+- Excavator Forum (https://www.panswork.com)
+-- Forum: Diesel Power Talking (https://www.panswork.com/forum-1.html)
+--- Forum: Operator Talking (https://www.panswork.com/forum-44.html)
+--- Thread: CAT 226B No Power to Dash (/thread-6753.html)
CAT 226B No Power to Dash - MikePhua - 07-05-2025
On the panswork forum, a user reported that their CAT 226B skid steer was experiencing an issue where there was no power to the dash. This meant the vehicle’s electrical system was not functioning properly, and the operator could not read any information from the dashboard. This is a significant problem, as the dashboard provides crucial information for the operator about the machine's working condition.
Initial Checks and Troubleshooting
When dealing with this type of issue, the first step is to check the power supply. According to the user's description, the dash had no response, so the problem could be related to the electrical connections, fuses, or wiring.
- Check the Fuses
- The user should start by checking the fuses related to the dashboard. The CAT 226B has several fuses, and one may have blown, cutting power to the dash. Fuses can burn out or wear down over time, so it’s important to check and replace them regularly.
- The user should start by checking the fuses related to the dashboard. The CAT 226B has several fuses, and one may have blown, cutting power to the dash. Fuses can burn out or wear down over time, so it’s important to check and replace them regularly.
- Inspect Electrical Connections
- Next, inspect the electrical connections behind the dashboard to ensure they are not loose or damaged. Loose connections can prevent a stable current from reaching the dash, resulting in no display.
- Next, inspect the electrical connections behind the dashboard to ensure they are not loose or damaged. Loose connections can prevent a stable current from reaching the dash, resulting in no display.
- Battery Voltage
- Check the battery voltage to ensure it’s within the correct range. If the battery is too low or faulty, the entire electrical system may fail to power up. Make sure the battery is fully charged and in good condition.
- Check the battery voltage to ensure it’s within the correct range. If the battery is too low or faulty, the entire electrical system may fail to power up. Make sure the battery is fully charged and in good condition.
- Check Grounding System
- Grounding issues could also be a cause of the electrical failure. Ensure that the ground wire is securely connected and free of any corrosion or oxidation that might prevent proper electrical flow.
- Grounding issues could also be a cause of the electrical failure. Ensure that the ground wire is securely connected and free of any corrosion or oxidation that might prevent proper electrical flow.
By following the above troubleshooting steps, users can often resolve the no power to the dash issue themselves. If none of these checks reveal the cause of the problem, it’s recommended to contact a professional technician to further inspect the electrical system. The issue may lie deeper within the wiring or electrical components, requiring more detailed diagnostics.
Conclusion
The no power to the dash issue on the CAT 226B skid steer can typically be resolved by checking the fuses, electrical connections, battery voltage, and grounding. By following these steps, users can usually get their machine back in working order. However, if the issue persists, seeking professional assistance is recommended for a thorough inspection.