7 hours ago
Gehl Brand Background
Gehl is a well‑known American manufacturer of compact construction equipment, now part of Manitou Americas. The company has deep roots, dating back to the 1800s, and over decades it has built a reputation for durable and practical skid-steer loaders and compact machines. The 5635 model series, including the DXT variant, is part of Gehl’s mid‑frame loader lineup.
Key Specifications of the 5635 DXT
Based on technical data:
The 5635 DXT is well-suited for:
The Gehl 5635 DXT is a rugged, reliable skid steer loader that blends mechanical simplicity with good hydraulic and engine performance. It's especially appreciated by operators who favor a heavy-duty frame and a no-nonsense diesel engine. While maintenance and parts sourcing require attention on older units, the machine’s design and capacity make it a valuable tool for construction, landscaping, and farm use. With proper maintenance, it can deliver long, dependable service.
Gehl is a well‑known American manufacturer of compact construction equipment, now part of Manitou Americas. The company has deep roots, dating back to the 1800s, and over decades it has built a reputation for durable and practical skid-steer loaders and compact machines. The 5635 model series, including the DXT variant, is part of Gehl’s mid‑frame loader lineup.
Key Specifications of the 5635 DXT
Based on technical data:
- Engine: Deutz BF4M1011F, a 4‑cylinder turbocharged diesel.
- Rated Engine Power: ~75 hp.
- Hydraulics:
- Standard flow: 23 gpm (87.1 L/min)
- System relief pressure: 3000 psi (207 bar)
- Standard flow: 23 gpm (87.1 L/min)
- Operating Capacities:
- Rated capacity: 1900 lbs (862 kg)
- Tipping load: 3800 lbs (1724 kg)
- Rated capacity: 1900 lbs (862 kg)
- Lift / Dump Heights:
- Max hinge pin height: ~122.7″ (3120 mm)
- Dump height: ~93.7″ (2380 mm)
- Max hinge pin height: ~122.7″ (3120 mm)
- Tyres: Common sizes include 12 × 16.5 or 33‑15.5 × 16.5.
- Capacities & Fluids:
- Fuel tank: ~19.0 gal (72 L)
- Hydraulic reservoir: ~16.0 gal (60.5 L)
- Chain‑case (roller chain case) oil: ~2.0 gal (7.6 L)
- Fuel tank: ~19.0 gal (72 L)
- Dimensions:
- Width (without bucket): ~66.2″ (168 cm)
- Ground clearance: ~7.5″ (19 cm)
- Width (without bucket): ~66.2″ (168 cm)
- The DXT model uses a radial-lift boom, which provides a good balance between reach and lift force.
- Its open-center hydraulic system supports a three-valve configuration, allowing for standard and optional high-flow attachments depending on setup.
- The strong Deutz turbo engine provides good torque (~239 Nm or 176 lb-ft at 1,800 rpm) per spec sheets, making it capable for tough digging or loading tasks.
- Maximum travel speeds for the DXT (depending on configuration) may reach up to ~12.5 mph (20 km/h) in high-range gear.
- Gehl recommends lubricating pivot points on the loader boom every 50 hours to prevent premature wear.
- Selected fluids are very specific: for hydraulic oil, Gehl suggests high-quality brands like Mobil DTE 15M or equivalent.
- The chain case oil (for the undercarriage chain drive) should use compatible hydraulic-grade oil, typically the same spec as the chain-case sump.
- In a discussion among users, one person noted that previous models (like the similar SXT) had old cracked tires and engine overhauls, but that the 5635 frame was solid and heavy-duty.
- Another user who had run the 35-series (Gehl 35) suggested the machine felt unusually stable compared to other brands like Bobcat, even without sophisticated electronics.
- Some users appreciate the mechanical simplicity: it's possible to work on the Deutz engine and hydraulic system without needing complex diagnostic electronics.
The 5635 DXT is well-suited for:
- General Construction: Material handling, digging, trenching
- Landscaping & Rental Fleets: Its size and capacity make it very versatile
- Farm Use: For operations that don’t require extremely high flow systems but do need lifting and pushing power
- Without high-flow hydraulics, certain attachments (e.g., high-duty grapples or mulchers) may have limited performance.
- Mechanical-age models may require serious maintenance on the engine or undercarriage chain drive.
- Fuel consumption can be moderate under heavy load, due to the turbo engine.
- Older models might lack modern comfort features, so cabin ergonomics and noise may feel dated.
- Finding parts for 5635s can be challenging, depending on region and age, so keeping a well-documented service history helps.
- For those maintaining or restoring, a repair manual is very valuable. For example, a downloadable technical workshop manual exists for the SL/35-series skids. Gehl SL 5635/6635 Series II Repair Manual
- Solid tire options are available for the 5635 series, such as Gehl SL 5635/DXT Solid Tires (McLaren) — useful for heavy duty or rental use where flats are a concern.
The Gehl 5635 DXT is a rugged, reliable skid steer loader that blends mechanical simplicity with good hydraulic and engine performance. It's especially appreciated by operators who favor a heavy-duty frame and a no-nonsense diesel engine. While maintenance and parts sourcing require attention on older units, the machine’s design and capacity make it a valuable tool for construction, landscaping, and farm use. With proper maintenance, it can deliver long, dependable service.
