1964 Trojan Loader Parts – Sourcing and Recommendations

[MikePhua]

Introduction
The 1964 Trojan Loader is an older model of construction equipment that continues to be in use due to its durability and solid performance. As with any vintage machinery, finding replacement parts can be a challenge. This article discusses where and how to source parts for the 1964 Trojan Loader, including some common issues faced by operators and recommendations for maintenance.
1. Common Issues with the 1964 Trojan Loader
While the 1964 Trojan Loader is a robust piece of equipment, like all machinery of its age, it does come with some common problems. Some of the most frequently encountered issues include:

• Hydraulic System Leaks: Over time, hydraulic seals wear out, leading to oil leaks and reduced performance.
  
• Electrical Problems: Due to the age of the wiring and components, electrical issues can occur, especially with starters and alternators.
  
• Engine Performance: As the engine ages, it can experience issues such as difficulty starting, overheating, or misfiring.
  
• Wear and Tear on the Bucket: The bucket and associated hardware are subject to wear, leading to cracks, dents, and reduced efficiency in lifting or digging operations.
  

2. Sourcing Parts for the 1964 Trojan Loader
Finding replacement parts for a machine that was produced over 50 years ago can be a difficult task. Here are some recommended sources for parts:

• OEM and Aftermarket Suppliers: Some companies specialize in OEM (Original Equipment Manufacturer) and aftermarket parts for older machines. Websites such as Partsguy or Heavy Equipment Forums provide listings of parts specifically for vintage loaders like the Trojan.
  
• Used and Salvaged Parts: Often, used parts from older, decommissioned machines can be a cost-effective solution. Searching online auction sites or contacting junkyards that specialize in heavy machinery is a good place to find salvaged parts.
  
• Local Equipment Dealers: Some local dealerships that sell or service older construction equipment may have parts in stock or may be able to special order parts for the 1964 Trojan Loader.
  
• Online Heavy Equipment Forums: Forums such as Heavy Equipment Forums can be valuable resources for locating hard-to-find parts. Fellow operators may have spare parts or know of suppliers that specialize in vintage equipment.
  
• Specialist Repair Shops: There are specialized shops that focus on repairing and restoring older construction equipment. These shops often have access to rare parts or can custom-manufacture certain components when necessary.
  

3. Key Parts to Focus On
When sourcing parts, certain components tend to wear out more frequently than others. It is a good idea to prioritize these parts during your search:

• Hydraulic Pump: The hydraulic pump is a critical component of the Trojan Loader’s lifting and digging capability. Replacement or repair of this part may be necessary if it shows signs of wear.
  
• Engine Components: Parts such as pistons, cylinder heads, and timing belts might need attention, especially if the engine has been running roughly or showing signs of performance degradation.
  
• Electrical System: Components such as the starter, alternator, and wiring harness should be checked periodically for wear. Given the age of the equipment, these parts are likely to need replacement over time.
  
• Bucket and Attachments: The bucket is one of the most important parts of the loader, and over time, the cutting edges and wear plates can become worn down or damaged. Keep an eye out for any damage to the bucket or its attachments to ensure optimal performance.
  

4. Restoration and Upgrades
If you are interested in restoring the 1964 Trojan Loader to its original glory, you might want to consider certain upgrades that could improve performance and extend the lifespan of the machine. Here are some suggestions:

• Upgrading the Hydraulic System: Many operators upgrade the hydraulic system with newer, more efficient components to improve lifting power and reduce maintenance costs.
  
• Engine Overhaul: A complete engine overhaul, including replacing seals, gaskets, and other worn parts, can bring the loader’s engine back to life and improve reliability.
  
• Electrical System Modernization: Replacing the old electrical components with modern, more reliable versions can improve the machine’s efficiency and reduce the likelihood of unexpected failures.
  

5. Conclusion
While sourcing parts for the 1964 Trojan Loader may present some challenges, it is certainly possible with the right resources and a bit of patience. Whether you’re looking for OEM parts, salvaged components, or considering upgrades, there are various avenues to explore. The key is to maintain the equipment properly and be proactive about sourcing parts before they fail, ensuring that the Trojan Loader continues to serve its purpose for years to come.