6 hours ago
The Takeuchi TB180FR is a versatile midi excavator designed to deliver a blend of power, precision, and flexibility in a compact zero tail swing format. This model suits a wide range of construction, landscaping, and utility tasks, especially in confined job sites where maneuverability and reach are paramount.
Design and Dimensions
The TB180FR stands out with its zero tail swing configuration, meaning the rear of the excavator does not extend beyond the width of its tracks when rotating. This feature is essential for working safely and efficiently in tight urban or wooded areas without risking damage to surrounding structures or the machine itself. The machine's transport length is about 20.3 feet (6,172 mm), allowing reasonably easy road transport and site access. Its width to the outside of the tracks is approximately 7.6 feet (2,310 mm), and its shipping height is around 9.1 feet (2,770 mm), a profile tailored for both compactness and operator comfort.
This excavator offers an impressive maximum digging depth close to 14.9 feet (4,547 mm), making it capable of digging deep trenches and foundations beyond typical compact excavator limits. Its maximum reach along the ground is about 23.1 feet (7,035 mm), while the maximum loading height reaches roughly 15.3 feet (4,648 mm). These dimensions combine to provide excellent leverage and operational versatility.
Engine and Hydraulic Performance
The TB180FR is powered by a reliable Yanmar 4TNV98 engine, a turbocharged 4-cylinder diesel unit with a displacement of 3.3 liters (202 cubic inches). This engine delivers around 60.5 horsepower (45.1 kW) at 2,200 RPM and generates a maximum torque of approximately 184 lb-ft (250 Nm) at 1,320 RPM. The power unit meets interim Tier 4 emissions standards, reflecting compliance with modern environmental regulations.
Supporting this engine is a robust hydraulic system with a relief valve pressure set at about 3,989 psi (27,503 kPa) and a total pump flow capacity reaching 52.5 gallons per minute (198 liters per minute). This hydraulic power drives multiple functions including boom, arm, bucket, and auxiliary attachments with precision and strength. The machine features variable displacement piston pumps for efficient flow management.
Undercarriage and Mobility
The TB180FR rides on tracks with a width of approximately 17.7 inches (450 mm) and a ground contact length close to 7.3 feet (2,210 mm). This setup ensures a ground pressure of around 5.5 psi (37.9 kPa), striking a balance between traction and minimal soil disturbance—important for landscaping, agricultural, and soft ground tasks.
The excavator has a two-speed travel system with automatic shifting that provides a maximum travel speed of roughly 3.4 mph (5.6 km/h). The swing speed is about 10 rpm, allowing for controlled operation in restricted spaces.
Operator Environment and Features
The cab of the TB180FR offers a roomy and ergonomic workspace designed to reduce operator fatigue and enhance productivity. It includes a spacious seat with adjustable positioning, well-placed joysticks, and clear visibility through large windows. Features such as work lights on the boom and side cover improve job site safety and versatility by enabling work during low-light conditions.
Advanced electrical monitoring provides audible and visual alerts for engine status, low oil pressure, coolant temperature, and other operational parameters, helping prevent downtime through early warnings.
Practical Applications and Anecdotes
The TB180FR finds favor among contractors working in urban projects requiring access to confined lots or along busy roads where zero tail swing is invaluable for safety. For example, a landscaping company utilized the TB180FR to install irrigation systems and grading in a public park with delicate trees close to the work zone. The compact design and precision controls allowed the crew to work near root zones without causing damage, demonstrating the machine’s finesse beyond brute strength.
In another instance, municipal utility crews deployed the TB180FR for underground cable laying and trenching in narrow residential streets where conventional larger excavators could not operate efficiently without traffic disruption.
Maintenance Advice and Enhancements
Routine maintenance includes regular hydraulic fluid changes, engine oil and filter replacements, and track tension adjustments to maintain optimal performance. Operators should monitor hydraulic hoses and fittings closely, as high-pressure leaks can lead to costly downtime.
For enhanced durability in abrasive or rocky soil, upgrading to hardened bucket teeth and heavy-duty protective guards on the boom and undercarriage can extend machine life. Those frequently transporting the TB180FR are advised to use a suitable trailer rated for its operating weight of about 18,370 pounds (8,330 kg) and dimensions to ensure safety and compliance.
Summary of Key Parameters
Design and Dimensions
The TB180FR stands out with its zero tail swing configuration, meaning the rear of the excavator does not extend beyond the width of its tracks when rotating. This feature is essential for working safely and efficiently in tight urban or wooded areas without risking damage to surrounding structures or the machine itself. The machine's transport length is about 20.3 feet (6,172 mm), allowing reasonably easy road transport and site access. Its width to the outside of the tracks is approximately 7.6 feet (2,310 mm), and its shipping height is around 9.1 feet (2,770 mm), a profile tailored for both compactness and operator comfort.
This excavator offers an impressive maximum digging depth close to 14.9 feet (4,547 mm), making it capable of digging deep trenches and foundations beyond typical compact excavator limits. Its maximum reach along the ground is about 23.1 feet (7,035 mm), while the maximum loading height reaches roughly 15.3 feet (4,648 mm). These dimensions combine to provide excellent leverage and operational versatility.
Engine and Hydraulic Performance
The TB180FR is powered by a reliable Yanmar 4TNV98 engine, a turbocharged 4-cylinder diesel unit with a displacement of 3.3 liters (202 cubic inches). This engine delivers around 60.5 horsepower (45.1 kW) at 2,200 RPM and generates a maximum torque of approximately 184 lb-ft (250 Nm) at 1,320 RPM. The power unit meets interim Tier 4 emissions standards, reflecting compliance with modern environmental regulations.
Supporting this engine is a robust hydraulic system with a relief valve pressure set at about 3,989 psi (27,503 kPa) and a total pump flow capacity reaching 52.5 gallons per minute (198 liters per minute). This hydraulic power drives multiple functions including boom, arm, bucket, and auxiliary attachments with precision and strength. The machine features variable displacement piston pumps for efficient flow management.
Undercarriage and Mobility
The TB180FR rides on tracks with a width of approximately 17.7 inches (450 mm) and a ground contact length close to 7.3 feet (2,210 mm). This setup ensures a ground pressure of around 5.5 psi (37.9 kPa), striking a balance between traction and minimal soil disturbance—important for landscaping, agricultural, and soft ground tasks.
The excavator has a two-speed travel system with automatic shifting that provides a maximum travel speed of roughly 3.4 mph (5.6 km/h). The swing speed is about 10 rpm, allowing for controlled operation in restricted spaces.
Operator Environment and Features
The cab of the TB180FR offers a roomy and ergonomic workspace designed to reduce operator fatigue and enhance productivity. It includes a spacious seat with adjustable positioning, well-placed joysticks, and clear visibility through large windows. Features such as work lights on the boom and side cover improve job site safety and versatility by enabling work during low-light conditions.
Advanced electrical monitoring provides audible and visual alerts for engine status, low oil pressure, coolant temperature, and other operational parameters, helping prevent downtime through early warnings.
Practical Applications and Anecdotes
The TB180FR finds favor among contractors working in urban projects requiring access to confined lots or along busy roads where zero tail swing is invaluable for safety. For example, a landscaping company utilized the TB180FR to install irrigation systems and grading in a public park with delicate trees close to the work zone. The compact design and precision controls allowed the crew to work near root zones without causing damage, demonstrating the machine’s finesse beyond brute strength.
In another instance, municipal utility crews deployed the TB180FR for underground cable laying and trenching in narrow residential streets where conventional larger excavators could not operate efficiently without traffic disruption.
Maintenance Advice and Enhancements
Routine maintenance includes regular hydraulic fluid changes, engine oil and filter replacements, and track tension adjustments to maintain optimal performance. Operators should monitor hydraulic hoses and fittings closely, as high-pressure leaks can lead to costly downtime.
For enhanced durability in abrasive or rocky soil, upgrading to hardened bucket teeth and heavy-duty protective guards on the boom and undercarriage can extend machine life. Those frequently transporting the TB180FR are advised to use a suitable trailer rated for its operating weight of about 18,370 pounds (8,330 kg) and dimensions to ensure safety and compliance.
Summary of Key Parameters
- Operating Weight: Approximately 18,370 lbs (8,332 kg)
- Engine: Yanmar 4TNV98, 4-cylinder diesel, 3.3 L displacement
- Horsepower: Around 60.5 HP (45.1 kW) at 2200 RPM
- Torque: Approximately 184 lb-ft (250 Nm) at 1320 RPM
- Maximum Digging Depth: About 14.9 ft (4,547 mm)
- Maximum Reach Along Ground: Roughly 23.1 ft (7,035 mm)
- Maximum Loading Height: Around 15.3 ft (4,648 mm)
- Track Width: 17.7 in (450 mm)
- Ground Pressure: Approximately 5.5 psi (38 kPa)
- Travel Speed: Up to 3.4 mph (5.6 km/h)
- Hydraulic System Pressure: Around 3,989 psi (27,503 kPa)
- Hydraulic Flow Capacity: Up to 52.5 gal/min (198 L/min)
- Zero Tail Swing Radius: Approximately 4.1 ft (1,244 mm)
