to My Skid Steer?
#1
Introduction
When using skid steers, comfort and ride quality are often important factors, especially for long workdays or rough terrain. Ride control systems can provide a smoother experience by absorbing shock and reducing the impact from uneven surfaces. If your skid steer doesn’t come with ride control, you may be wondering if it's possible to add this feature to your machine. This article explores the possibility of retrofitting ride control to a skid steer, what it entails, and whether it’s a worthwhile investment.
What is Ride Control?
Ride control is a system designed to smooth out the ride of a machine by reducing the effects of sudden bumps, jolts, or shocks, especially when driving over rough terrain. This is achieved through a system of hydraulic dampers, shock absorbers, or air-suspension systems. On a skid steer, ride control can help improve operator comfort, reduce fatigue, and increase productivity by maintaining smoother travel speeds.
Can Ride Control Be Added to a Skid Steer?
Yes, it is possible to add a ride control system to certain skid steers, but it typically depends on the make and model of your machine. Many modern skid steers are designed to accommodate retrofitting of ride control systems, but the process can vary based on the machine's age, hydraulic setup, and available options from the manufacturer or aftermarket providers.
Factors to Consider When Adding Ride Control
  1. Compatibility
    • Not all skid steers are designed to easily accommodate ride control retrofits. Older models or those without the necessary hydraulic system or mounting points may face more challenges when adding this feature.
    • It’s important to consult with the manufacturer or a dealer to determine if your skid steer can be retrofitted with ride control.
  2. Hydraulic System
    • Ride control systems typically require additional hydraulic components, including dampers, accumulators, or valves, which need to be integrated into the existing hydraulic system. This may involve installing new lines, pumps, or control valves.
    • Check the available hydraulic flow and pressure on your skid steer to ensure it can handle the added components.
  3. Cost of Retrofit
    • Retrofitting a skid steer with ride control can be a costly process. The cost will depend on the complexity of the installation and the components required.
    • In addition to the hardware, installation labor and potential downtime for the machine may also add to the overall expense.
  4. Manufacturer and Aftermarket Options
    • Some manufacturers offer ride control as an optional upgrade that can be added to certain models. If this is the case, it's often easier and more cost-effective to have the system installed by the dealer.
    • For machines that do not have this option, there are aftermarket solutions available. Many companies specialize in ride control systems and may offer universal kits that can be adapted to different makes and models of skid steers.
Pros of Adding Ride Control
  1. Improved Operator Comfort
    • The primary benefit of ride control is the improved comfort for operators, especially when working for extended hours or over rough terrain. A smoother ride helps reduce fatigue and makes the work environment more tolerable.
  2. Increased Productivity
    • Smoother operation can result in better efficiency. Operators can maintain higher speeds without being jolted, which can increase overall productivity.
  3. Reduced Machine Wear
    • The reduction in shock and impact may also help extend the lifespan of both the machine and its components, reducing maintenance costs in the long run.
  4. Versatility in Various Conditions
    • Ride control allows operators to work in a wider variety of conditions, including rough or uneven surfaces, without sacrificing comfort or control.
Cons of Adding Ride Control
  1. Upfront Cost
    • As mentioned, retrofitting a ride control system can be expensive. The initial investment might not be justifiable for all operators, especially if they are not using their skid steer in rough conditions regularly.
  2. Complexity of Installation
    • Adding ride control to a skid steer requires knowledge of hydraulic systems and proper installation techniques. If done incorrectly, the system may not function as intended, or it could lead to further mechanical issues.
  3. Potential Compatibility Issues
    • If the ride control system is not properly integrated with the machine’s existing components, it could lead to operational inefficiencies or damage to the skid steer.
Conclusion
Adding ride control to your skid steer can provide significant benefits in terms of comfort, productivity, and long-term machine health, but it’s not always a simple or cost-effective modification. Before deciding to retrofit a ride control system, you should carefully assess the compatibility of your skid steer, the costs involved, and whether the system is necessary for your type of work. Consulting with a dealer or hydraulic specialist is always a good idea to ensure the system is properly installed and maintained.
In the end, if your skid steer operates in demanding conditions or is used for long hours, the investment in ride control could pay off in improved operator satisfaction and reduced downtime. However, for lighter use or on smooth surfaces, it may not be a critical addition.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Fuel Consumption and Machine Size in Skid Steer Selection MikePhua 0 1 3 minutes ago
Last Post: MikePhua
  John Deere 8875 Skid Steer Loader Buying Guide MikePhua 0 1 5 minutes ago
Last Post: MikePhua
  Bobcat S550, S650, and S750: A Comparative Overview of Bobcat's Skid Steer Loaders MikePhua 0 1 10 minutes ago
Last Post: MikePhua
  Hydraulic Control Challenges in the Komatsu PC200-6 MikePhua 0 5 13 minutes ago
Last Post: MikePhua
  Comparing Bobcat T650 and T750 Skid Steers MikePhua 0 10 Yesterday, 07:58 PM
Last Post: MikePhua
  What Kind of Load Requires a Twin-Steer Tri-Drive Tractor with Dual Lift Axles MikePhua 0 9 Yesterday, 07:54 PM
Last Post: MikePhua
  John Deere 320 Skid Steer: Features, Maintenance, and Troubleshooting MikePhua 0 4 Yesterday, 07:48 PM
Last Post: MikePhua
  CAT 226 Skid Steer Owner’s Manual: Comprehensive Guide for Operators MikePhua 0 11 Yesterday, 07:16 PM
Last Post: MikePhua
  Can a Forest Trac Mulcher Be Adapted for Skid Steer Use MikePhua 0 9 Yesterday, 07:05 PM
Last Post: MikePhua
  Takeuchi TL150 Skid Steer Loader Overview MikePhua 0 10 Yesterday, 06:02 PM
Last Post: MikePhua
  Can the JCB 214E Control Pattern Be Changed to Match CAT 426 MikePhua 0 4 Yesterday, 05:22 PM
Last Post: MikePhua
  Switching to CAT Control Pattern on a Hyundai 140 LCD MikePhua 0 6 Yesterday, 04:51 PM
Last Post: MikePhua
  2005 Deere 755C Series 2 Dozer Steering Control Issue MikePhua 0 10 Yesterday, 04:23 PM
Last Post: MikePhua
  Compact Wheel Loader vs Skid Steer for Versatile Job Sites MikePhua 0 8 Yesterday, 04:04 PM
Last Post: MikePhua
  CAT 246D Skid Steer Operational Review and Ergonomic Assessment MikePhua 0 8 Yesterday, 03:58 PM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)