Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DPF Smoke Issues After Solvent Cleaning: Causes and Solutions
#1
Problem Overview
Users reported experiencing excessive smoke coming from Diesel Particulate Filters (DPF) after performing solvent cleaning. This raised concerns about potential damage or improper cleaning methods.
Understanding Solvent Cleaning Effects
The discussion explained that solvent cleaning can loosen accumulated soot and ash inside the DPF, but may also leave residues that cause smoke during subsequent engine operation. Incomplete drying or flushing of solvents can exacerbate the issue.
Common Causes of Post-Cleaning Smoke
Contributors identified causes such as residual solvent burning off, damaged filter substrates, or clogging due to redeposited particles. Improper cleaning techniques or the use of unsuitable solvents were also highlighted.
Recommended Solutions
Users suggested thoroughly drying the DPF before reinstalling and running a proper regeneration cycle to burn off remaining residues. In some cases, professional cleaning services or replacement of the DPF were recommended if damage was suspected.
Preventive Measures
It was emphasized to follow manufacturer guidelines for cleaning and regeneration to avoid smoke and maintain filter integrity. Using approved cleaning products and methods reduces the risk of post-cleaning problems.
Conclusion
Smoke after solvent cleaning of a DPF is often due to residual solvents or improper cleaning. Careful drying, proper regeneration, and adherence to recommended procedures help prevent this issue and ensure the DPF functions effectively.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CAT 140M Service Advisory: Key Issues and Solutions MikePhua 0 6 Yesterday, 05:52 PM
Last Post: MikePhua
  Glow Plug Control Issues on the CAT 301.7D CR Excavator MikePhua 0 11 Yesterday, 03:51 PM
Last Post: MikePhua
  Ford 555B Backhoe: Overview, Issues, and Maintenance Insights MikePhua 0 8 Yesterday, 03:47 PM
Last Post: MikePhua
  Understanding the Case 70 XT Skid Steer: Features, Maintenance, and Common Issues MikePhua 0 6 Yesterday, 03:43 PM
Last Post: MikePhua
  Hydraulic Oil Selection and System Cleaning for the Caterpillar 955L Track Loader MikePhua 0 10 Yesterday, 03:32 PM
Last Post: MikePhua
  Komatsu 700H Dozer: An Overview of Performance, Issues, and Maintenance MikePhua 0 6 Yesterday, 03:27 PM
Last Post: MikePhua
  Is a Case 1845C Skid Steer with Drive and Lift Issues Still Worth Buying MikePhua 0 11 10-19-2025, 01:50 PM
Last Post: MikePhua
  Bobcat Tracks – Design, Issues, and Best Practices MikePhua 0 20 10-16-2025, 11:46 PM
Last Post: MikePhua
  Cat 301.5 Mini Excavator: Overview, Features, and Common Issues MikePhua 0 25 10-15-2025, 12:15 PM
Last Post: MikePhua
  1968 Case 580 CK: S Position and Transmission Issues MikePhua 0 16 10-14-2025, 02:36 PM
Last Post: MikePhua
  CAT 323F with Thumb and Jackhammer: Performance, Maintenance, and Common Issues MikePhua 0 25 10-14-2025, 02:02 PM
Last Post: MikePhua
  Sweeper Equipment: Essential for Efficient Cleaning and Maintenance MikePhua 0 18 10-14-2025, 01:30 AM
Last Post: MikePhua
  CAT D5G Dozer: Performance and Common Issues MikePhua 0 23 10-14-2025, 01:25 AM
Last Post: MikePhua
  Travel Speed Control Issues on Hitachi ZX120 Excavator MikePhua 0 26 10-14-2025, 01:19 AM
Last Post: MikePhua
  Hitachi ZX 870-3 Excavator: Features, Performance, and Common Issues MikePhua 0 22 10-14-2025, 12:11 AM
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)