+- Excavator Forum (https://www.panswork.com)
+-- Forum: Diesel Power Talking (https://www.panswork.com/forum-1.html)
+--- Forum: Operator Talking (https://www.panswork.com/forum-44.html)
+--- Thread: New Holland LS 180 Skid Steer Running Issue and Solutions (/thread-6797.html)
New Holland LS 180 Skid Steer Running Issue and Solutions - MikePhua - 07-05-2025
The user reported a running issue with the New Holland LS 180 skid steer loader. Although the engine runs normally, the machine experiences power loss or stalls during operation, making it impossible to continue working. This problem could be related to the fuel system, air filtration system, electrical system, or hydraulic system.
Troubleshooting and Solution Steps
- Check the Fuel System
Fuel supply issues can cause the engine to lose power or fail to run consistently. Start by inspecting the fuel filter to ensure it is not clogged or contaminated. Check the fuel pump to confirm it is providing stable fuel pressure. If the fuel pump is malfunctioning or the filter is clogged, it will need to be replaced. Ensure there are no leaks in the fuel lines and that the fuel supply is normal.
- Inspect the Air Filtration System
A clogged air filter can restrict airflow to the engine, causing performance issues. Check the air filter for dirt or damage. If it is dirty or worn, it should be cleaned or replaced. Also, inspect the intake hoses for leaks or damage to ensure proper airflow to the engine.
- Inspect the Electrical System
Electrical system failures can also prevent the skid steer from running smoothly. Check the battery voltage to ensure the battery is fully charged. Inspect the electrical connections, fuses, and circuit boards for loose or shorted connections. If the electrical system has faults, repair or replace the necessary components.
- Inspect the Hydraulic System
Hydraulic system issues can lead to a loss of power or abnormal machine operation. Check the hydraulic fluid levels and quality, ensuring the fluid is not contaminated. Inspect the hydraulic pump and valves to confirm they are working properly. If the hydraulic fluid is contaminated or the pump is malfunctioning, replace the fluid and clean the filters.
- Check the Drive System
If the above steps do not resolve the issue, the drive system should be inspected. Verify that the transmission and drive shafts are not damaged or malfunctioning. Wear or damage to components in the drive system can also cause the skid steer to fail to operate properly. Check the condition and level of the gear oil to ensure the transmission is properly lubricated.
The running issue in the New Holland LS 180 skid steer loader can be caused by several factors, including problems with the fuel system, air filtration system, electrical system, hydraulic system, or drive system. By systematically checking and troubleshooting each system, users can effectively resolve power loss or stalling issues. Regular maintenance and inspections of these systems can improve the machine's performance and extend its lifespan.