Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Choosing the Right Mower for Excavator-Based Brush Clearing
#1
Rotary vs Flail Mowers for Excavator Use
When clearing brush and saplings with an excavator, the choice between a rotary mower and a flail mower significantly impacts the quality of the finished cut. Rotary mowers, often adapted from skid steer attachments, use high-speed spinning blades to shear vegetation. While effective for rapid clearing, they tend to leave behind large, uneven chunks of wood—especially when tackling saplings up to 2 inches and occasional bushes as thick as 4 inches. This rough finish may not meet the expectations of clients seeking a cleaner, more uniform result.
Flail mowers, by contrast, use a series of small, pivoting knives or hammers mounted on a rotating drum. These tools strike vegetation with a chopping motion, producing a finer mulch and a more consistent finish. This makes flail mowers particularly well-suited for applications where aesthetics and ground finish matter, such as roadside maintenance, vineyard clearing, or residential brush control.
Hydraulic Flow Requirements and Machine Compatibility
The effectiveness of any mower attachment depends heavily on hydraulic flow. In this case, the excavator in use is a Takeuchi TB290, which delivers approximately 26 gallons per minute (gpm) of auxiliary hydraulic flow. This is sufficient for many mid-sized flail mowers, though it’s essential to match the mower’s flow and pressure requirements to the machine’s capabilities.
Key parameters to verify include:
  • Minimum flow: 20–25 gpm for mid-duty flail mowers
  • Operating pressure: typically 3,000–3,500 psi
  • Case drain requirement: many flail mowers require a third line to return excess oil to the tank
Failing to meet these specs can result in poor performance, overheating, or premature wear of the hydraulic motor.
Mounting and Control Considerations
Excavator-mounted mowers require a secure coupler and a stable boom for safe operation. Unlike skid steers, excavators offer extended reach and better visibility, especially when working on slopes or around obstacles. However, they also introduce challenges in maneuverability and control finesse.
To optimize performance:
  • Use a proportional auxiliary control circuit for smooth modulation
  • Install a flow control valve to fine-tune speed and torque
  • Ensure the mower is balanced and properly supported to avoid boom stress
Field Experience and Operator Feedback
Operators who have transitioned from rotary to flail mowers often report improved satisfaction from clients due to the cleaner finish. One contractor in Northern California noted that after switching to a flail mower on a similar-sized excavator, customer complaints about “shredded stumps” and “flying debris” dropped significantly. The flail mower also reduced the need for follow-up cleanup, saving time and labor.
Maintenance and Durability
Flail mowers require regular inspection of the knives or hammers, which can dull or break when striking rocks or metal debris. However, their modular design allows for easy replacement. Rotary blades, while more robust, can bend or crack under heavy impact and are more difficult to sharpen evenly.
Recommended maintenance practices include:
  • Greasing drum bearings every 10–20 hours
  • Checking knife bolt torque weekly
  • Cleaning debris from the housing to prevent imbalance
Conclusion
For excavator-based brush clearing where finish quality is a priority, a flail mower offers superior mulching and a more professional result compared to a rotary mower. With the right hydraulic match and proper setup, a flail mower can transform a Takeuchi TB290 into a highly effective vegetation management tool. The investment pays off in reduced cleanup time, improved customer satisfaction, and safer, more controlled operation.
Reply


Messages In This Thread
Choosing the Right Mower for Excavator-Based Brush Clearing - by MikePhua - 10-14-2025, 01:35 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Choosing the Right Excavator Size for Your Project MikePhua 0 13 4 hours ago
Last Post: MikePhua
  Should You Replace a Clutch Fan with Direct Drive on Your Excavator MikePhua 0 11 4 hours ago
Last Post: MikePhua
  Komatsu PC75UU-2 Excavator: Insights and Key Considerations MikePhua 0 10 5 hours ago
Last Post: MikePhua
  Choosing the Right Replacement for Volvo A40F Haul Trucks MikePhua 0 12 5 hours ago
Last Post: MikePhua
  Should You Buy an Excavator That Has Been Submerged MikePhua 0 9 5 hours ago
Last Post: MikePhua
  Choosing a 120-Tonne All Terrain Crane for Modular Home Lifting MikePhua 0 7 6 hours ago
Last Post: MikePhua
  Buying Your First Excavator: The Volvo EC160CL MikePhua 0 7 6 hours ago
Last Post: MikePhua
  Brush Cutters: Key Features, Uses, and Maintenance MikePhua 0 4 7 hours ago
Last Post: MikePhua
  Fuel Priming Procedure for the CAT 320CL Excavator MikePhua 0 9 7 hours ago
Last Post: MikePhua
  Electrical System Overview for the Doosan DX140W Wheeled Excavator MikePhua 0 8 7 hours ago
Last Post: MikePhua
  Case CX28 Excavator: A Comprehensive Overview MikePhua 0 10 7 hours ago
Last Post: MikePhua
  Glow Plug Control Issues on the CAT 301.7D CR Excavator MikePhua 0 11 7 hours ago
Last Post: MikePhua
  Why Is There No Heat in a 2013 John Deere 135D Excavator MikePhua 0 9 8 hours ago
Last Post: MikePhua
  Volvo EC210B Excavator Training and Operational Mastery MikePhua 0 5 8 hours ago
Last Post: MikePhua
  Securing a Mini Excavator in a Dump Trailer MikePhua 0 8 8 hours ago
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)