+- Excavator Forum (https://www.panswork.com)
+-- Forum: Diesel Power Talking (https://www.panswork.com/forum-1.html)
+--- Forum: Operator Talking (https://www.panswork.com/forum-44.html)
+--- Thread: 1999 CAT 246 Issues and Solutions (/thread-6763.html)
1999 CAT 246 Issues and Solutions - MikePhua - 07-05-2025
On the panswork forum, a user shared issues they encountered with their 1999 CAT 246 skid steer. The main problems involved the machine operating erratically, requiring troubleshooting and repairs to restore its normal functionality.
Engine Starting Issues
The first problem mentioned was difficulty in starting the engine, despite the battery being fully charged and the starting voltage being normal. Upon further inspection, the issue was traced to the starter motor and electrical system. It appeared that loose wiring or a faulty electrical component was preventing the starting system from functioning properly. A key step to resolve this issue is to check the starter motor and all connections, ensuring that contact points are clean and secure.
Hydraulic System Problems
Another issue involved the hydraulic system. The user reported slow operation of the lift arms or other hydraulic components. After diagnosis, it was found that the hydraulic fluid was either low or there was a leak in the system. Changing the hydraulic fluid and checking seals were critical to solving this issue. It's essential to ensure that the hydraulic fluid is of the proper quality and at the correct level, and that all hydraulic hoses and fittings are leak-free.
Transmission System Problems
Transmission issues also affected the normal operation of the CAT 246. The user noticed that the machine’s speed was unstable, particularly under heavy load. Upon analysis, it was likely due to a malfunctioning drive motor or issues with the transmission system. Replacing or repairing the drive motor and checking the transmission oil level can help resolve this issue.
Solutions and Recommendations
- Check the Electrical System and Starter Motor: Ensure all electrical connections are secure, clean the contact points, and check the condition of the starter motor.
- Inspect the Hydraulic System: Replace the hydraulic fluid, check for leaks in the hydraulic system, and inspect the integrity of seals.
- Inspect the Drive Motor and Transmission: Check the condition of the drive motor and ensure the transmission oil level is adequate.
- Regular Maintenance and Inspections: Perform regular maintenance, checking electrical, hydraulic, and transmission systems to prevent issues.
The issues faced by the 1999 CAT 246 skid steer, such as engine starting problems, hydraulic system failures, and transmission issues, can typically be resolved through thorough inspection and repair. Regular maintenance and early troubleshooting are essential for ensuring the equipment runs smoothly, minimizing downtime during operations.