Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Building a Disc Slasher for Excavator-Based Land Clearing
#1
Designing a disc slasher for a 23-ton excavator requires careful integration of hydraulic capacity, structural durability, and cutting efficiency. While commercial units like Slashbuster offer turnkey solutions, custom fabrication can yield comparable performance at a fraction of the cost—if engineered correctly.
Purpose and Application of Disc Slashers
Disc slashers are high-speed rotary cutters mounted to excavators or skid steers for forestry clearing, brush reduction, and stump destruction. Unlike drum mulchers, which grind material slowly and neatly, disc slashers use momentum and impact to shatter vegetation quickly. They are ideal for remote clearing, utility corridor maintenance, and firebreak construction.
  • Cutting Diameter: Typically ranges from 36" to 60"
  • Tooth Type: Replaceable carbide or steel teeth, often sourced from Quadco or similar forestry suppliers
  • RPM Range: 350–2200 RPM depending on motor selection and application
  • Inertia: Heavy discs (1"–1.25" thick) store rotational energy, improving cutting power but requiring more startup torque
Hydraulic Requirements and Motor Selection
A 23-ton excavator typically offers dual hydraulic pumps with combined flow exceeding 250 liters per minute at pressures up to 320 bar (4600 psi). To harness this power effectively:
  • Motor Type: Piston motors are preferred over gear motors due to shock resistance and longevity
  • Flow Allocation: Diverting 50% of total flow to the cutter head allows simultaneous boom and slew operation
  • Horsepower Target: 140 HP at the cutter head is achievable with proper motor sizing and pressure management
  • Speed Control: A higher-speed motor with lower displacement may reduce torque but improve recovery time
A forestry contractor in British Columbia reported using a Koehring saw head salvaged from a feller buncher, retrofitted with custom tooth holders. The unit ran at 2200 RPM and lasted over 8000 hours before requiring bearing service.
Structural Design and Bearing Selection
The disc must be mounted securely to withstand lateral loads and vibration. Key components include:
  • Overhung Load Adapter: A bearing block with a flanged face and multiple bolt holes to secure the disc
  • Disc Material: Bisalloy 80 or equivalent wear-resistant steel, 1.125" thick for a 48" swath
  • Guarding: Reinforced cab and boom protection to deflect flying debris
  • Tooth Layout: Staggered pattern with 2" Quadco teeth for aggressive cutting and reduced regrowth
Performance Characteristics and Field Behavior
  • Low RPM (350–500): Shatters stumps and inhibits regrowth, ideal for rough clearing
  • High RPM (1000+): Produces cleaner cuts but may encourage vegetation rebound
  • Startup Lag: Heavy discs take time to reach operating speed, especially with passive hydraulic systems
  • Recovery Time: After impact, disc speed drops and must rebuild momentum—motor selection affects this
Operators in Australia have compared Slashbuster units to FAE drum mulchers. While drum types offer cleaner finishes and safer operation near structures, disc slashers excel in speed and durability. A disc can fell a 3-foot tree by undercutting both sides, while a drum must grind through the trunk slowly.
Cost Considerations and Alternatives
  • Commercial Units: Slashbuster models can exceed $68,000 USD, often more with shipping and taxes
  • Custom Builds: Using salvaged saw heads, aftermarket motors, and fabricated frames can reduce costs by 60–70%
  • Used Market: Auctions like Ritchie Bros. in Canada offer surplus Koehring and Quadco heads at steep discounts
Recommendations for Builders
  • Consult a hydraulic specialist to calculate flow, pressure, and motor specs
  • Use divertor valves to manage pump output and preserve machine functions
  • Balance disc weight and diameter to match available horsepower
  • Test RPM ranges to find optimal cutting speed for local vegetation
  • Invest in guarding and safety—flying debris is a serious hazard
Conclusion
A well-designed disc slasher can transform an excavator into a formidable land-clearing tool. With careful attention to hydraulic integration, structural engineering, and cutting dynamics, custom-built units can rival commercial models in performance and durability. For contractors working in rugged terrain or remote forestry zones, the disc slasher remains a powerful and cost-effective solution.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Choosing the Right Excavator Size for Your Project MikePhua 0 13 4 hours ago
Last Post: MikePhua
  Building Fire Breaks with Compact Track Loaders (CTL) MikePhua 0 9 4 hours ago
Last Post: MikePhua
  Should You Replace a Clutch Fan with Direct Drive on Your Excavator MikePhua 0 11 4 hours ago
Last Post: MikePhua
  Komatsu PC75UU-2 Excavator: Insights and Key Considerations MikePhua 0 10 5 hours ago
Last Post: MikePhua
  Should You Buy an Excavator That Has Been Submerged MikePhua 0 9 5 hours ago
Last Post: MikePhua
  Buying Your First Excavator: The Volvo EC160CL MikePhua 0 7 6 hours ago
Last Post: MikePhua
  Fuel Priming Procedure for the CAT 320CL Excavator MikePhua 0 9 7 hours ago
Last Post: MikePhua
  Electrical System Overview for the Doosan DX140W Wheeled Excavator MikePhua 0 8 7 hours ago
Last Post: MikePhua
  Case CX28 Excavator: A Comprehensive Overview MikePhua 0 10 7 hours ago
Last Post: MikePhua
  Glow Plug Control Issues on the CAT 301.7D CR Excavator MikePhua 0 11 7 hours ago
Last Post: MikePhua
  Why Is There No Heat in a 2013 John Deere 135D Excavator MikePhua 0 9 8 hours ago
Last Post: MikePhua
  Volvo EC210B Excavator Training and Operational Mastery MikePhua 0 5 8 hours ago
Last Post: MikePhua
  Securing a Mini Excavator in a Dump Trailer MikePhua 0 8 8 hours ago
Last Post: MikePhua
  CAT 325 Excavator on a Landoll Trailer: Considerations and Best Practices MikePhua 0 4 8 hours ago
Last Post: MikePhua
  Case 1845C with Mulcher Bush Hog: A Powerful Combination for Land Clearing MikePhua 0 4 8 hours ago
Last Post: MikePhua

Forum Jump:


Users browsing this thread: 1 Guest(s)